FX Parameters
Reverb Models
5•1
reverb MoDels
This chapter describes the 11 Reverb models we ported from the Line 6 Verbzilla pedal,
one of our most popular stomps in the ToneCore family, plus the new Particle Verb. All
Reverbs are stereo, and they sound best routed towards the end of your FX chain.
Parameter Details
As indicated in the Reference Table below, all M9 & M13 Reverb models are set up the
same way with the exception of Particle Verb. Mix is persistent for all Reverbs (your Mix
level will stay the same when you load a different Reverb model). Knobs 1 thru 5 control
the following for all Reverb models:
• Knob 1: Decay time.
• Knob 2: Pre-delay time, adjustable from 20 to 200 milliseconds.
• Knob 3: No assignment for the Reverb models.
• Knob 4: Overall Tone of the wet reverb signal.
• Knob 5: Mix from 0% (dry) to 100% (at 100% you’ll hear wet reverb signal only)
Reverb Models Reference Table : Controls & Parameters
Model Knob 1 Knob 2 Knob 3 Knob 4 Knob 5
‘63 Spring Decay Pre-Delay - Tone Mix
Spring Decay Pre-Delay - Tone Mix
Plate Decay Pre-Delay - Tone Mix
Room Decay Pre-Delay - Tone Mix
Chamber Decay Pre-Delay - Tone Mix
Hall Decay Pre-Delay - Tone Mix
Ducking Decay Pre-Delay - Tone Mix
Octo Decay Pre-Delay - Tone Mix
Cave Decay Pre-Delay - Tone Mix
Tile Decay Pre-Delay - Tone Mix
Echo Decay Pre-Delay - Tone Mix
Particle Verb Dwell Gain - Hazard/Stable Mix