User Manual

Memory Footswitches - Each FX Unit has 3 memories (A/B/C). Only
one memory can be active at a time: its footswitch will be brightly lit,
and colored to show the effect type. Inactive switches are dimly lit
colored to show the effect type. Step on a footswitch to activate that
memory. Step on an active memory switch to bypass the FX Unit.
TAP - Tap tempo is available for all Delay effects, most MOD effects, and
some Filter effects. For Delay and MOD effects turn the second top row
knob or for Filters turn the first bottom row knob of the FX Unit all the
way to max, and you’ll switch between tap tempo and regular control
modes. Once you’re in Tap tempo control mode, turn the knob to select
one of the available note values. Tap 2 or more times on the
TAP switch,
and all the effects set to tap tempo control will change their time/speed/
tempo to match the tempo you tapped. To end tap tempo operation
for an effect, turn the knob to max again.
NOTE: Parameters set to tap
tempo control are NOT affected by expression pedal operation.
50 50
b #
MUTE
AUDIO
440
REF
E
Press and Hold TAP to activate the tuner (effects and looper will be
disabled). Use your lower left parameter knob to set your reference
frequency. Use the lower right parameter knob to select either “
BYPASS
AUDIO” or “MUTE AUDIO” for silent operation. Press tap again to exit
the tuner.