HX Edit Pilot's Guide

Table Of Contents
6
GUI Overview
HX Edit has a very intuitive, easy-to-use interface. The main application window auto-
matically detects your specic Helix or HX device type and displays all its options within
the main application window.
TIP: As covered in “Multi-Device, Multi-Window Support” on page 3, if you
have more than one device connected, a separate application window is available
for each device.
Within the application window, the navigation is divided into three main sections:
The Librarian Window - For managing preset and Impulse Response (IR) les.
The Signal Flow Window - Where you can add and move amp, eects & mix
blocks, and customize your complete signal path routing.
The Inspector Window - Where you can choose from the huge selection of mod-
els, edit their parameters, create bypass & controller assignments, and more.
Show/Hide
Librarian
Impulses
Tab
Presets
Tab
Signal Flow
Window
EDITOR
LIBRARIAN
Edit TabMy Account/Preferences
Menu
Bypass/Controller
Assign Tab
Inspector
Window
The HX Edit main GUI (Helix Floor device)
HX Stomp & HX Effects Device Owners: With an HX device connected, its
application window displays the single signal ow, just as on your HX hardware
screen. As covered in this chapter for Helix devices, you can utilize the applica-
tion's signal ow to bypass, move, clear, copy & paste blocks, create split
paths, and more.
The HX Edit signal ow - with an HX Stomp connected
The HX Edit signal ow - with an HX Eects connected
TIP: The Command Center, for creating MIDI control assignments (Helix and HX
Eects only) and Global EQ (Helix and HX Stomp only) are available as separate
windows from the application's Window menu.
Resizing the Application Window
The HX Edit main application window is resizable, allowing you to adjust it to best t
your screen size and workow. Simply click and drag any corner or edge of the window
to adjust to the preferred size, or click the “Maximize” button at the top of the window
to use it in full screen mode. If you have multiple devices connected, each device's ap-
plication window is independently resizable.
It is also possible to show or hide the Presets & Impulses Librarian panel, by clicking on
the toggle button at the top left of the Signal Flow window.
The Librarian window Show/Hide toggle button