HX Edit Pilot's Guide

28
TIP: Click on the desired slider within the HX Edit Edit tab and use the “Alt+click” or
“S” keyboard shortcuts to instantly create a Snapshots controller assignment.
3. Unlike with other controller types, you won't see any options in the right of the
Bypass/Controller tab for a Snapshots controller assignment.
A snapshots assignment is created - there are no congurable options for this assignment type
With this assignment created for the parameter, simply choose the desired
snapshot from the Snapshots Menu at the top of the HX Edit application win-
dow, and then whatever value you set for this parameter is automatically stored
and recalled with the snapshot. This allows you to congure up to 8 dierent
values on Helix devices (or 4 values on HX Eects, or 3 values on HX Stomp) for
each preset - one for each available snapshot. Please see your device's Owner's
Manual for details on using snapshots.
Multiple Controller Assignments
Just as on the hardware, you can only assign a parameter to one Controller at a time.
However, it is possible to assign multiple parameters to one common Controller, (for ex-
ample, to simultaneously control the Mix parameters of two eects with an EXP Pedal
to blend between them). It is also possible to create additional Bypass assignments
and/or Command Center assignments on footswitches that also include Controller as-
signments - see the respective sections for more on these assignment types.
NOTE: (Helix and HX Eects devices only) If a footswitch includes one or more
additional block Bypass, Controller or Command Center assignments, the default
label appears as Multiple (X) with “X” being the number of assignments. You can
optionally customize the footswitch label - see “Customizing a Footswitch Label” on
page 24.
The footswitch label can also be customized within the Customize label eld within the
Command Center window, with the latest customization edit aecting the label in all
places. See the next chapter.