HX Edit Pilot's Guide

14
Working in the Editor
The Editor portion of the HX Edit user interface consists of the Signal Flow and Inspector windows. The Signal Flow Window is where you'll see the signal paths for your currently-
loaded preset, appearing much like the Home screen of your Helix, or Signal Flow screen of your HX device. The Inspector Window below contains 2 tabbed panels, Edit & Bypass/
Controller Assign, where you can select models, tweak parameters, congure controllers and more. Regardless which of these tabs you have selected, the current preset's Name Field,
Save, Snapshots & Tempo options are always available at the top of the window. Additionally, there are dedicated windows for the Command Center for MIDI assignments (Helix & HX
Eects only - see page 29), and the Global EQ (Helix & HX Stomp only - see page 31), accessible from the application's Window menu. If you have not already done so, be sure
to read through the in-depth information in your device's Owner's Manual to get an understanding of the features we'll be covering in the following sections.
HX Device Owners: HX Edit application functionality described within this chapter is the same with Helix or HX devices, except where noted.
Preset Name Field
Preset Save Button Snapshots Menu Tempo Controls
Edit & Bypass
Controller Assign Tabs
Signal Flow Window
Librarian Show/Hide
Button
Inspector Window
The Editor portion of the HX Edit application (Helix device)