HX Edit Pilot's Guide

40
Signal Flow Window - Shortcuts
Command Mac PC Function - These shortcuts perform the following functions when the Signal Flow window has focus
Navigate Selection
Selects and cycles through blocks within the Signal Flow
Edit Tab
Return
Enter
Activates the Edit tab, displays the edit options for the selected block, and gives focus to the Model Category of the
selected block's model
Display Block
Context Menu
Shift
+
Return
Enter
or
Ctrl
+
or
Shift
+
Return
Enter
or
Displays the block's context menu*
Block Bypass
Toggle
Spacebar
Toggles the bypass state of the selected block
Amp Block Select
(Helix & HX Eects
devices)
A
Selects and cycles through selecting the Amp, Amp+Cab and Preamp blocks in the current preset
Block Select
Single-click
Selects a block or empty block location
Display Edit tab -
Model Browser
Double-click
Double click on any block or empty block location to display the Model Browser to choose a model
*Open context menus can be navigated by arrow keys, where ENTER makes a selection, and ESC dismisses the open menu.
Inspector Window - Shortcuts
Command Mac PC Edit Tab Focus* Bypass/Controller Assign Tab Focus
Edit Tab
E
or
H
No function Displays and places focus on the Edit tabbed panel
Bypass/Controller
Assign Tab
B
or
C
Displays and places focus on the Bypass/Controller
Assign tabbed panel
No function
Select Previous/Next
Parameter or List
Advances the focus to the previous or next parameter
slider or list
(If Model Grid view is visible, Shift must be used to
advance focus out of Model Grid - see next shortcut)
No function
Select Previous/Next
Tabbed List
Shift
+
Advances the focus to the rst parameter on the previ-
ous or next tabbed list (if Amp+Cab or Dual Cab, or if
Variax input parameters are present)
No function
Snapshot Assign
Alt
+
Click directly on any parameter slider to quickly assign
its value to a Snapshots controller (or, when a param-
eter slider has focus, press S).
No function
Display Context
Menu
Shift
+
Return
Enter
or
Ctrl
+
or
Shift
+
Return
Enter
or
Display the context menu for the selected parameter
slider
Display the context menu for the selected Bypass or
Controller Assignment within the Assignments list
(Note that the Shift+Enter shortcut does not work within
this tab, but right click actions do)