AMPLIFi 30 / AMPLIFi 75 / AMPLIFi 150 PILOT’S GUIDE MANUEL DE PILOTAGE PILOTENHANDBUCH PILOTENHANDBOEK MANUAL DEL PILOTO 取扱説明書 40-00-0354-E Firmware v2.50.2 Pilot’s Guide also available at line6.com/support/manuals ©2016 Line 6, Inc.
Please Note: Line 6 and AMPLIFi are trademarks of Line 6, Inc., registered in the U.S. and other countries. FBV is a trademark of Line 6, Inc. All rights reserved. Apple, Mac, iPod touch, iPhone and iPad are trademarks of Apple, Inc. registered in the U.S. and other countries. App Store is a service mark of Apple, Inc. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. iOS is a trademark of Cisco in the U.S. and other countries.
THE GUITAR AMP, REINVENTED AMPLIFi 30/75/150 Features: • High-performance guitar amp • Bluetooth streaming audio device (compatible with iOS, Android and Mac or PC) • Stereo design delivers incredible sound quality when playing back music. AMPLIFi 75 & 150 offer an enhanced 5 speaker stereo system • AMPLIFi Remote app for iOS & Android devices.
5 6 A B C D 1 3 2 4 DRIVE BASS MID TREBLE FX REVERB BLEND AMPLIFi 75 & AMPLIFi 150 Top Panel Controls 1. Bluetooth Pairing Button - Using Bluetooth, your AMPLIFi amp will communicate wirelessly with your iOS or Android device. Before you run the AMPLIFi Remote app, set up Bluetooth with your mobile device as follows: • Enter Pairing Mode on your AMPLIFi amp by pressing its Bluetooth button - it will flash.
DRIVE: Adjusts the current amp model's Drive level. 5. TONE Preset Select Button - There are 4 onboard presets stored in your AMPLIFi amp's internal memory: Presets A, B, C and D. These can be overwritten at any time, replaced by up to 4 Favorite presets. BASS, MID, TREBLE: Adjusts the Bass, Mid and Treble levels for the current amp model's tone stack. FX: Adjusts the FX parameter saved with the preset and selected in the AMPLIFi Remote application.
. TAP Tempo Button - Pressing the TAP Tempo button a few times sets the tempo of delays and other FX that have a Tap Tempo feature. 7. Power (AMPLIFi 30) - Switch on the power with this button. To reset AMPLIFi to Factory settings, press and hold the Master Volume knob and Tone button at power up. Tuner Mode - Press and hold the TAP button for a few seconds to enter Tuner Mode. When you play a note on your guitar, the tuner will detect it automatically.
9 10 11 12 14 AMPLIFi 75 & AMPLIFi 150 Rear Panel Connections 9. Headphones (AMPLIFi 75 & 150) - Plug in your 1/4 inch stereo headphones cable here. Headphones volume is controlled by the Master Volume knob. *NOTE: As of this writing, FBV 3 footswitch LEDs illuminate in red (the FBV 3 assignable, multi-color LED feature is not currently supported for AMPLIFi devices). 10.
AMPLIFi Firmware Updates 13. Power Connection (AMPLIFi 30) - Supply power using the included 9VDC power adaptor. For optimal performance, always run the latest firmware in your AMPLIFi amplifier. Your AMPLIFi Remote application will inform you whenever a firmware update is available, so you'll always know you have the latest version! 14. Power Switch (AMPLIFi 75 & 150) - Switch on the power with this rocker switch, located just above the AC cable receptacle.
