User Manual

DL4 Delay Modeler
DL4 Delay Modeler
DELAY TIME MIXREPEATS TWEAK TWEEZ
LO RES DELAY
ANALOG W/ MOD
ANALOG ECHO
SWEEP ECHO
MULTI-HEAD
TAPE ECHO
TUBE ECHO
DIGITAL W/ MOD
RHYTHMIC DELAY
STEREO DELAYS
PING PONG
REVERSE
DYNAMIC DELAY
AUTO-VOLUME ECHO
DIGITAL DELAY
DL4 Delay Modeler P ROGRAMMABLE D ELAY & 14 S ECOND L OOP S AMPLER
LOOP SAMPLER
1
/
2 SPEED / REVERSEPLAY ONCEPLAY / STOPRECORD / OVERDUB
LOOP SAMPLER – RECORD/OVERDUB & PLAY/STOP FOOT SWITCHES
RECORD/OVERDUB
Press to start Recording (light comes on solid). If you press this switch a second time while recording, the
recording will finish, loop playback will immediately begin, and you’ll be in Overdub mode (light flashes).
With each pass of recording in overdub mode, the already-recorded sound gets a little quieter, fading away
entirely after many overdub passes.
PLAY/STOP
Once you’ve recorded the loop you like, you can start and stop it any time you like by jumping on this switch.
From Stop, pressing this starts playback from the beginning of the loop (light comes on solid). From Play
or Overdub, pressing it stops playback/overdub. You can also step on this switch while Recording to stop
the recording and start immediate loop playback.
Model Selector
This is where you select the special Loop Sampler mode of operation. While using the
Loop Sampler, the knobs and switches have special functions; true bypass is also disabled.
The Loop Sampler remembers the knob positions you set here and recalls them
when you come back to it. You can also use the optional expression pedal to control
the knob settings. Your loop can be up to 14 seconds long. (28 seconds at half speed!)
DELAY TIME MIXREPEATS TWEAK TWEEZ
LO RES DELAY
ANALOG W/ MOD
ANALOG ECHO
SWEEP ECHO
MULTI-HEAD
TAPE ECHO
TUBE ECHO
DIGITAL W/ MOD
RHYTHMIC DELAY
STEREO DELAYS
PING PONG
REVERSE
DYNAMIC DELAY
AUTO-VOLUME ECHO
DIGITAL DELAY
DL4 Delay Modeler P ROGRAMMABLE D ELAY & 14 S ECOND L OOP S AMPLER
LOOP SAMPLER
LOOP SAMPLER – KNOB FUNCTIONS
Mix
Controls the
volume of your
loop playback.
Delay Time (for Pre-Loop Echo)
We’ve provided you with a an echo unit in front
of your loop sampler. It’s got a maximum delay
time of 800 milliseconds, set by this knob. This
echo unit is before the loop sampler, so when you
record, you will record the echoes as well. Then,
when you play back the loop audio, it will play
with the recorded echoes. You can then turn the
echoes off while you play over the loop, or you
can choose a different echo time to play and
overdub with.
Repeats (for Pre-Loop Echo)
This sets the number of repeats for the
Pre-Loop Echo.
Tweak
Turn this up to add some modulation for
the Pre-Loop Echo.
Tweez
A volume control for the Pre-Loop Echo.
15
14