User's Manual

7. Channel Select – Press the Up or Down button next to the channel
display once to light the channel number indicator. Press either Up
or Down to change the channel. The channel number will ash 2
seconds after the channel is selected indicating the channel change
has been executed.
Note: The transmitted channel does not change while selecting the
Up and Down buttons in order to avoid conicting with other active
transmitters.
8. Auto-Sleep Switch – Place the switch in the position to enable this
feature. If enabled the transmitter will automatically go into standby/
sleep mode after two minutes without any movement or audio
detected. With this feature on you can turn down your volume knob
and place your guitar in a stand during set breaks and minimize your
battery drain without having to turn the transmitter o.
9. Micro USB – USB connectivity used for rmware updates should they
be needed in the future. Visit http://line6.com/software/
10. Battery Compartment – Requires two AA batteries for proper operation.
11. Battery Door – Slides open in 2 stops: 1st stop allows access to the
channel selection buttons and sleep switch, the 2nd stop provides
full access to removable batteries.