User's Manual

Transmitter Details
1 2
7
10
9
8
3
4
6
11
5
1. Battery Status – This LED illuminates green when the transmitter is
powered on, and > 1 hour of battery operation time remains. Flashes
yellow when < 1 hour, and ashes red when less than 30 minutes of
battery operation time remain.
Note: Battery operation time is calibrated for 2x AA Alkaline batteries
- actual times may vary when using non-alkaline batteries.
2. Guitar Input – Plug the included guitar cable here. To lock the cable,
simply plug in the end with the locking collar and gently twist the
collar so it threads onto the exposed thread of the transmitter’s input
jack, DO NOT OVERTIGHTEN. To unlock, spin the collar counter-
clockwise and pull the plug out.
Note: You can use regular ¼" guitar cables as well.
Remove the existing black nut and replace it with one of the included
5 colored marker nuts
3. Power On/Off – Turns power on when working batteries are installed.
The transmitter will automatically sync with the receiver in about 1
second.
4. Antenna – The calibrated internal antenna avoids damage or deformity
in normal use. Avoid covering the antenna with metallic fabrics or
accessories, and avoid direct contact with parts of the performer’s
body for best results.
5. Battery Door Release – Press on both sides of the transmitter at the
same time to open the battery door. See #11 below for more details.
6. Channel Display – Channel 1-16 is indicated after pressing either
channel select button (7).