User Manual

Operation - Edit Transmitter RF Output Power
Press Set once to power on transmitter or wake up the LCD (backlight should glow blue). Press Set three times to put the transmitter in RF Power
edit mode (“TX PWR” and the current value will continuously blink). Press Select once to choose this mode (”TX PWR” will stay solid and the
current value will continuously blink). Press Select again to choose the desired power setting (HI or LOW). Press Set to confirm new power setting
(”TX PWR” and the new value will be displayed automatically in the Main View). LCD will glow blue for 10 seconds and then fade off automatically.
Operation - Assigning the Transmitter a Name
Press Set once to power on transmitter or wake up the LCD (backlight should glow blue). Press Set five times to put the transmitter in Name edit
mode (“Name” will continuously blink). Press Select once to choose this mode. Press Select again to choose the desired character. Press Set to move
to the next position and continue this process until you’ve completed entering in the desired name. After making your final character selection in
the fourth position, press Set to complete the naming process. The display will now show its new name in the Main View.
Operation - Engage Control Lock-out Function
Press Set once to power on transmitter or wake up the LCD (backlight should glow blue). Press Set four times to put the transmitter in Lock edit
mode (the lock symbol and the current value will continuously blink). Press Select once to choose this mode (the lock symbol will stay solid and the
current value will continuously blink). Press Select again to choose the desired state. Once you’ve made your final selection, press Set once to put
the transmitter in the new state. While in the locked state, no changes can be made to the transmitter. However, the transmitter can be powered
down by pressing the Power/Set button for 5 seconds.
Note: Engaging Lock mode will automatically exit Mute mode. A locked microphone cannot also be muted.
Disabling Lock Function: To regain control of a locked transmitter, press and hold both the Set and Select buttons for five seconds.