User Manual

Overall System Specifications
Transmission Format: X2 proprietary digital audio transmission
Frequency Response: 20 Hz - 12 kHz
Audio Dynamic Range: >117 dB
Distortion: 0.03% THD
RF Carrier Frequency: 902 MHz to 928 MHz, FSK
Selectable Frequencies: Five
RF Output Power: 10mw
Audio Output Level: Unity gain with transmitter input
Polarity: Positive voltage at input yeilds positive voltage at output
Transmission Range: >150 feet line-of-sight (may vary due to local conditions)
FCC Approval: Part 15 approved, no user-license required
XDT1 Transmitter Specifications
A/D Conversion: 24-bit Delta Sigma, 128 times over sampling
Input Impedance: 1.3 M-Ohm
Connectors: 1/8" Unbalanced locking connector
Controls: Power On/Off, Channel Select
LED Display: Five segment - Power On, Channel, Battery Life,
Audio Level Meter
Dimensions: 2.4" W x .66" D x 4" H
Battery Life: Switching power supply, ~8 Hours (9v alkaline)
Weight: .25 lbs (with 9v battery installed)
XDR1 Receiver Specifications
D/A Conversion: 24-bit Delta Sigma, 128 times over sampling
Output: 2.12V RMS (Unbalanced: 7K-Ohm)
Connectors: 1/4" Unbalanced stereo output, tip= instrument voicing,
sleeve= full bandwidth
LED Display: Five segment - Power On, Data Link, Channel, Battery Life,
Audio Level Meter, RF Strength
Controls: Power On/Off, Channel/Mode Select
Dimensions: 3.078" W x 1.17" D x 4.7" H
Power Requirements: 9V DC via battery or optional AC power supply
Weight: .45 lbs (with 9v battery installed)
X2 Corporation • 4630 Beloit Drive, Suite 20 • Sacramento, CA 95838
Specifications