User Manual

ManualsBrandsLine 6 Digital Wireless ManualsElectronics900MHz ISM Band Digital Audio Transmitter

Symptom Cause Solution

No sound

System not turned on.

Improper connection or

improper channel

selection.

Check that the system is powered

on. Check that the transmitter and

receiver are set to the same operat-

ing channel. Check that the receiver

is receiving data. Check that the

source is operating correctly. Check

that the receiver displays audio

level. Check connections.

Intermittent sound or

distortion

Improper source

performance. Improper

connection. Multiple

transmitters are set to

the same operating

channel. Transmitter

has gone out of range.

Transmitting through

metal wall. Unknown

source of RF in local

vicinity.

Check source. Check connections.

Turn your transmitter off. Check to

see if receiver still displays data

being received. If so, locate and

either turn off or switch channels on

extra transmitter. Adjust receiver

positioning closer to transmitter.

Check that other local communica-

tion systems are not interfering with

your performance. They will most

likely be within close proximity to

receiver.

Troubleshooting

Refer All Servicing to X2

We believe that the D95 is one of the most reliable wireless systems that can be made using current

technology, and should provide years of trouble-free use. However, should problems occur, DO NOT

attempt to service the unit yourself. Service on this product should only be performed by X2. THERE

ARE NO USER SERVICEABLE PARTS INSIDE.

Obtaining Repair Service

Before contacting X2, check over all your connections, and make sure you’ve read the manual. Your

X2 dealer may be able to offer further assistance. If the problem persists, call X2 at 916-779-1040

and request the customer service department. Talk the problem over with one of our technicians; if

necessary, you will be given a return authorization (RA) number and instructions on how to return

the unit. All units must be shipped prepaid and COD shipments will not be accepted. For prompt

service, indicate the RA number on the shipping label. Tape a note to the top of the unit describing

the problem, include your name and phone number where X2 can contact you if necessary, as well

as instructions where you want the system returned. X2 will pay for 2nd-day shipping back to you on

any repair covered under the terms of this warranty.

Service address for customers in the USA:

X2 Corporation

4630 Beloit Drive, Suite 20

Sacramento, CA 95838