User Manual

Multi-system Operation

Up to five systems can operate simultaneously. In situations where it is necessary to have more than

one person wireless, each transmitter and receiver combination must be set to the same channel. Set

the first system to transmit and receive on channel “one”, the second system to transmit and receive

on channel “two”... and so on.

DigiScan™ Special Receiver Power Up Mode

While holding down the channel select button on the receiver, push the on/off button and release.

Continue to hold the channel select button until the LEDs are all solid red. Then release the channel

select button. The unit will now do a RF scan on all 5 frequencies. While in this mode the receiver

will continue to scan and report. If the channel has no RF signal then a blue LED will light for the

corrosponding channel number. If there is currently RF in the channel the LED will be red. Blue

LEDs mean channel is clear red means the channel is not clear. To enter regular operating mode

push and hold down the on/off button until the unit enters the normal mode.

Optimizing Your Wireless Performance

Place the receiver on or near the desired amplification system, pedalboard or with your effects ped-

als. FOR BEST RESULTS, PLACE RECEIVER HIGH ABOVE ANY OBSTRUCTIONS, as the sys-

tem works best when transmitter and receiver are in line of sight.

Battery Life Information

Fresh Alkaline batteries should last about 8 hours, NiCad rechargeable batteries will only last about

4.5 hours. Standard batteries are not recommended. THE BATTERY HOUR DISPLAY WILL ONLY

BE ACCURATE FOR ALKALINE BATTERIES. The battery life is calculated inside the each compo-

nent and displayed in 1 hour increments. Upon power up the battery info will take about one minute

to stabilize, the battery gauge is then accurate within + or - 30 min. You may use batteries until they

are completely drained without affecting the performance of the unit in any way.

Warranty Information

X2 will repair or replace any defective system within the first two years free of charge. X2 will cover 2-

day return shipping costs in the continental United States. This warranty is transferrable, but does not

cover abused systems. Terms and conditions subject to change without notice. Please retain a copy

of your dated sales receipt for proof of warranty status should repairs become necessary.

Warning:

Changes or modifications not expressly approved in writing by X2 Corporation may void the users

authority to operate this equipment.

This device complies with part 15 of the FCC rules. Operation is subject to the following two condi-

tions: (1) This device may not cause harmful interference, and (2) this device must accept any inter-

ference received, including interference that may cause undesired operation.

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe B est conforme à la norme NMB-003 du

Canada.

Q-Diversity™,FrequencyClear™ and DigiScan™ are trademarks of X2 Corportion.

XDS95 PATENTS PENDING.

Additional Information