User Manual

Created specifically for performing and recording musicians who demand
to be untethered without compromising their sound, the XDS95 24-bit digi-
tal wireless system delivers your tone and performance with the sound
and feel of a direct wire connection.
X2's proprietary digital technology provides superior fidelity while the XDS95’s "stomp-box" style
receiver houses a micro-processor that selects the digital data stream from among the four internally
mounted Q-diversity™ antennas to eliminate dropouts and interference including DTV. You’ll enjoy
the sound and performance of a direct wire connection free from compander ICs and the associated
'pumping' and 'breathing' that squashes your tone, and other problems associated with analog
wireless technology.
Operating the system is unlike any wireless you've tried before. Simply connect the transmitter to
the source via the 1/8" threaded-collar locking connector and the "stomp-box" style receiver to your
amplifier, mixer or pedal-board. Then power up making sure the transmitter and receiver are set to
the same channel. That's it. You're ready to go! No knobs to adjust and no antennas to loose or
break mean you're up and running in the time it would take to connect a cable.
About the XDS95 Digital Wireless System
All of this sound and performance is provided to you with an incredible feature set including:
• 24-bit digital converters yield 117 dB dynamic range to capture your most expressive performances
• Frequency Clear™ UHF Digital - a proprietary digital signal on a 900 MHz UHF carrier for freedom
from multipathing and interference, including DTV
• Five user-selectable channels (all five are fully compatible for simultaneous use)
• Auto-DigiScan™ to confidently select an open channel
• Frequency response all the way down to 20 Hz for truly thundering lows
• Stereo 1/4" output for instrument and full-bandwidth or 'tuner out' applications
• Five segment LED display (battery status, link status, audio level, RF level and channel)
With the XDS95 Digital UHF Wireless System you'll have the freedom and sound to deliver your most
expressive performance every time without any hassles or complicated setup procedures.
To familiarize you with your new digital wireless system, we suggest that you read through this entire
operation manual.
System Components
System includes:
• XDR1 Digital UHF Receiver
• XDT1 Digital UHF Transmitter
• 2 9v Alkaline Batteries
• 1/4” to 1/8” locking connector instrument cable
Optional Accessories:
• Power supply for XDR1
Introduction to the XDS95 Digital UHF Wireless
2