User Manual Firewire IEEE 1394A + USB 2.0 Combo Card SD-CBALINEC-4E6I All other company and product names are trademarks or registered trademarks of their respective owners.
About this card This ALi Firewire IEEE 1394A + USB 2.0 Combo card is design to offer a cost effective and reliability solution to the users with PC’s that have no integrated IEEE 1394A and USB 2.0 support. The Firewire IEEE 1394A ports uses the most advanced, high-speed digital technology, low-cost and high bandwidth isochronous (real-time) data interfacing between computers, computer peripherals and consumer electronics products such as camcorders, VCRs, printers, TVs, and digital cameras.
Pin Assignment for Internal USB connectors (If available) Installing the ALi Firewire IEEE 1394A + USB 2.0 Combo card Installing this ALi Firewire IEEE1394A + USB 2.0 Combo card to your computer is simple, just simply follow these steps. • • • • • • Turn off your computer and all external devices connect to it. Disconnect your computer from the power sources. Open the computer case. Refer to your computer user manual for more details. Find an available PCI slot and remove the slot bracket.
3. Installing ALi PCI to USB Enhanced Host Controller driver Installing Windows XP driver For Windows XP, you can use Microsoft EHCI driver for Windows XP or install the ALI EHCI driver we provided with this card. If you have decided to use the Microsoft EHCI driver, you need to download Windows XP Service Pack 1 for the Microsoft EHCI drivers. Please refer to “To download Windows XP Service Pack 1” on how to download the driver.
