User manual

English Manual English 6
The driver installation will proceed automatically.
When the installation is complete you will
see the login prompt appear on the workstation
screen.
Step 3
Repeat steps 1 & 2 for the remaining MWS8840s.
Verifying the MWS 8840 connection
Step 1
Open the MultiPoint Manager application and click on
the Hardware button. Each connected MWS8840 will
appear in the list of stations.
Adjusting the screen resolution
By default, Windows MultiPoint Server 2010 will select the recommended resolution for each
connected display. However, if you would like to choose a different resolution, follow these
steps:
Step 1
Boot the computer into Maintenance Mode by pressing the M key at the startup screen.