User manual

User Manual English
Notes:
1 Picture
 In Matrix mode, all four pictures are adjusted simultaneously.
 In Dual/TV Wall mode, each picture can be adjusted individually and supports the last memory
feature.
2 Output
In Matrix mode if the Output is set to 1080i@50Hz or 1080i@60Hz Input 4 will be disabled.
3 AUDIO EDID
Embedded input audio EDID contents:
 LPCM 2CH = LPCM 2CH
 LPCM 6CH = LPCM 2CH/ 6CH
 LPCM 8CH = LPCM 2CH/ 6CH/ 8CH
 BITSTREAM = LPCM 2CH, AC3, DTS
 HD = LPCM 2CH/ 6CH/ 8CH, AC3, DTS, Dolby Digital Plus, DTS-HD
4 TIMEOUT
Setting to OFF means that MENU and INFO will continuously be shown on the screen.
5 HDCP INPUT
 ACCEPT: Supports source using HDCP, this is normal source setting.
 NOT ACCEPT: Will not accept a source using HDCP.
6 HDCP OUTPUT:
 FOLLOW INPUT: If the Input source uses HDCP the Output signal will support HDCP. If th e Input
source does not use HDCP the Output signal will not support HDCP. When in Dual mode, if either of
the Input sources (Left or Right) uses HDCP, the output will support HDCP.
 ALWAYS ON: When using this setting all connected TV/Monitors must support HDCP. Using displays
which do not support HDCP will result in flashing image/no image when HDCP content is used.
7 BEZEL CORRECTION
This setting is only supported in TV Wall mode, after adjustment the system will save the setting until the
next time it is changed.
8 SAVE/RECALL
Used to SAVE/RECALL input/output settings and all other system settings such as bezel correction or
picture adjustment.
9 Ethernet RE-LINK:
After the setting up the system use this setting to re-link/refresh the network connec ti on.
10 Ethernet TIMEOUT:
Select OFF to end the time out functions of either the Ethernet or Telnet connection.