FireWire Repeater Hub 6 Port English User Manual LINDY No. 32916 www.lindy.
English User Manual Introduction The LINDY FireWire Repeater Hub adds IEEE-1394a compliant ports that support data transfer rates of 100, 200 and 400 Mbps, and automatically switch to the highest speed that the peripheral supports, to your computer.
English User Manual Installation and Operation 1. Insert the supplied FireWire cable in to the port on the back of the LINDY FireWire Repeater Hub. 2. Connect the other end of the FireWire cable to an available FireWire port on your computer. 3. You may also attach the supplied power supply, though this should only be required for use with FireWire peripherals with high power consumption.
Radio Frequency Energy, Certifications Shielded cables must be used with this equipment to maintain compliance with radio frequency energy emission regulations and ensure a suitably high level of immunity to electromagnetic disturbances. FCC Warning This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
