Wireless Projector Server User Manual English (Model Name: WPS-VideoPro) LINDY No. 32699 www.LINDY.
Table of Contents 1. Overview..................................................................................................... 4 2. Quick Start ................................................................................................. 6 3. Windows Client Utility ........................................................................... 9 3.1 Starting Program ................................................................................. 9 3.2 Login .............................................
6.4 Login Web Admin .............................................................................. 32 6.4.1 System Status ................................................................................. 33 6.4.2 Network Setup ............................................................................... 33 6.4.3 Projection Setup ............................................................................ 36 6.4.4 Change Passwords ........................................................................
English Manual 1. Overview WPS is a must-have device for your meeting room! It turns your existing "wired" projector into a "high-end wireless" projector. With the revolutionary Plug-and-Show, 4-to-1 split screen and PDA wireless projection features, WPS makes every of your presentation and meeting efficient and successful.
English Manual Macintosh(Mac) wireless Projection WPS supports Mac client connected and projected wirelessly. By launching the Mac client software that stored in accompanied USB token, WPS provide the same experience to Mac user to utilize the wireless presentation feature. Features ■ Support Windows Vista, XP, 2000 and Mobile 5/6 ■ Support Macintosh(Mac) version 10.4 and above.
English Manual 2. Quick Start 1) Connect projector VGA cable to WPS box VGA connector and turn on projector power. 2) Turn on WPS box. ♦ When Projector shows the default menu on the screen as below, it indicates the WPS box is ready now. 3) Make sure your PC WLAN is enabled already, and connect your PC with WPS box. 4) Open your browser and it will redirect to WPS main page automatically, or you can enter the IP address to access the WPS web home page. ♦ The default IP address of WPS is 192.168.100.
English Manual 5) Download the client software. Please select the” Windows Vista / XP/ 2000” or ”Windows Mobile 5.0” and execute the installation program. ♦ After installing the program, you will see the WPS shortcut on the PC screen.
English Manual 6) Make sure your personal firewall allows WPS software to pass through.
English Manual 3. Windows Client Utility 3.1 Starting Program After you download WPS Windows program via web page successfully, then follow below steps to start. 1) Click WPS icon to execute the program. 2) Program start to search for WPS box automatically, 3) If WPS box founded then “Login Code” dialog box will be pop up on the PC screen. Searching for WPS box WPS box is founded and enter login code to start.
English Manual 3.2 Login 1) After “Login Code” dialog box shown, enter login code to start presentation. 2) You can see the login code shown on the projector screen. 3.
English Manual 3.4 Screen Projection Click the “Play” button for full or split screen, you can project the main screen on to the display immediately, click the “Pause” button, you can freeze you projection screen, and click the “Stop” button to stop projecting your screen. Button Description Full Screen projection Project to Split #1 Project to Split #2 Project to Split #3 Project to Split #4 Stop projecting Pause projecting 3.5 Magnifier Feature Click to enable the magnifier feature.
English Manual Ps2. You need to draw and resize the video size to fit into this rectangle. 3.6 Video/Music streaming Feature Click the “Video Tab” to switch to Video Mode, choose a video/audio file, then it will stream the original file to playback on the screen. * Supported Video/Audio Format: MPEG1/2, DivX(3.4.
English Manual Button Description Start Playing Video/Music Stop Playing Video/Music Open Video/Music File Mute Volume Level Progress Bar 3.7 Menu Description Menu Login Code Exit Minimize 3.7.1 Show Login Code Click “Show Login Code”, it will display the login code on the right-upper of desktop and close it automatically after 10 seconds. You can also click on the area to close this window manually.
English Manual 3.7.2 Open Admin Web Page Click to open function menu and select “Web Admin” management web page. The web page detailed functions will be described on next chapter.
English Manual 3.7.3 Searching Server Click “Search Server” to re-search the WPS again. 3.7.4 Magnifier Option Click “Magnifier option” to change the aspect ratio of captured video region with magnifier feature.
English Manual 3.7.5 Projection Quality Click the “Projection Quality”, choose “Normal” for faster projection speed with lower screen image quality, and “Best” for clear screen image quality but slower projection speed. 3.7.6 Projection Source Click the “Projection Source”, you can select to project the main screen of desktop or the virtual extended screen. PS. This function is only supported on Windows XP and need to install another virtual display driver first.
English Manual 3.7.7 Connection Profile Click “Profile Manager”, you can click “save current as” to save current connection configuration into Profile, or click the “Profile Manager” to add, delete or modify current profiles.
English Manual Save Current as Click the “Save current as”, it will save your current connection into profile for future quick connect. Manage Profile Click the “Manage Profile”, you can see current profile, add or delete the profile, and edit the existing profile.
English Manual 3.7.8 Auto WiFi connect Click”Auto WiFi Connect” to enable the AWZC function, this function can save the WiFi connection steps. 3.7.9 Auto Power Manager To make the highest projection performance, application will turn the PC’s windows power scheme from current settings to “highest performance”, however, you can click the “Auto Power Manager” to enable or disable this function and restore you power scheme immediately.
English Manual 3.7.10 Hide UI Click the “Hide UI”, you can choose to hide or display the application control panel from projection screen. 3.7.11 Advanced Screen Capture Click the “Advanced Screen Capture”, you will be able to see tip windows and other layered windows (include the main UI) on the connected display.
English Manual However, the mouse cursor may blink from time to time when you are projecting your PC screen! 3.7.12 Repeat Click the” Repeat”, you can choose to playback current video/audio file repeat or not.
English Manual 3.7.13 Make PnS Token Click “Make PnS Token” to make a USB WPS Token, you can insert a USB thumb drive and follows the wizard to make the Token.
English Manual 3.7.14 Copy Application to desktop Click the “Copy Application to desktop”; it will copy the application to your desktop immediately even you don’t have the system privilege 3.7.15 About Click “About” to show system information. It includes Client version, IP address and other information.
English Manual 3.7.16 Exit Click “Exit” to exit this application. It will stop current playing status and close the application immediate.
English Manual 4. WPS for PDA To project your PDA screen with WPS, please follow the steps: 1) Enable your WiFi and connect to WPS. 2) Open the browser on your PDA and enter the IP address to download WPS Client software for PDA version. ♦ The default IP address is 192.168.100.10. ♦ Or, refer to the IP address which shown on the projector screen. 3) Install WPS client software. 4) Launch WPS software and enter the login code. 5) Start Projection. .
English Manual 5. Mac Client Utility 5.1 Launch Application 1) 2) Enable your WiFi and connect to WPS device. Execute WPS client software for Mac. 3) Launch WPS software and enter the login code. 4) Start Projection.
English Manual 5.2 Main User Interface Menu Area Screen Projection Tab Streaming Tab Status Indicator Control Area for Screen Projection Feature Control Area for Streaming Feature 5.
English Manual screen, and click the “Stop” button to stop projecting your screen. Button Description Full Screen projection Project to Split #1 Project to Split #2 Project to Split #3 Project to Split #4 Stop projecting Pause projecting Magnifier 5.4 Video/Music streaming Feature Click the “Video Tab” to switch to Video Mode, choose a video/audio file, then it will stream the original file to playback on the screen.
English Manual * Supported Video/Audio Format: MPEG1/2, DivX(3.4.5), XviD(MPEG4), WMV9, MP3, WMA Button Description Start Playing Video/Music Stop Playing Video/Music Open Video/Music File Mute Volume Level Progress Bar 6. Web Management 6.1 Home Page 1. Make sure your PC connect to WPS box successfully. 2. Open your browser, it will enter WPS home page automatically. 3. If not, enter your IP address on the browser, you can see the IP on the projector screen.
English Manual 4. The default IP is 192.168.100.10 6.2 Download Software 1. Select “Download software” function. 2. Please select the “Windows Vista / XP / 2000” or ”Windows Mobile 5.0” and execute the installation program. 3. Follow Installation Wizard instructions to proceed till the installation process complete. 4. If pop up “Windows Security Alert” because Windows firewall block this program. You just press “Unblock” button to continue installation. 5.
English Manual 6.3 Conference Control 1) This function allows you to host a meeting smoothly without projector cable swapping and each participant can show their presentation easily. 2) Select “Conference Control” function. 3) Enter password, the default value is “trainer”, and then press [Login].
English Manual 4) After login, you can see a User List on the screen which indicates all of users connected to WPS box. 5) There are three columns, “Computer Name”, “Play Control” and “IP Address”. 6) Play Control，There are six buttons, including Play(Full) Play Split #2 ,Play Split #3 , Play Split #4 and Stop 7) User List 6.4 Login Web Admin 1. Click [Admin] and then enter password to login web page. 2. The password default value is “admin”. 32 , Play Split #1 .
English Manual 6.4.1 System Status Click [System Status], shows current system status. Model Name: Product model name Versions: 1. Firmware version no.: Product firmware version number. Network Status: 1. IP address： ：IP address of WPS device. 2. Subnet Mask： ：subnet mask 3. Default Gateway： ：default gateway 4. Wireless MAC address： ：wireless MAC address 5. Wire MAC address： ：wire MAC address Connection Status: 1. Projecting status: which is “Waiting for projecting” or “Projecting” 2.
English Manual < Auto-Configuration Network Setup> The default setting of the WPS box is DHCP client. When the WPS box is connected to a LAN that already has a DHCP server present, the WPS box takes an IP address assigned to it by the server. When the WPS box is connected to a LAN that does not have a DHCP server, the WPS box becomes the DHCP server in the network.
English Manual ♦ ♦ ♦ ♦ End IP: The end IP address of DHCP Server Subnet Mask: The default value is 255.255.255.0 Default Gateway: The default value is 192.168.100.10 DNS Server: The default value is 192.168.100.10 < Wireless Setup> ♦ Wireless LAN: The default value is “Enable” ♦ Region: default value is “Worldwide”. ♦ SSID: SSID string, max. Length is 32 bytes. ♦ ♦ ♦ SSID Broadcast: The default value is “Enable” Channel: to set fixed channel or Auto.
English Manual 6.4.3 Projection Setup Click [Projection Setup] button ♦ ♦ ♦ : 1024x768, 1280x768 and 800x600. : provide WPS output with 16bit or 32 bit color depth. It depends on your PC settings. : This is VGA output refresh rate, provides 60 ♦ Hz and 75Hz to suit for different kinds of projectors. : You can select “Disable”, “Random”, or “Use the following code” to set a specified 4-characters Number.
English Manual 6.4.4 Change Passwords Click [Change Password] button, to change password value. ♦ : enter new password you want to change for each category. : double confirm new password. ♦ : Confirmation and Save modifications. ♦ 6.4.5 Reset to Default Click [Reset to Default] button to restore factory default settings. : Confirmation and action.
English Manual *** Another way to restore Factory Default Settings, Follow below procedures. 1. Press [Reset] button and Hold. 2. Turn on WPS box. 3. Wait for over 10 seconds and relief [Reset] button. 4. It will take effect to restore factory default settings. 6.4.6 Firmware Upgrade Click [Firmware Upgrade] button to upgrade firmware. 1. Firstly, you have to get latest firmware image file from your vendor. 2. Click to specify file name you want to upgrade. 3. Click to start. 4.
English Manual Warning: Don’t power off WPS while firmware upgrade in progress, otherwise will cause your Box doesn’t work and have to return device to your vendor for fixing. 6.4.7 Reboot System Click [Reboot System] button, to restart system ♦ : reboot system automatically.
English Manual 6.4.
Radio Frequency Energy, Certifications Shielded cables must be used with this equipment to maintain compliance with radio frequency energy emission regulations and ensure a suitably high level of immunity to electromagnetic disturbances. FCC Warning This equipment has been tested and found to comply with the limits for a Class B Digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Radio Frequency Energy, Certifications electrical and electronic equipment. The wheelie bin symbol shown indicates that this product must not be disposed of with household waste. Instead the product must be recycled in a manner that is environmentally friendly. For more information on how to dispose of this product, please contact your local recycling centre or your household waste disposal service.
