Ethernet Powerline Adaptor Quick Setup Guide
Copyright The contents of this publication may not be reproduced in any part or as a whole, stored, transcribed in an information retrieval system, translated into any language, or transmitted in any form or by any means, mechanical, magnetic, electronic, optical, photocopying, manual, or otherwise, without the prior written permission. Trademarks All product, company, brand names are trademarks or registered trademarks of their respective companies. They are used for identification purpose only.
FCC Radiation Norm This equipment has been tested and found to comply with limits for a Class B digital device pursuant to 47 CFR, Part 2 and Part 15 of the Federal Communication Commission (FCC) rules. Operation is subject to the following Two conditions: 1. This device may not cause harmful interference 2. This device must accept any interference received including interferences that may cause undesired operations.
Congratulations on your purchase of this outstanding Ethernet Powerline Adaptor. This device is a 85Mbps Powerline Ethernet Adaptor which transforms your house’s existing electrical wiring into an ubiquitous networking infrastructure. Simply plug this 85Mbps Ethernet Powerline Adaptor into an ordinary AC power outlet which will easily extend your Cable/xDSL broadband connection or existing Ethernet (LAN) network to any other electrical outlet in any room of a house without the need of any new cabling.
3. Hardware Connection – Computer Following are the steps to properly connect the Ethernet Powerline Adaptor to your computer: 1. Power off your PC or Notebook. 2. Connect the provided Ethernet (RJ-45) cable to the Ethernet Powerline Adaptor’s Ethernet port. 3. Connect the other end of the Ethernet (RJ-45) cable to you computer’s LAN port. 4. Plug the Ethernet Powerline Adaptor into a wall socket next to the computer. 5. Turn on your computer. 6.
4. Hardware Connection – Internet Follow the procedures describe below to connect the Ethernet Powerline Adaptor to your ADSL broadband connection: 1. Power off your PC or Notebook. 2. Connect the provided Ethernet (RJ-45) cable to the Ethernet Powerline Adaptor’s Ethernet port. 3. Connect the other end of the Ethernet (RJ-45) cable to an available Ethernet port of your ADSL broadband Router. 4. Plug the Ethernet Powerline Adaptor into a wall socket next to the computer. 5. Turn on your computer.
5. Management Utility Install Follow the following procedures to properly installing the provided Management Utility: Step 1: Power on your computer and insert the provided CD into the CD-ROM drive, the following screen will pop-up automatically. Click on “Management Utility” to install the Management Utility. Step 2: The program installation process will carry out and automatically copying all the necessary files to your system.
Step 3: The following screen will pop-up when the Power Adaptor Utility is successfully installed. Step 4: After the installation, a shortcut to the “Power Adaptor Utility” application icon is provided on the windows desktop.
