6-Port 10/100Mbps Fast Ethernet Switch 16-Port 10/100Mbps Fast Ethernet Switch with 1 Fiber port USER'S GUIDE LINDY Part No.
TABLE OF CONTENTS 1 UNPACKING INFORMATION ................................................. 3 2 PRODUCT INTRODUCTION .................................................. 4 2.1 Models ..................................................................................... 4 2.2 KEY FEATURES ...................................................................... 4 2.3 The Front Panel ....................................................................... 4 2.3.1 Port Speeds ...............................
1 UNPACKING INFORMATION Thank you for purchasing this Switch. Before continuing, please check the contents of the product package. This product package should contain the following items: One (1) 16-Port Switch One (1) Power Cord Four (4) Rubber Feet (for desktop placement) One (1) Rackmount Kit (optional) This User’s Guide If anything is missing, please contact your place of purchase.
2 PRODUCT INTRODUCTION 2.1 Models This Switch is a multi-speed, versatile network device combining both Copper and Fiber ports under the same hood. The number and types of ports for this Switch are listed below. Model 100BASE-TX / 10BASE-T port 100BASE-FX port 16-Port switch Sixteen (16) N/A 2.2 ƍIndependent bandwidth for each port. ƍ10/100Mbps TP ports with Auto-Negotiation supported. ƍBridging capability for 100Mbps and 10Mbps segments. ƍProvides Store-and-Forward forwarding scheme.
2.3.3 Status LEDs This Switch comes with a complete range of LEDs. The table below lists each LED’s name, color and a brief description of its function. One (1) for power On/Off. One (1) per port for Link/Activity. One (1) per port for Full-Duplex/Collision. Four (4) for TRUNK Groups status. Two (2) for Home VLAN status. ƍ ƍ ƍ ƍ ƍ Name Pwr LINK/ACT FD/COL TRUNK A B C D Home VLAN A B Color Function Green Lit: Power "On" Green Lit: When the port has a valid physical connection (Link) with another device.
2.4.2 DIP-Switch This Switch provides DIP-Switches setting to configuration, the configuration setting as below: a. Home VLAN We have provided two DIP-Switches for the Home VLAN setting. SW up SW down Left side DIP-Switch Home VLAN Disable Home VLAN Enable Right side DIP-Switch Home VLAN TYPE A Home VLAN TYPE B Ƒ Ƒ Ƒ Home VLAN TYPE A: Select 14 VLANs (port#1 #7, #9 #15) with two overlapping ports (port#8, #16) topology.
3 INSTALLATION This 16-Port Switch is "Plug-&-Play". They do not require software configuration. Users can immediately use any of the features of this product simply by attaching the cables and turning on the power. 3.1 ƍAttach the Four (4) rubber feet included in the product package to the bottom of the Switch, one in each corner. ƍPlace the Switch on a clean, flat desk or table top close to a power outlet. ƍPlug in all network connections and the power cord. LOCATE THE SWITCH 3.
4 HELPFUL SUGGESTIONS 4.1 Prior to Installation Before installing this Switch and connecting it to network devices, it is important to plan the network's layout. Things you should consider include: Dedicated Bandwidth: File servers and other high-traffic hardware improve their performance if they have their own dedicated 10Mbps or 100Mbps bandwidth. Full-Duplex: Determine which devices support Full-Duplex connections. Fast Ethernet: Make sure rules for cable lengths and categories are followed.
5 Sample Application The optimal application for this Switch is to interconnect file servers with other bandwidth-hungry workgroups, departments, and offices all with dedicated bandwidths.
6 PRODUCT SPECIFICATIONS Models Standards 16-Port Switch Other model not available ! IEEE 802.3u: 100BASE-TX IEEE 802.
