Switch User Manual

6 SMART FUNCTION CONFIGURATION

6.1 HyperTerminal

The Switch has a smart function that you can use to manage your local area network (LAN) more effectively. You can also use

the default setting to operate the Switch as a dumb switch.

If you want to use smart function, install the Switch as below:

Use the “RS-232” connector to connect the Switch to a computer. Connect One (1) cable end to the Switch, and connect the

other end to the computer’s “COM1” or “COM2” port.

Note: If your Windows program doesn’t have a hyper terminal, you have to install it first.

Power“ON”theSwitch

Execute the “HyperTerminal” program:

Start Menu ! Application Program ! Communication ! Hyper Terminal

Setup the connection content of Hyper Terminal:

In connection tag, select which “COM” port is used to connect PC and the Switch.

Then press the “SETUP” button, set “Bits per second” to 38400, “Data bits” to 8,“Parity”toNone,“Stopbits”to1,“Flow

control” to None.