Console Switch 2 to 1 User Manual English LINDY Art.No. 39122 www.LINDY.
Introduction The LINDY Console Switch 2 to 1 allows you to share 1 PC between two user consoles (Keyboard, Video & Mouse). The Switch supports easy hotkey control and features adjustable Auto-scan operation.
Installation User 2 To PC User 1 User 2 PSU User 1 User 1 LED Power LED User 2 LED User 1/User 2 LED: Shows which user is currently selected Power LED: The power LED will be lit when the PC is powered on Powering On: Always power on the monitor before the PC
Operation 1. Switch Between 2 users: Press twice (within 3 seconds) to switch between users CTRL 2. CTRL Set-up Buzzer On/Off: Press right twice (within 3 seconds) to switch the buzzer On/Off Right 3. SHIFT Right SHIFT Hot-key Control: Press twice (within 3 seconds) to enter hot-key mode SCROLL LOCK SCROLL LOCK Under Hot-Key control, the LED on the user’s keyboard will flash according to the timeout setting A.
B. Disabling the other users display – If you do not want the other user to see your display you can disable their monitor. Under hotkey control press to turn off the other users monitor display. Repeat the process or return to manual control and switch users to re-enable both displays SCROLL LOCK SCROLL LOCK L C. Releasing console control – Under hotkey control, to release the right of usage press SCROLL LOCK SCROLL LOCK SPACE D.
Radio Frequency Energy Shielded cables must be used with this equipment to maintain compliance with radio frequency energy emission regulations and ensure a suitably high level of immunity to electromagnetic disturbances. FCC Warning This equipment has been tested and found to comply with the limits for a Class B Digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
