lincolncanada.com Second Printing Owner’s Manual Lincoln MKC Litho in U.S.A. O w n e r ’s M a n u a l January 2018 201 8 MKC JJ7J 19A321 AB owner.lincoln.
The information contained in this publication was correct at the time of going to print. In the interest of continuous development, we reserve the right to change specifications, design or equipment at any time without notice or obligation. No part of this publication may be reproduced, transmitted, stored in a retrieval system or translated into any language in any form by any means without our written permission. Errors and omissions excepted. © Ford Motor Company 2018 All rights reserved.
Table of Contents Introduction About This Manual ...........................................7 Symbols Glossary .............................................7 Data Recording ...............................................10 California Proposition 65 ..............................12 Perchlorate .......................................................12 Lincoln Automotive Financial Services ..........................................................................12 Replacement Parts Recommendation ............
Table of Contents Keyless Entry ..................................................69 Liftgate Autowipers ......................................................84 Windshield Washers .....................................85 Rear Window Wiper and Washers ............85 Instrument Cluster Power Liftgate .................................................72 Lighting Security Passive Anti-Theft System ...........................76 Anti-Theft Alarm .............................................
Table of Contents Power Seats ....................................................141 Memory Function .........................................143 Rear Seats ......................................................145 Heated Seats .................................................146 Climate Controlled Seats ...........................147 Rear Seat Armrest ........................................148 Universal Garage Door Opener Universal Garage Door Opener ...............
Table of Contents Using Cruise Control ..................................209 Using Adaptive Cruise Control .................210 Towing the Vehicle on Four Wheels ......248 Driving Hints Driving Aids Driver Alert .....................................................217 Lane Keeping System .................................219 Blind Spot Information System ................224 Cross Traffic Alert ........................................226 Steering .........................................................
Table of Contents Changing the 12V Battery .........................296 Checking the Wiper Blades ......................297 Changing the Wiper Blades .....................298 Adjusting the Headlamps .........................299 Removing a Headlamp ..............................300 Changing a Bulb ..........................................300 Bulb Specification Chart .............................301 Changing the Engine Air Filter ................303 Vehicle Care General Information .........................
Table of Contents Accessories Accessories ...................................................476 Lincoln Protect Lincoln Protect .............................................478 Scheduled Maintenance General Maintenance Information ...........481 Normal Scheduled Maintenance ............485 Special Operating Conditions Scheduled Maintenance ............................................489 Scheduled Maintenance Record .............493 Appendices Electromagnetic Compatibility ..................
Introduction ABOUT THIS MANUAL Thank you for choosing Lincoln. We recommend that you take some time to get to know your vehicle by reading this manual. The more that you know about it, the greater the safety and pleasure you will get from driving it. WARNING Driving while distracted can result in loss of vehicle control, crash and injury. We strongly recommend that you use extreme caution when using any device that may take your focus off the road.
Introduction Anti-lock braking system Child seat lower anchor Fan warning Avoid smoking, flames or sparks Child seat tether anchor Fasten seatbelt Battery Cruise control E71880 Flammable E231160 E71340 Battery acid Front airbag Do not open when hot E67017 Brake fluid - non petroleum based Engine air filter Brake system Engine coolant Engine coolant temperature Front fog lamps Fuel pump reset Fuse compartment E270480 Hazard flashers Cabin air filter Engine oil Check fuel cap Explosive
Introduction Interior luggage compartment release Parking aid Service engine soon Parking brake Passenger airbag activated E139213 Jack E270849 Passenger airbag deactivated Power steering fluid Keep out of reach of children E270850 E161353 Lighting control Power windows front/rear Side airbag Low tire pressure warning Power window lockout Shield the eyes Maintain correct fluid level Requires registered technician E167012 E231159 Stability control E138639 Windshield wiping system Saf
Introduction DATA RECORDING Service Data Recording Service data recorders in your vehicle are capable of collecting and storing diagnostic information about your vehicle. This potentially includes information about the performance or status of various systems and modules in the vehicle, such as engine, throttle, steering or brake systems.
Introduction • • • How far (if at all) the driver was depressing the accelerator and/or the brake pedal; and How fast the vehicle was traveling; and Where the driver was positioning the steering wheel. This data can help provide a better understanding of the circumstances in which crashes and injuries occur.
Introduction Additionally, when you connect to Traffic, Directions and Information (if equipped, U.S. only), the service uses GPS technology and advanced vehicle sensors to collect the vehicle’s current location, travel direction, and speed (“vehicle travel information”), only to help provide you with the directions, traffic reports, or business searches that you request. If you do not want Ford or its vendors to receive this information, do not activate the service.
Introduction P.O. Box 542000 Collision Repairs Omaha, NE 68154-8000 We hope that you never experience a collision, but accidents do happen. Genuine Ford replacement collision parts meet our stringent requirements for fit, finish, structural integrity, corrosion protection and dent resistance. During vehicle development we validate that these parts deliver the intended level of protection as a whole system.
Introduction On Board Diagnostics Data Link Connector WARNING Do not connect wireless plug-in devices to the data link connector. Unauthorized third parties could gain access to vehicle data and impair the performance of safety related systems. Only allow repair facilities that follow our service and repair instructions to connect their equipment to the data link connector.
Introduction Using mobile communications equipment is becoming increasingly important in the conduct of business and personal affairs. However, you must not compromise your own or others’ safety when using such equipment. Mobile communications can enhance personal safety and security when appropriately used, particularly in emergency situations. Safety must be paramount when using mobile communications equipment to avoid negating these benefits.
Environment PROTECTING THE ENVIRONMENT You should play your part in protecting the environment. Correct vehicle usage and the authorized disposal of waste, cleaning and lubrication materials are significant steps toward this aim. For details about Ford Motor Company's sustainability progress and initiatives visit: Web Address www.sustainability.ford.
At a Glance INSTRUMENT PANEL OVERVIEW E191074 17 MKC (TME) Canada/United States of America, JJ7J 19A321 AA enUSA, Edition date: 201707, Second Printing
At a Glance A Direction indicators. See Direction Indicators (page 92). High beam. See Lighting Control (page 87). B Instrument cluster. See Gauges (page 103). See Warning Lamps and Indicators (page 104). K Entertainment, navigation and phone. L Voice control. See Voice Control (page 81). M Horn. N Steering wheel adjustment. See Adjusting the Steering Wheel (page 79). C Wiper lever. See Wipers and Washers (page 83). D Information and entertainment display. See SYNC™ 3 (page 368).
Child Safety GENERAL INFORMATION See the following sections for directions on how to properly use safety restraints for children. WARNINGS Always make sure your child is secured properly in a device that is appropriate for their height, age and weight. Child safety restraints must be bought separately from your vehicle. Failure to follow these instructions and guidelines may result in an increased risk of serious injury or death to your child. WARNINGS All children are shaped differently.
Child Safety Recommendations for Safety Restraints for Children Child Child size, height, weight, or age Recommended restraint type Infants or toddlers Children weighing 40 lb (18 kg) or less (generally age four or younger). Use a child safety seat (sometimes called an infant carrier, convertible seat, or toddler seat). Small children Children who have outgrown or no longer properly fit in a child safety seat (generally children who are less than 4 ft. 9 in. (1.
Child Safety • • • You are required by law to properly use safety seats for infants and toddlers in the United States and Canada. Many states and provinces require that small children use approved booster seats until they reach age eight, a height of 4 feet 9 inches (1.45 meters) tall, or 80 lb (36 kg). Check your local and state or provincial laws for specific requirements about the safety of children in your vehicle.
Child Safety When installing a child safety seat with combination lap and shoulder belts: • Use the correct safety belt buckle for that seating position. • Insert the belt tongue into the proper buckle until you hear a snap and feel it latch. Make sure the tongue is securely fastened in the buckle. • Keep the buckle release button pointing up and away from the safety seat, with the tongue between the child seat and the release button, to prevent accidental unbuckling.
Child Safety 7. Try to pull the belt out of the retractor to make sure the retractor is in the automatic locking mode (you should not be able to pull more belt out). If the retractor is not locked, unbuckle the belt and repeat Steps 5 and 6. E142531 E142875 4. Insert the belt tongue into the proper buckle (the buckle closest to the direction the tongue is coming from) for that seating position until you hear a snap and feel the latch engage. Make sure the tongue is latched securely by pulling on it. 5.
Child Safety the child is added to the child restraint. It also helps to achieve the proper snugness of the child seat to your vehicle. Sometimes, a slight lean toward the buckle will additionally help to remove remaining slack from the belt. 9. Attach the tether strap (if the child seat is equipped). 10. Before placing the child in the seat, forcibly move the seat forward and back to make sure the seat is securely held in place.
Child Safety attach the child seat, however the safety belt can still be used to attach the child seat. For forward-facing child seats, the top tether strap must also be attached to the proper top tether anchor, if a top tether strap has been provided with your child seat. Attach LATCH lower attachments of the child seat only to the anchors.
Child Safety Using Tether Straps 1. Route the child safety seat tether strap over the back of the seat. For outboard seating positions, route the tether strap under the head restraint and between the head restraint posts. For the center seating positions, route the tether strap over the top of the head restraint. If needed, the head restraints can also be removed.
Child Safety BOOSTER SEATS WARNING E142539 3. Clip the tether strap to the anchor as shown. 4. Tighten the child safety seat tether strap according to the manufacturer's instructions. If your child restraint system is equipped with a tether strap, and the child restraint manufacturer recommends its use, we also recommend its use. Do not put the shoulder section of the seatbelt or allow the child to put the shoulder section of the seatbelt under their arm or behind their back.
Child Safety Types of Booster Seats If your backless booster seat has a removable shield, remove the shield. If a vehicle seating position has a low seat backrest or no head restraint, a backless booster seat may place your child's head (as measured at the tops of the ears) above the top of the seat. In this case, move the backless booster to another seating position with a higher seat backrest or head restraint and lap and shoulder belts, or consider using a high back booster seat.
Child Safety E142596 E142597 29 MKC (TME) Canada/United States of America, JJ7J 19A321 AA enUSA, Edition date: 201707, Second Printing
Child Safety If the booster seat slides on the vehicle seat upon which it is being used, placing a rubberized mesh sold as shelf or carpet liner under the booster seat may improve this condition. Do not introduce any item thicker than this under the booster seat. Check with the booster seat manufacturer's instructions. CHILD RESTRAINT POSITIONING WARNINGS Airbags can kill or injure a child in a child seat. Never place a rear-facing child seat in front of an active airbag.
Child Safety Recommendations for attaching child safety restraints for children Use any attachment method as indicated below by X Restraint Type Combined weight of child and child seat Rear facing child seat Up to 65 lb (29.5 kg) Rear facing child seat Over 65 lb (29.5 kg) Forward facing child seat Up to 65 lb (29.5 kg) Forward facing child seat Over 65 lb (29.
Child Safety Right-Hand Side Turn clockwise to lock and counterclockwise to unlock. E112197 The childproof locks are located on the rear edge of each rear door and must be set separately for each door. Left-Hand Side Turn counterclockwise to lock and clockwise to unlock.
Seatbelts PRINCIPLE OF OPERATION WARNINGS Always drive and ride with your seatback upright and the lap belt snug and low across the hips. To reduce the risk of injury, make sure children sit where they can be properly restrained. Never let a passenger hold a child on his or her lap while your vehicle is moving. The passenger cannot protect the child from injury in a crash.
Seatbelts • • retractor and anchor pretensioner at the front outboard seating positions belt tension sensor at the front outboard passenger seating position FASTENING THE SEATBELTS The front outboard and rear safety restraints in the vehicle are combination lap and shoulder belts. E71880 • safety belt warning light and chime E67017 • E142588 crash sensors and monitoring system with readiness indicator.
Seatbelts Using a Sliding Clip (If Equipped) Using Seatbelts During Pregnancy WARNING Always ride and drive with your seatback upright and properly fasten your seatbelt. Fit the lap portion of the seatbelt snugly and low across the hips. Position the shoulder portion of the seatbelt across your chest. Pregnant women must follow this practice. See the following figure. Pregnant women should always wear their seatbelt.
Seatbelts Vehicle Sensitive Mode Automatic Locking Mode This is the normal retractor mode, which allows free shoulder belt length adjustment to your movements and locking in response to vehicle movement. For example, if the driver brakes suddenly or turns a corner sharply, or the vehicle receives an impact of about 5 mph (8 km/h) or more, the combination seatbelts lock to help reduce forward movement of the driver and passengers. In this mode, the shoulder belt automatically pre-locks.
Seatbelts How to Disengage the Automatic Locking Mode Unbuckle the combination lap and shoulder belt and allow it to retract completely to disengage the automatic locking mode and turn on the vehicle sensitive (emergency) locking mode. How to Extract Seatbelts in the Rear Outermost Positions Seatbelts in the rear outermost positions can lock if you firmly return the seat backrest to its upright position. You can unlock the seatbelts using the following procedures.
Seatbelts Conditions of operation If Then The driver seatbelt is not buckled before the ignition switch is turned The seatbelt warning light illuminates and the warning chime sounds to the on position... for a few seconds. The driver seatbelt is buckled while the indicator light is illuminated and the warning chime is sounding... The seatbelt warning light and warning chime turn off. The driver seatbelt is buckled before the ignition switch is turned to the on position...
Seatbelts If... Then... You and the front seat passenger buckle your safety belts before you switch the ignition on or less than 1-2 minutes elapse after you switch the ignition on... The Belt-Minder feature will not activate. You or the front seat passenger do not buckle your safety belts before The Belt-Minder feature activates, the safety belt warning light illuminyour vehicle reaches at least 6 mph (9.
Seatbelts Deactivating and Activating the Belt-Minder Feature WARNING While the system allows you to deactivate it, this system is designed to improve your chances of being safely belted and surviving an accident. We recommend you leave the system activated for yourself and others who may use the vehicle. Note: The driver and front passenger warnings switch on and off independently. When you perform this procedure for one seating position, do not buckle the other position as this will terminate the process.
Seatbelts We recommend that all seatbelt assemblies in use in vehicles involved in a crash be replaced. However, if the crash was minor and an authorized dealer finds that the belts do not show damage and continue to operate properly, they do not need to be replaced. Seatbelt assemblies not in use during a crash should also be inspected and replaced if either damage or improper operation is noted. WARNINGS Only use extensions provided free of charge by Lincoln Motor Company dealers.
Personal Safety System™ The Personal Safety System provides an improved overall level of frontal crash protection to front seat occupants and is designed to help further reduce the risk of airbag-related injuries. The system is able to analyze different occupant conditions and crash severity before activating the appropriate safety devices to help better protect a range of occupants in a variety of frontal crash situations.
Supplementary Restraints System PRINCIPLE OF OPERATION WARNINGS Airbags do not inflate slowly or gently, and the risk of injury from a deploying airbag is the greatest close to the trim covering the airbag module. All occupants of your vehicle, including the driver, should always properly wear their seatbelts, even when an airbag supplemental restraint system is provided. Failure to properly wear your seatbelt could seriously increase the risk of injury or death.
Supplementary Restraints System The airbags inflate and deflate rapidly upon activation. After airbag deployment, it is normal to notice a smoke-like, powdery residue or smell the burnt propellant. This may consist of cornstarch, talcum powder (to lubricate the bag) or sodium compounds (for example, baking soda) that result from the combustion process that inflates the airbag. Small amounts of sodium hydroxide may be present which may irritate the skin and eyes, but none of the residue is toxic.
Supplementary Restraints System Proper Driver and Front Passenger Seating Adjustment WARNING National Highway Traffic Safety Administration (NHTSA) recommends a minimum distance of at least 10 in (25 cm) between an occupant's chest and the driver airbag module. To properly position yourself away from the airbag: • Move your seat to the rear as far as you can while still reaching the pedals comfortably. • Recline the seat slightly (one or two degrees) from the upright position.
Supplementary Restraints System FRONT PASSENGER SENSING SYSTEM WARNINGS Even with advanced restraints systems, properly restrain children 12 and under in a rear seating position. Failure to follow this could seriously increase the risk of injury or death. Sitting improperly, out of position or with the seatback reclined too far can take weight off the seat cushion and affect the decision of the passenger sensing system, resulting in serious injury or death in the event of a crash.
Supplementary Restraints System • • Restart the vehicle and have the person remain in this position for about two minutes. This allows the system to detect that person and enable the passenger frontal airbag. If the indicator OFF lamp remains lit even after this, advise the person to ride in the rear seat. When the front passenger sensing system enables the front passenger frontal airbag (may inflate), the passenger airbag status indicator illuminates the ON lamp and remains illuminated.
Supplementary Restraints System Note: When the passenger airbag status indicator OFF light illuminates, the passenger (seat mounted) side airbag may be disabled to avoid the risk of airbag deployment injuries. After all occupants have adjusted their seats and put on seatbelts, it is very important that they continue to sit properly. A properly seated occupant sits upright, leaning against the seat backrest, and centered on the seat cushion, with their feet comfortably extended on the floor.
Supplementary Restraints System If it is necessary to modify an advanced front airbag system to accommodate a person with disabilities, contact the Ford Customer Relationship Center. See Getting the Services You Need (page 260). WARNINGS Do not attempt to service, repair, or modify the airbag, its fuses or the seat cover on a seat containing an airbag as you could be seriously injured or killed. Contact your authorized dealer as soon as possible.
Supplementary Restraints System Note: The passenger sensing system will deactivate the passenger seat-mounted side airbag if it detects an empty passenger seat. The design and development of the side airbag system included recommended testing procedures that were developed by a group of automotive safety experts known as the Side Airbag Technical Working Group. These recommended testing procedures help reduce the risk of injuries related to the deployment of side airbags.
Supplementary Restraints System Safety Canopy will be activated, regardless of which seats are occupied. The Safety Canopy is designed to inflate between the side window area and occupants to further enhance protection provided in side impact crashes and rollover events. E75004 The system consists of the following: • Safety Canopy curtain airbags above the trim panels over the front and rear side windows identified by a label or wording on the headliner or roof-pillar trim.
Supplementary Restraints System The restraints control module also monitors the readiness of the above safety devices plus the crash and occupant sensors. A warning indicator light in the instrument cluster indicates the readiness of the safety system. If this warning indicator light is not functioning and there is another fault within the system, the message cluster could display an airbag failure warning. A tone sounds, a warning indicator light illuminates, or both, until the problem is repaired.
Supplementary Restraints System • • The knee airbag(s) could deploy based on crash severity and occupant conditions. The design of the Safety Canopy is to inflate in certain side impact crashes and when a certain likelihood of rollover is detected by the rollover sensor. The Safety Canopy could activate in other types of crashes if the vehicle experiences sufficient sideways motion or deformation, or a certain likelihood of rollover. AIRBAG DISPOSAL Contact your authorized dealer as soon as possible.
Keys and Remote Controls GENERAL INFORMATION ON RADIO FREQUENCIES This device complies with Part 15 of the FCC Rules and with Licence exempt RSS Standards of Industry Canada. Operation is subject to the following two conditions: • This device may not cause harmful interference, and • This device must accept any interference received, including interference that may cause undesired operation.
Keys and Remote Controls REMOTE CONTROL Intelligent Access Key The intelligent access keys operate the power locks and the remote start system. The key must be in your vehicle to use the push button start. Note: You may not be able to shift out of park (P) unless the intelligent access key is inside your vehicle. E151795 Note: Your vehicle keys came with a security label that provides important key cut information. Keep the label in a safe place for future reference.
Keys and Remote Controls Note: Replacing the battery does not erase the programmed key from your vehicle. The transmitter should operate normally. 1. Push the release button and pull the key blade out. 2. Twist a thin coin under the tab hidden behind the key blade head to remove the battery cover. A message appears in the information display when the remote control battery is low. See Information Messages (page 114). The remote control uses one coin-type three-volt lithium battery. E218691 3.
Keys and Remote Controls 5. Reinstall the battery housing cover onto the transmitter and install the key blade. Car Finder Press the button twice within three seconds. A tone sounds and the E138623 direction indicators will flash. We recommend you use this method to locate your vehicle, rather than using the panic alarm. Remote Start WARNING To avoid exhaust fumes, do not use remote start if your vehicle is parked indoors or in areas that are not well ventilated.
Keys and Remote Controls Remote Starting Your Vehicle Note: You must press each button within three seconds of each other. If you do not follow this sequence, your vehicle does not start remotely, the direction indicators do not flash twice and the horn does not sound. E138626 1. Press the lock button to lock all the doors. 2. Press the remote start button twice. The exterior lamps flash twice. A tone sounds if the system fails to start.
MyKey™ PRINCIPLE OF OPERATION MyKey allows you to program keys with restricted driving modes to promote good driving habits. You can program the restrictions to all keys but one. Any keys that you did not program are administrator keys or admin keys. You can use admin keys to: • Create a MyKey with certain vehicle restrictions. • Program certain MyKey settings. • Clear all MyKey restrictions.
MyKey™ Note: Not every feature applies to every vehicle in every market. When they are available for your vehicle, then they appear in your information display, providing choices to switch them on or off, or to select a more specific setting. • • • Various vehicle speed limits so the MyKey driver cannot exceed certain speeds. The information display shows warnings followed by an audible tone when the MyKey driver reaches the set speed.
MyKey™ You can also program the optional MyKey settings. Programming or Changing Configurable Settings Use the information display to program or change your optional MyKey settings. 1. Switch the ignition on using the key or the transmitter you want to program. 2. Access the main menu in the information display and then scroll through the menus to change the settings of your MyKey. See Information Displays (page 109). 3. Follow the instructions in the display. 4.
MyKey™ Number of MyKeys Number of Admin Keys Indicates the number of MyKeys programmed to your vehicle. Use this feature to detect how many MyKeys you have for your vehicle and determine when all MyKeys have been deleted. Indicates how many admin keys are programmed to your vehicle. Use this feature to determine how many admin keys you have for your vehicle, and detect if an additional MyKey has been programmed.
MyKey™ Condition Potential causes · There are no MyKeys programmed to the vehicle. See Creating a MyKey (page 60). For vehicles with keyless start: No MyKey restrictions are available when starting the vehicle. · An admin transmitter is present when you started your vehicle. · There are no MyKeys programmed to the vehicle. See Creating a MyKey (page 60). I cannot clear the MyKeys. · The key or transmitter used to start the vehicle does not have admin privileges. · No MyKeys are created.
Doors and Locks LOCKING AND UNLOCKING Door Lock Indicator Unlocking the Doors (Two-Stage Unlock) You can use the power door lock or the remote control to lock and unlock your vehicle. An LED on each door window trim lights when you lock the door. It remains on for up to five minutes after you switch the ignition off. Press the button to unlock the driver door. Press the button again E138629 within three seconds to unlock all doors. The direction indicators will flash.
Doors and Locks Press the button again within three seconds to confirm that all the doors are closed. The doors lock again, a tone sounds and the direction indicators flash if all the doors and the luggage compartment are closed. Turn the top of the key toward the front of your vehicle once to lock all doors.
Doors and Locks Right-Hand Side Turn counterclockwise to lock. Opening a Rear Door from Inside Pull the interior door handle twice to unlock and open a rear door. The first pull unlocks the door and the second pull will unlatch the door. Note: The system may not function if the passive key is close to metal objects or electronic devices, for example keys or a cell phone. Note: If the system does not function, use the key blade to lock and unlock your vehicle. See Remote Control (page 55).
Doors and Locks When you lock your vehicle with the door open and the ignition off, your vehicle will search for an intelligent access key in the passenger compartment after you close the door. If your vehicle finds a key, all of the doors will immediately unlock. You can override the smart unlock feature and intentionally lock the intelligent access key inside your vehicle. To do this, lock your vehicle after you have closed all the doors by: • Using the keyless entry keypad.
Doors and Locks Illuminated Entry Battery Saver The interior lamps and select exterior lamps will light when you unlock the doors with the remote control. If you leave the courtesy lamps or dome lamps on and switch the ignition off, this feature turns them off after some time. The system turns off the lights if: • You start your vehicle. • You press the remote control lock button. • They are on for 25 seconds.
Doors and Locks The Keyless Entry Keypad only works if the driver door is closed and transmission is in park (P). KEYLESS ENTRY SECURICODE™ KEYLESS ENTRY KEYPAD Programming a Personal Entry Code The keypad is located near the driver window. It is invisible until touched and then it lights up so you can see and touch the appropriate buttons. To create your own personal entry code: 1. Enter the factory-set code. 2. Press 1•2 on the keypad within five seconds. 3. Enter your personal five-digit code.
Doors and Locks Tips: • Do not set a code that uses five of the same number. • Do not use five numbers in sequential order. • The factory-set code works even if you have set your own personal code. Erasing a Personal Code The anti-scan feature turns off after any of the following occur: • One minute of keypad inactivity passes. • You press the unlock button on the remote control. • You switch the ignition on. • You unlock the vehicle using intelligent access. 1. Enter the factory-set five-digit code. 2.
Doors and Locks 3. Press the push button ignition switch once and wait a few seconds. 4. Press the push button ignition switch again and remove the key. 5. Within 10 seconds, place a second programmed intelligent access key in the backup slot and press the push button ignition switch. The factory-set code appears in the information display for a few seconds. Note: The code may not display until after any other warning messages first display.
Liftgate POWER LIFTGATE WARNINGS It is extremely dangerous to ride in a cargo area, inside or outside of a vehicle. In a crash, people riding in these areas are more likely to be seriously injured or killed. Do not allow people to ride in any area of your vehicle that is not equipped with seats and seatbelts. Make sure everyone in your vehicle is in a seat and properly using a seatbelt. Failure to follow this warning could result in serious personal injury or death.
Liftgate Note: Make sure the area behind your vehicle is free from obstruction and that there is enough room for you to operate the liftgate. Objects too close to your vehicle, for example a wall, garage door or another vehicle may come into contact with the moving liftgate. This could damage the liftgate and its components. Note: Be careful when opening or closing the liftgate in a garage or other enclosed area to avoid damaging the liftgate. Outside Control Button Opening the Liftgate 1.
Liftgate Note: Allow the power system to open the liftgate. Manually pushing or pulling the liftgate may activate the system’s obstacle detection feature and stop the power operation or reverse its direction. Manually interfering with the liftgate motion may also replicate a strut failure. Closing the Liftgate WARNING Keep clear of the liftgate when using the rear switch. Stopping the Liftgate Movement Note: Do not apply sudden excessive force to the liftgate while it is in motion.
Liftgate Obstacle Detection Hands-Free Feature (If Equipped) When Closing Make sure you have an intelligent access transmitter within 3 ft (1 m) of the liftgate. The system stops when it detects an obstacle. Three tones sound and the system reverses to open. Once you remove the obstacle, you can power close the liftgate Note: Entering your vehicle while the liftgate is closing can cause your vehicle to bounce and activate obstacle detection.
Security PASSIVE ANTI-THEFT SYSTEM SecuriLock® Note: The system is not compatible with non-Lincoln aftermarket remote start systems. Use of these systems may result in engine starting problems and a loss of security protection. The system helps prevent the engine from starting unless you use a coded key programmed to your vehicle. Using the wrong key may prevent your vehicle from starting. A message may appear in the information display.
Security Make sure that the ignition is switched off before beginning this procedure. Make sure that you close all the doors before beginning and that they remain closed throughout the procedure. Carry out all steps within 30 seconds of starting the sequence. Stop and wait for at least one minute before starting again if you carry out any steps out of sequence. Read and understand the entire procedure before you begin. 1. Open the center console lid. 3. Press the push button ignition switch. 4.
Security • • • Unlock the doors or luggage compartment with the remote control or keyless entry keypad. Switch your vehicle on or start your vehicle. Use a key in the driver door to unlock your vehicle, then switch your vehicle on within 12 seconds. Note: Pressing the panic button on the remote control will stop the horn and signal indicators, but will not disarm the system.
Steering Wheel ADJUSTING THE STEERING WHEEL - VEHICLES WITH: MANUAL ADJUSTABLE STEERING COLUMN 1. Unlock the steering column. 2. Adjust the steering wheel to the desired position. ADJUSTING THE STEERING WHEEL - VEHICLES WITH: POWER ADJUSTABLE STEERING COLUMN (If Equipped) WARNING Do not adjust the steering wheel when your vehicle is moving. WARNING Do not adjust the steering wheel when your vehicle is moving. Note: Make sure that you are sitting in the correct position.
Steering Wheel End of Travel Position The steering column sets a stopping position just short of the end of the column position to prevent damage to the steering column. A new stopping position sets if the steering column encounters an object when tilting or telescoping. To reset the steering column to its normal stopping position: E261582 Use the control on the side of the steering column to adjust the position. To adjust: • Tilt: Press the top or bottom of the control.
Steering Wheel AUDIO CONTROL You can operate the following functions with the control: Seek, Next or Previous VOICE CONTROL Press the seek button to: • Tune the radio to the next or previous stored preset. • Play the next or the previous track. Press and hold the seek button to: • Tune the radio to the next station up or down the frequency band. • Seek through a track. E145980 E145979 A Volume up. B Volume down. C Seek up or next. D Seek down or previous. E Mute. Voice recognition.
Steering Wheel CRUISE CONTROL Type Two HEATED STEERING WHEEL (If Equipped) Type One Switch the heated steering wheel on and off using the touchscreen. Touch the button to switch the heated steering wheel on and off. Note: You can use the heated steering wheel only when the engine is running. E195438 E145976 See Using Adaptive Cruise Control (page 210). See Using Cruise Control (page 209). INFORMATION DISPLAY CONTROL E145981 See Information Displays (page 109).
Wipers and Washers WINDSHIELD WIPERS E270969 Push the lever up or down to operate the windshield wiper. Note: If streaks or smears appear on the windshield, clean the windshield and the wiper blades. If that does not resolve the issue, install new wiper blades. Intermittent Wipe Note: Do not operate the wipers on a dry windshield. This may scratch the glass, damage the wiper blades or cause the wiper motor to burn out. Always use the windshield washers before wiping a dry windshield.
Wipers and Washers Keep the outside of the windshield clean. The rain sensor is very sensitive and the wipers may operate if dirt, mist or insects hit the windshield. AUTOWIPERS (If Equipped) Note: Fully defrost the windshield before you switch the windshield wipers on. In these conditions, you can do the following: • Lower the sensitivity of the autowipers to reduce the amount of smearing on the windshield. • Switch to normal or high-speed wipe. • Switch autowipers off.
Wipers and Washers WINDSHIELD WASHERS Note: Do not operate the washers when the washer reservoir is empty. This could cause the washer pump to overheat. Front Camera Washer (If Equipped) Operating the windshield washer also turns on the front camera washer. E171615 E197528 E270967 Pull the lever toward you to operate the windshield washers. REAR WINDOW WIPER AND WASHERS A Intermittent wipe. B Low speed wipe. Note: Make sure you switch the windshield wipers off before entering a car wash. C Off.
Wipers and Washers Rear Window Washer E167407 Push the lever away from you to operate the rear window washer. When you release the lever, wiping continues for a short period of time.
Lighting Condensation in the Exterior Front Lamps and Rear Lamps Examples of unacceptable condensation are: • A water puddle inside the lamp. • Streaks, drip marks or large droplets present on the interior of the lens. Exterior front lamps and rear lamps have vents to accommodate normal changes in air pressure. If you see any unacceptable condensation, have your vehicle checked by an authorized dealer. GENERAL INFORMATION Condensation can be a natural by-product of this design.
Lighting Headlamp High Beam Flashing the Headlamp High Beam E142451 E162679 E162680 Push the lever away from you to switch the high beam on. Push the lever forward again or pull the lever toward you to switch the high beams off. Slightly pull the lever toward you and release it to flash the headlamps. AUTOLAMPS WARNING The system does not relieve you of your responsibility to drive with due care and attention.
Lighting Windshield Wiper Activated Headlamps Vehicles With Front Fog Lamps When you switch the autolamps on, the headlamps turn on within 10 seconds of switching the wipers on. They turn off approximately 60 seconds after you switch the windshield wipers off. A The headlamps do not turn on with the wipers: • During a single wipe. • When using the windshield washers. • If the wipers are in intermittent mode.
Lighting HEADLAMP EXIT DELAY After you switch the ignition off, you can switch the headlamps on by pulling the direction indicator lever toward you. You will hear a short tone. The headlamps will switch off automatically after three minutes with any door open or 30 seconds after the last door has been closed. You can cancel this feature by pulling the direction indicator toward you again or switching the ignition on.
Lighting The system turns on high beams if it is dark enough and no other traffic is present. If it detects an approaching vehicle’s headlamps or tail lamps, or street lighting ahead, the system turns off high beams before they can distract other road users. Low beams remain on. Note: The system may not operate properly if the sensor is blocked. Keep the windshield free from obstruction or damage. Note: The system may not operate properly in cold or inclement conditions.
Lighting Automatic High Beam Indicator (If Equipped) DIRECTION INDICATORS The indicator lamp illuminates to confirm when the system is ready to assist. WELCOME LIGHTING The Lincoln welcome mat projection lights are on the bottom of the exterior mirror housings. They project an image onto the ground a short distance from your vehicle when welcome lighting or lighted entry turns on.
Lighting INTERIOR LAMPS Type Two Type One The lamps turn on under the following conditions: • You open any door. • You press a remote control button. Front Interior Lamp Note: The front interior lamp switches are on the overhead console. The exact location of each button on the overhead console depends upon your vehicle features. Note: Press the button to switch the door function off when you open any door. When the door function is off and you open a door, the courtesy and door lamps stay off.
Lighting Rear Interior Lamp E199027 Press the button to switch the lamps on or off. AMBIENT LIGHTING (If Equipped) Adjust the ambient lighting using the touchscreen. See your SYNC information.
Windows and Mirrors POWER WINDOWS WARNINGS Do not leave children unattended in your vehicle and do not let them play with the power windows. Failure to follow this instruction could result in personal injury. When closing the power windows, verify they are free of obstruction and make sure that children and pets are not in the proximity of the window openings. Note: You may hear a pulsing noise when just one of the windows is open. Lower the opposite window slightly to reduce this noise.
Windows and Mirrors Window Lock E144072 Press the control to lock or unlock the rear window controls. It will illuminate when you lock the rear window controls. Accessory Delay You can use the window switches for several minutes after you switch the ignition off or until you open either front door. GLOBAL OPENING AND CLOSING Note: You can switch this feature on and off in the information display or contact an authorized dealer. See General Information (page 109).
Windows and Mirrors Fold-Away Exterior Mirrors Push the mirror toward the door window glass. Make sure that you fully engage the mirror in its support when returning it to its original position. Auto-Folding Mirrors (If Equipped) E144073 A Left-hand mirror. B Adjustment control. C Right-hand mirror. To adjust a mirror: 1. Select the mirror you want to adjust. The control will light. 2. Adjust the position of the mirror. 3. Press the mirror control again.
Windows and Mirrors Loose Mirror Memory Mirrors (If Equipped) If your auto-folding mirrors are manually folded or unfolded, they may not work properly even after you re-position them. You need to reset them if: • The mirrors vibrate when you drive. • The mirrors feel loose. • The mirrors do not stay in the folded or unfolded position. • One of the mirrors is not in its normal driving position. You can save and recall the mirror positions through the memory function. See Memory Function (page 143).
Windows and Mirrors C The image of the approaching vehicle is small and near the inboard edge of the main mirror when it is at a distance. The image becomes larger and begins to move outboard across the main mirror as the vehicle approaches (A). The image will transition from the main mirror and begin to appear in the blind spot mirror as the vehicle approaches (B). The vehicle will transition to your peripheral field of view as it leaves the blind spot mirror (C).
Windows and Mirrors SUN VISORS Illuminated Vanity Mirror The moonroof and sunscreen controls are on the overhead console and have a one-touch open and close feature. To stop the motion during a one-touch operation, touch the control a second time. E162197 E138666 Rotate the sun visor toward the side window and extend it rearward for extra shade. Lift the cover to switch the lamp on. MOONROOF (If Equipped) WARNINGS Do not let children play with the moonroof or leave them unattended in the vehicle.
Windows and Mirrors Bounce-Back Power Sunscreen The moonroof will stop automatically and reverse some distance if an obstacle is detected while closing. Touch and hold (C) within two seconds of a bounce-back event to override this function. Venting the Moonroof Touch (B) to vent the moonroof. E144499 Touch (C) to close it. E145985 A Open B Vent A Close C Close B Open Touch the associated control to operate the sunscreen. Opening and Closing the Moonroof Touch (A) to open the moonroof.
Windows and Mirrors Note: This position helps to reduce wind noise or rumbling which may happen with the moonroof fully open. Press and hold the control again to fully open the moonroof. Press and release the front of the control to close the moonroof. The sunscreen must be open before opening the moonroof. If you touch the moonroof open control while the sunscreen is in its closed position, the sunscreen will open first followed by the moonroof.
Instrument Cluster GAUGES E170368 103 MKC (TME) Canada/United States of America, JJ7J 19A321 AA enUSA, Edition date: 201707, Second Printing
Instrument Cluster A Tachometer B Information display C Speedometer D Fuel gauge E Engine coolant temperature gauge After refueling some variability in needle position is normal: • • Information Display Vehicle Settings and Personalization See General Information (page 109). Fuel Gauge • It may take a short time for the needle to reach full after leaving the gas station. This is normal and depends upon the slope of pavement at the gas station.
Instrument Cluster Note: Some warning indicators appear in the information display and operate the same as a warning lamp but do not illuminate when you start your vehicle. Adaptive Cruise Control Indicator (If Equipped) E144524 It illuminates when you switch the system on. It illuminates white when the system is in standby mode. It illuminates green when you set the adaptive cruise speed. See Using Adaptive Cruise Control (page 210).
Instrument Cluster Brake System Warning Lamp WARNING Driving your vehicle with the warning lamp on is dangerous. A significant decrease in braking performance may occur. It may take you longer to stop your vehicle. Have your vehicle checked as soon as possible. Driving extended distances with the parking brake engaged can cause brake failure and the risk of personal injury. E138644 See Using Cruise Control (page 209).
Instrument Cluster Heads Up Display (If Equipped) A red beam of lights will illuminate on the windshield in certain E156133 instances when using adaptive cruise control or the collision warning system. It will also illuminate momentarily when you start your vehicle to make sure the display works. Headlamp High Beam Indicator It illuminates when you switch the headlamp high beam on. Hood Ajar E159324 Displays when the ignition is on and the hood is not completely closed.
Instrument Cluster Service Engine Soon If it illuminates when the engine is running this indicates a malfunction. The On Board Diagnostics system has detected a malfunction of the vehicle emission control system. If it flashes, engine misfire may be occurring. Increased exhaust gas temperatures could damage the catalytic converter or other vehicle components. Drive in a moderate fashion (avoid heavy acceleration and deceleration) and have your vehicle immediately serviced.
Information Displays GENERAL INFORMATION Information Display Controls • • WARNING Driving while distracted can result in loss of vehicle control, crash and injury. We strongly recommend that you use extreme caution when using any device that may take your focus off the road. Your primary responsibility is the safe operation of your vehicle. We recommend against the use of any hand-held device while driving and encourage the use of voice-operated systems when possible.
Information Displays Trip 1 & 2 Distance to E Normal or Towing Average fuel economy Trip timer Press and hold OK to reset the currently displayed trip information. • • • Trip odometer — shows the accumulated trip distance. Trip Timer— when you switch your vehicle off the timer stops and then restarts when you restart your vehicle. Average fuel economy — shows the average fuel economy for a given trip. Fuel Economy Use the left or right arrow buttons to choose the desired fuel economy display.
Information Displays Driver Assist Use the up or down arrow buttons to choose between the following display options.
Information Displays Settings In this mode, you can configure different driver setting choices. Note: Some MyKey items will only appear if a MyKey is set. Settings Vehicle Drive Control DTE Calculation Easy Entry/Exit Auto Engine Off Lighting Locks Mirror Oil Life Power Liftgate Enable or Disable Remote Start Windows Wipers MyKey Create MyKey 112 MKC (TME) Canada/United States of America, JJ7J 19A321 AA enUSA, Edition date: 201707, Second Printing Note: Some items are optional and may not appear.
Information Displays Settings 911 Assist Do Not Disturb Traction Control Max Speed Speed Minder Volume Limiter Clear MyKeys Display Distance Unit Temperature Unit Tire Pressure Language Speedo in km/h 113 MKC (TME) Canada/United States of America, JJ7J 19A321 AA enUSA, Edition date: 201707, Second Printing
Information Displays Press the OK button to acknowledge and remove some messages from the information display. The information display will automatically remove other messages after a short time. INFORMATION MESSAGES Note: Depending on your vehicle options and instrument cluster type, not all of the messages will display or be available. The information display may abbreviate or shorten certain messages. You need to confirm certain messages before you can access the menus.
Information Displays Adaptive Cruise Control Message Action Adaptive Cruise Malfunction A radar malfunction is preventing the adaptive cruise control from engaging. See Using Adaptive Cruise Control (page 210). Adaptive Cruise Not Available A condition exists such that the adaptive cruise cannot function properly. See Using Adaptive Cruise Control (page 210).
Information Displays AdvanceTrac™ Message Action Service AdvanceTrac The system detects a malfunction due to a blocked sensor. AdvanceTrac Off On The driver has disabled or enabled the traction control. Message Action Occupant Sensor BLOCKED Remove Objects Near Passenger Seat The system detects a malfunction due to a blocked sensor. Remove blockage. Airbag Alarm Message Action Vehicle Alarm To Stop Alarm, Start Vehicle. Alarm triggered due to unauthorized entry. See Anti-Theft Alarm (page 77).
Information Displays All-Wheel Drive Message Action AWD Temporarily Disabled The all-wheel drive system temporarily turns off to protect itself from overheating. AWD OFF The all-wheel drive system temporarily turns off to protect itself from overheating or if you are using the temporary spare tire. AWD Restored The all-wheel drive system will resume normal function and clear this message after driving a short distance with the road tire re-installed or after the system cools.
Information Displays Auto Start-Stop Message Action Auto StartStop Press Brake to Start Engine The engine needs to be restarted, press the brake pedal to start. Auto StartStop Press Brake Harder to Activate The engine needs to be restarted, press the brake pedal harder to start. Auto StartStop Press a Pedal to Start Engine The engine needs to be restarted, press any pedal to start. Auto StartStop Select Neutral To Start Engine Select neutral for the system to restart the engine.
Information Displays Battery and Charging System Message Action Check Charging System The charging system needs servicing. If the warning stays on or continues to come on, contact an authorized dealer as soon as possible. Low Battery Features Temporarily Turned The battery management system detects an extended low-voltage condition. Your vehicle will disable various features to help preserve the battery. Turn off as many of the electrical loads as Off soon as possible to improve system voltage.
Information Displays Blind Spot Information and Cross Traffic Alert System Message Action Blindspot System Fault A fault with the system has occurred. Contact an authorized dealer as soon as possible. Blindspot Not Available Sensor Blocked See Manual The system sensors are blocked. See Blind Spot Information System (page 224). Vehicle Coming From X The system detects a vehicle. See Blind Spot Information System (page 224).
Information Displays Doors and Locks Message Action X Door Ajar The door(s) listed is not completely closed. Trunk Ajar The luggage compartment is not completely closed. Hood Ajar The hood is not completely closed. Switches Inhibited Security Mode The system has disabled the door switches. Child Lock Malfunction Service Required There is a system malfunction with the child locks. Contact an authorized dealer as soon as possible.
Information Displays Fuel Message Action Fuel Level Low An early reminder of a low fuel condition. Check Fuel Fill Inlet The fuel fill inlet may not be properly closed. Hill Start Assist Message Action Hill Start Assist Not Available Hill start assist is not available. Contact an authorized dealer. See Auto Hold (page 190). Keys and Intelligent Access Message Action To START Press Brake A reminder to press the brake while starting the vehicle.
Information Displays Message Action Key Program Successful You have successfully programmed an intelligent access key to the system. Key Program Failure You have failed to program an intelligent access key to the system. Max Number of Keys Learned You have programmed the maximum number of keys to the system. Not Enough Keys Learned You have not programmed enough keys to the system. Key Battery Low Replace Soon The key battery is low. Change the battery as soon as possible.
Information Displays Maintenance Message Action Low Engine Oil Pressure Stop your vehicle as soon as safely possible and turn off the engine. Check the oil level. If the warning stays on or continues to come on with your engine running, contact an authorized dealer as soon as possible. Change Engine Oil Soon The engine oil life remaining is 10% or less. See Engine Oil Check (page 289). Oil Change Required The oil life left is at 0%. See Engine Oil Check (page 289).
Information Displays MyKey Message Action MyKey not Created You cannot program a MyKey. MyKey Active Drive Safely MyKey is active. Speed Limited to XX MPH/km/h When switching on your vehicle and MyKey is in use, displays that the MyKey speed limit is on. Near Vehicle Top Speed MyKey is in use and the MyKey speed limit is on and the vehicle speed is approaching 80 mph (130 km/h). Vehicle at Top Speed of MyKey Setting You have reached the speed limit set for your MyKey.
Information Displays Park Aid Message Action Check Front Park Aid The system has detected a condition that requires service. Contact an authorized dealer. See Front Parking Aid (page 198). Check Rear Park Aid The system has detected a condition that requires service. Contact an authorized dealer. See Rear Parking Aid (page 197). Front Park Aid On Off Displays the park aid status. Rear Park Aid On Off Displays the park aid status.
Information Displays Message Action To Release: Press Brake and Switch The electric parking brake is set but you have not released it and your vehicle is moving. Park Brake Limited Function Service Required The electric park brake system has detected a condition that requires service. See an authorized dealer. Park Brake System Overheated You have not released the electric parking brake causing it to overheat. Release Park Brake The electric parking brake is set and you have started your vehicle.
Information Displays Remote Start Message Action To Drive: Press Brake and Gear Shift Button A reminder to apply the brake and push the gearshift button to drive your vehicle after a remote start. Seats Message Action Memory Recall Not Permitted While Driving A reminder that memory seats are not available while driving. Memory {0} Saved Shows where you have saved your memory setting. Starting System Message Action To START Press Brake A reminder to apply the brake when starting your vehicle .
Information Displays Tire Pressure Monitoring System Message Action Tire Pressure Low One or more tires on your vehicle has low tire pressure. See Tire Pressure Monitoring System (page 332). Tire Pressure Monitor Fault The tire pressure monitoring system is malfunctioning. If the warning stays on or continues to come on, contact an authorized dealer. See Tire Pressure Monitoring System (page 332). Tire Pressure Sensor Fault A tire pressure sensor is malfunctioning or your spare tire is in use.
Information Displays Trailer Message Action Trailer Sway Reduce Speed Displays when the trailer sway control has detected a trailer sway. See Trailer Sway Control (page 243). Transmission Message Action Transmission Malfunction Service Now See an authorized dealer. Transmission Overheating Stop Safely The transmission is overheating and needs to cool. Stop in a safe place as soon as possible. Transmission Service Required See an authorized dealer.
Information Displays Message Action Transmission IndicatMode Lockup On The transmission is locked and unable to select gears. Transmission IndicatMode Lockup Off The transmission is unlocked and free to select gears. Invalid Gear Selection You have selected an invalid gear. Press Brake Pedal You need to depress the brake pedal. Depress Brake to Shift from Park You need to depress the brake pedal before you can shift from P park.
Information Displays Message Action SHIFT SYS FAULT Reverse Unavailable Service Required There is a system fault while you are shifting your vehicle to R reverse. See your authorized dealer. SHIFT SYS FAULT Drive Unavailable Select S for Drive Service Required See an authorized dealer. SHIFT SYS FAULT Neutral Unavailable Service Required See an authorized dealer. SHIFT SYS FAULT Neutral Unavailable Service Required See an authorized dealer.
Climate Control AUTOMATIC CLIMATE CONTROL Note: You can switch temperature units between Fahrenheit and Celsius. See your SYNC information.
Climate Control A Left-hand temperature control. Fan Speed Control Recirculated Air B Fan speed control. C Right-hand temperature control. Adjusts the volume of air circulated in the vehicle. D MAX A/C. Right-hand Temperature Control E A/C. F Recirculated air. Adjusts the temperature setting on the right-hand side. Press to switch between outside air and recirculated air. The air currently in the passenger compartment recirculates.
Climate Control Dual Defrost Press to switch on temperature control for the right-hand side of the vehicle. When dual zone is off, right-hand temperature settings remain the same as the left-hand settings. Press to distribute air through the windshield air vents and de-mister. Air directed to the instrument panel and footwell air vents turns off. You can also use this setting to defog and clear the windshield of a thin covering of ice. Auto Press to switch on automatic operation.
Climate Control Note: If you select AUTO during cold outside temperatures, the system directs air flow to the windshield and side window vents. In addition, the fan may run at a slower speed until the engine warms up. Note: If you select AUTO during hot temperatures and the inside of the vehicle is hot, the system uses recirculated air to maximize interior cooling. Fan speed may also reduce until the air cools. Recommended Settings for Cooling Heated Rear Window 1. Press AUTO.
Climate Control Windshield Wiper De-icer (If Equipped) When you switch the heated rear window on, the windshield wiper de-icer turns on. CABIN AIR FILTER Your vehicle is equipped with a cabin air filter, which gives you and your passengers the following benefits: • It improves your driving comfort by reducing particle and odor concentration. • It improves the interior compartment cleanliness. • It protects the climate control components from particle deposits.
Seats • SITTING IN THE CORRECT POSITION WARNINGS Sitting improperly, out of position or with the seatback reclined too far can take weight off the seat cushion and affect the decision of the passenger sensing system, resulting in serious injury or death in the event of a crash. Always sit upright against your seat back, with your feet on the floor. Do not recline the seatback as this can cause the occupant to slide under the safety belt, resulting in serious injury in the event of a crash.
Seats WARNINGS The head restraint is a safety device. Whenever possible it should be installed and properly adjusted when the seat is occupied. Failure to adjust the head restraint properly could reduce its effectiveness during certain impacts. Note: Adjust the seat backrest (front seats only) to an upright driving position before adjusting the head restraint. Adjust the head restraint so that the top of it is level with the top of your head and as far forward as possible.
Seats The rear center head restraint consists of: A An energy absorbing head restraint. B Two steel stems. C Guide sleeve unlock and remove button. Installing the Head Restraint Align the steel stems into the guide sleeves and push the head restraint down until it locks. Folding the Rear Seat Head Restraint Adjusting the Head Restraint 1. Press and hold button E. 2. Pull the head restraint back up to reset. Raising the Front Seat Head Restraint Tilting Head Restraints Pull the head restraint up.
Seats POWER SEATS WARNINGS Do not adjust the driver seat or seat backrest when your vehicle is moving. This may result in sudden seat movement, causing the loss of control of your vehicle. WARNINGS Do not place cargo or any objects behind the seat backrest before returning it to the original position. Pull on the seat backrest to make sure that it has fully latched after returning the seat backrest to its original position. An unlatched seat may become dangerous if you stop suddenly or have a crash.
Seats E144632 142 MKC (TME) Canada/United States of America, JJ7J 19A321 AA enUSA, Edition date: 201707, Second Printing
Seats Power Lumbar Four-Way Power Lumbar (If Equipped) MEMORY FUNCTION WARNINGS Before activating the memory seat, make sure that the area immediately surrounding the seat is clear of obstructions and that all occupants are clear of moving parts. Do not use the memory function when your vehicle is moving. E165608 E223345 A Press to increase upper lumbar only. B Press to decrease upper and lower lumbar. C Press to increase lower lumbar only. D Press to increase upper and lower lumbar.
Seats Recalling a PreSet Position Press and release the preset button associated with your desired driving position. The memory features move to the position stored for that preset. Note: You can only recall a preset memory position when the ignition is off, or when the transmission in park (P) or neutral (N) if the ignition is on. E142554 Saving a PreSet Position 1. Switch the ignition on. 2. Adjust the memory features to your desired position. 3.
Seats Easy Entry and Exit Feature Folding the Seatback REAR SEATS If you enable the easy entry and exit feature, it automatically moves the driver seat position rearward up to 2 in (5 cm) when you switch the ignition off. The driver seat returns to the previous position when you switch the ignition on. With the seat empty, pull the lever up to fold the seatback forward. You may need to fold the outboard head restraints and lower the center head restraint first.
Seats HEATED SEATS (If Equipped) Front Seats WARNING People who are unable to feel pain to their skin because of advanced age, chronic illness, diabetes, spinal cord injury, medication, alcohol use, exhaustion or other physical conditions, must exercise care when using the heated seat. The heated seat may cause burns even at low temperatures, especially if used for long periods of time. Do not place anything on the seat that insulates against heat, such as a blanket or cushion.
Seats Do not do the following: • Place heavy objects on the seat. • Operate the seat heater if water or any other liquid spills on the seat. Allow the seat to dry thoroughly. Note: The heated seats will only function when the engine is running. The rear seat heat controls are located on the rear of the center console. E146322 Press the heated seat symbol to cycle through the various heat settings and off. More indicator lights indicate warmer settings.
Seats Note: Depending on your remote start settings, the heated seats may remain on after you remote start your vehicle. The heated seats may also turn on when you start your vehicle if they were on when your vehicle was turned off. Cooled Seats Note: The cooled seats only function when the engine is running. Note: Depending on your remote start settings, the cooled seats may remain on after you remote start your vehicle.
Universal Garage Door Opener (If Equipped) HomeLink Wireless Control System WARNINGS Make sure that the garage door and security device are free from obstruction when you are programming. Do not program the system with the vehicle in the garage. Do not use the system with any garage door opener that does not have the safety stop and reverse feature as required by U.S. Federal Safety Standards (this includes any garage door opener manufactured before April 1, 1982).
Universal Garage Door Opener (If Equipped) E188212 1. With your vehicle parked outside of the garage, switch your ignition to the on position, but do not start your vehicle. 2. Press and release the function button that you would like to program. 3. Hold your hand-held garage door transmitter 1–3 in (2–8 cm) away from the HomeLink button you want to program. 4. Press and hold the hand-held transmitter button you want to program while watching the indicator light on HomeLink.
Universal Garage Door Opener (If Equipped) Gate Operator / Canadian Programming Canadian radio-frequency laws require transmitter signals to “time-out” (or quit) after several seconds of transmission – which may not be long enough for HomeLink to pick up the signal during programming. Similar to this Canadian law, some U.S. gate operators are designed to “time-out” in the same manner. E188212 3. Press and hold the function button you want to program for 2 seconds, then release. Repeat this step.
Universal Garage Door Opener (If Equipped) 2. The indicator light begins to flash after 20 seconds. Without releasing the button, follow Step 1 in the Programming section. For questions or comments, contact HomeLink at www.homelink.com, www.youtube.com/user/HomeLinkGentex or by calling the toll-free help line at 1-800-355-3515. FCC and RSS-210 Industry Canada Compliance This device complies with Part 15 of the FCC Rules and with RSS-210 of Industry Canada.
Auxiliary Power Points 12 Volt DC Power Point WARNING Do not plug optional electrical accessories into the cigar lighter socket. Incorrect use of the cigar lighter can cause damage not covered by the vehicle warranty, and can result in fire or serious injury. Note: When you switch the ignition on, you can use the socket to power 12 volt appliances with a maximum current rating of 15 amps. If the power supply does not work after you switch the ignition off, switch the ignition on.
Auxiliary Power Points The power outlet temporarily turns off power when in fault mode if the device exceeds the 150 watt limit. Unplug your device and switch the ignition off. Switch the ignition back on, but do not plug your device back in. Let the system cool off and switch the ignition off to reset the fault mode. Switch the ignition back on and make sure the indicator light remains on.
Storage Compartments CENTER CONSOLE Stow items in the cup holder carefully as items may become loose during hard braking, acceleration or crashes, including hot drinks which may spill. Storage compartment with auxiliary power point. D Auxiliary power point and AC power outlet (if equipped). OVERHEAD CONSOLE Available console features include: A B C C D E171511 E224352 A Front storage bin with auxiliary power point and USB port. B Cup holder. Press near the rear edge of the door to open it.
Starting and Stopping the Engine GENERAL INFORMATION WARNINGS Extended idling at high engine speeds can produce very high temperatures in the engine and exhaust system, creating the risk of fire or other damage. Do not park, idle or drive your vehicle on dry grass or other dry ground cover. The emission system heats up the engine compartment and exhaust system, creating the risk of fire. Do not start the engine in a closed garage or in other enclosed areas. Exhaust fumes can be toxic.
Starting and Stopping the Engine Note: You may have to press the push button ignition switch twice to switch the ignition on. Start: Starts the engine. • Press the brake pedal, and then press the button for any length of time. An indicator light on the button illuminates when then ignition is on and when the engine starts. Before starting the engine, check the following: • Make sure all occupants have fastened their safety belts. • Make sure the headlamps and electrical accessories are off.
Starting and Stopping the Engine Within 20 seconds of switching the engine off, press the brake pedal and press the button. After 20 seconds have expired, you can no longer restart the engine without the key present inside your vehicle. Once the engine has started, it remains running until you press the button, even if the system does not detect a valid key. If you open and close a door while the engine is running, the system searches for a valid key.
Starting and Stopping the Engine • • • You can reset the timer by interacting with your vehicle (such as pressing the brake pedal or accelerator pedal). You can temporarily switch off the shutdown feature any time the ignition is on (for the current ignition cycle only). Use the information display to do so. See Information Displays (page 109).
Starting and Stopping the Engine ENGINE BLOCK HEATER (If Equipped) WARNINGS Failure to follow engine block heater instructions could result in property damage or serious personal injury. Do not use your heater with ungrounded electrical systems or two-pronged adapters. There is a risk of electrical shock. Do not fully close the hood, or allow it to drop under its own weight when using the engine block heater.
Unique Driving Characteristics AUTO-START-STOP (If Equipped) WARNINGS Always fully apply the parking brake. Make sure you shift into park (P) for vehicles with an automatic transmission. Switch the ignition off and remove the key whenever you leave your vehicle. Before opening the hood or performing any maintenance, fully apply the parking brake, shift into park (P) or neutral (N) and switch the ignition off. Always switch the ignition off before leaving the vehicle.
Unique Driving Characteristics If the instrument cluster is equipped with a grey Auto-Start-Stop indicator light, it is illuminated when automatic engine stop is not available due to one of the above noted conditions not being met. • E146361 Automatic Engine Restart • • • The battery is not within optimal operating conditions. The maximum engine off time is exceeded. When you press the Auto-Start-Stop button while the engine is stopped automatically. The heated windshield is turned on.
Unique Driving Characteristics If your vehicle is in an Auto-Start-Stop state and you shift the transmission to reverse while the brake is not depressed, a message telling you to press the brake will appear. You must press the brake pedal within 10 seconds, or a shift to park and a manual restart will be required. Note: If the Shift to P, Restart Engine message appears and the amber Auto-Start-Stop indicator light is flashing, automatic restart is not available. The vehicle must be restarted manually.
Fuel and Refueling SAFETY PRECAUTIONS WARNINGS Do not overfill the fuel tank. The pressure in an overfilled tank may cause leakage and lead to fuel spray and fire. The fuel system may be under pressure. If you hear a hissing sound near the fuel filler inlet, do not refuel until the sound stops. Otherwise, fuel may spray out, which could cause serious personal injury. Fuels can cause serious injury or death if misused or mishandled. Fuel may contain benzene, which is a cancer-causing agent.
Fuel and Refueling Your vehicle is designed to operate on regular unleaded gasoline with a minimum pump (R+M)/2 octane rating of 87. Some fuel stations, particularly those in high altitude areas, offer fuels posted as regular unleaded gasoline with an octane rating below 87. For best overall vehicle and engine performance, premium fuel with an octane rating of 91 or higher is recommended.
Fuel and Refueling Filling a Portable Fuel Container WARNING Flow of fuel through a fuel pump nozzle can produce static electricity. This can cause a fire if you are filling an ungrounded fuel container. Use the following guidelines to avoid electrostatic charge build-up, which can produce a spark, when filling an ungrounded fuel container: • Only use an approved fuel container to transfer fuel to your vehicle. Place the container on the ground when filling it.
Fuel and Refueling Note: Extra funnels can be purchased from an authorized dealer if you choose to dispose of the funnel. A B REFUELING C D B E206911 A C E267248 A Fuel filler door. B Fuel tank filler valve. C Fuel tank filler pipe. Left-hand side. Pull the rear of the fuel filler door to open it. D Right-hand side. Pull the rear of the fuel filler door to open it. Refueling Your Vehicle Refueling System Overview A C B Left-hand side.
Fuel and Refueling WARNINGS Do not remove the fuel pump nozzle from its fully inserted position when refueling. A A Stop refueling when the fuel pump nozzle automatically shuts off for the first time. Failure to follow this will fill the expansion space in the fuel tank and could lead to fuel overflowing. Do not overfill the fuel tank. The pressure in an overfilled tank may cause leakage and lead to fuel spray and fire.
Fuel and Refueling 9. Fully close the fuel filler door. Message Check Fuel Fill Inlet If the message appears, do the following: E119081 6. When you finish refueling slightly raise the fuel pump nozzle and slowly remove it. 7. Fully close the fuel filler door. Do not attempt to start the engine if you have filled the fuel tank with incorrect fuel. Incorrect fuel use could cause damage not covered by the vehicle Warranty. Have your vehicle immediately checked.
Fuel and Refueling Filling the Fuel Tank For consistent results when refueling: • Turn the ignition off before fueling; an inaccurate reading results if the engine is left running. • Use the same fill rate (low-medium-high) each time the tank is filled. • Allow no more than one automatic shut-off when refueling. Results are most accurate when the filling method is consistent.
Engine Emission Control EMISSION LAW WARNING Do not remove or alter the original equipment floor covering or insulation between it and the metal floor of the vehicle. The floor covering and insulation protect occupants of the vehicle from the engine and exhaust system heat and noise. On vehicles with no original equipment floor covering insulation, do not carry passengers in a manner that permits prolonged skin contact with the metal floor.
Engine Emission Control • • • • An open or pinched sensor hose. Incorrect engine oil level. Incorrect fuel for climatic conditions. Incorrect engine oil viscosity for climactic conditions. Note: Some vehicles have a lifetime fuel filter that is integrated with the fuel tank. Regular maintenance or replacement is not needed. Note: If these checks do not help you correct the concern, have your vehicle checked as soon as possible.
Engine Emission Control The scheduled maintenance items listed in scheduled maintenance information are essential to the life and performance of your vehicle and to its emissions system. If you use anything other than Ford, Motorcraft or Ford-authorized parts for maintenance replacements or for service of components affecting emission control, such non-Ford parts should be equivalent to genuine Ford Motor Company parts in performance and durability.
Engine Emission Control If the service engine soon indicator remains on, have your vehicle serviced at the first available opportunity. Although some malfunctions detected by the OBD-II may not have symptoms that are apparent, continued driving with the service engine soon indicator on can result in increased emissions, lower fuel economy, reduced engine and transmission smoothness and lead to more costly repairs.
Transmission Every time a gear is selected, the selected button will light up. You will also see the gear selected appear in the instrument cluster. AUTOMATIC TRANSMISSION WARNINGS Always fully apply the parking brake and make sure you shift into park (P). Failure to follow this instruction could result in personal injury or death. Do not apply the brake pedal and accelerator pedal simultaneously.
Transmission 3. The gearshift button you select will illuminate and the selected gear will appear in the instrument cluster. 4. Release the brake pedal and your transmission will remain in the selected gear. Note: If you attempt to leave your vehicle while it is in gear, the vehicle will automatically shift into park (P). Safety belt and door monitors determine your intent and make the shift for you. During this time, a message will appear in the information display screen prompting you to make the shift.
Transmission Stay in Neutral mode Entering a Carwash SelectShift Automatic™ Transmission Stay in Neutral mode allows your vehicle to stay in neutral (N) when you exit the vehicle. Your vehicle must be stationary to enter this mode. Note: Always put your vehicle in Stay in Neutral mode when entering an automatic car wash. Failure to do this could result in vehicle damage not covered by warranty. Your SelectShift Automatic transmission gives you the ability to change gears manually.
Transmission Upshifts when accelerating (recommended for best fuel economy) Gear Upshift mph (km/h) From To 1 2 15 mph (24 km/h) 2 3 25 mph (40 km/h) 3 4 40 mph (64 km/h) 4 5 45 mph (72 km/h) 5 6 50 mph (80 km/h) The transmission will automatically upshift if your engine speed is too high or downshift if your engine speed is too low. The instrument cluster will display your currently selected gear.
Transmission WARNINGS When doing this procedure, you need to take the transmission out of park (P) which means your vehicle can roll freely. To avoid unwanted vehicle movement, always fully apply the parking brake prior to doing this procedure. Use wheels chocks if appropriate. If the parking brake is fully released, but the brake warning lamp remains illuminated, the brakes may not be working properly. Have your vehicle checked as soon as possible.
Transmission Automatic Transmission Adaptive Learning This feature increases durability and provides consistent shift feel over the life of your vehicle. A new vehicle or transmission may have firm or soft shifts. This operation will not affect function or durability of your transmission and is normal. Over time, the adaptive learning process will fully update transmission operation. Additionally, the strategy must be relearned whenever the battery is disconnected or a new battery is installed.
All-Wheel Drive (If Equipped) USING ALL-WHEEL DRIVE Note: When a system malfunction is present, a warning message appears in the information display. See Information Messages (page 114). This means the system is not functioning correctly and only front-wheel drive is available. Have your vehicle checked by an authorized dealer. Note: When the system overheats and switches to front-wheel drive, a warning message appears in the information display.
All-Wheel Drive (If Equipped) When driving at slow speeds off road under high load conditions, use a low gear when possible. Low gear operation will maximize the engine and transmission cooling capability. It may be safer to stay on the shoulder of the road and slow down gradually before returning to the road. You may lose control if you do not slow down or if you turn the steering wheel too sharply or abruptly.
All-Wheel Drive (If Equipped) To resume operation, switch the ignition off and allow the system to cool down for a minimum of 15 minutes. After the system has cooled down, you will see a brief message display in the information display. See Information Messages (page 114). When driving at slow speeds in deep sand under high outside temperatures, use a low gear when possible. Low gear operation will maximize the engine and transmission cooling capability.
All-Wheel Drive (If Equipped) Start climbing a steep slope or hill in a low gear rather than downshifting to a low gear from a high gear after you have started your climb. This reduces strain on the engine and the possibility of stalling. If your vehicle stalls, do not try to turn around. Turning could cause the vehicle to roll over. Instead, reverse back to a safe location. Apply just enough power to the wheels to climb the hill.
All-Wheel Drive (If Equipped) Make sure that you allow sufficient distance between your vehicle and other vehicles for stopping. On ice and snow, you should drive more slowly than usual, and consider using one of the lower gears. In emergency stopping situations, steadily apply the brake. Your vehicle has a four wheel anti-lock brake system, do not pump the brake pedal. See Hints on Driving With Anti-Lock Brakes (page 187).
Brakes GENERAL INFORMATION Note: Occasional brake noise is normal. If a metal-to-metal, continuous grinding or continuous squeal sound is present, the brake linings may be worn-out and an authorized dealer should check them. If the vehicle has continuous vibration or shudder in the steering wheel while braking, an authorized dealer should check your vehicle. Note: Brake dust may accumulate on the wheels, even under normal driving conditions.
Brakes HINTS ON DRIVING WITH ANTILOCK BRAKES The anti-lock braking system does not eliminate the risks when: • You drive too closely to the vehicle in front of you. • Your vehicle is hydroplaning. • You take corners too fast. • The road surface is poor. Note: If the system activates, the brake pedal may pulse and may travel further. Maintain pressure on the brake pedal. You may also hear a noise from the system. This is normal.
Brakes The brake system warning lamp will flash for approximately 2 seconds then illuminate to confirm that the electric parking brake has been applied. See Instrument Cluster (page 103). If you apply the electric parking brake when your vehicle is moving, the brake system warning lamp will illuminate and a warning chime will sound. See Instrument Cluster (page 103).
Brakes 1. Pull the switch and hold it in this position. 2. Drive your vehicle, then release the switch when you notice that the engine has developed sufficient driving force. Automatic release - drive away release Your vehicle will automatically release the parking brake if all of the following conditions exist: • The driver door is closed. • The vehicle is accelerated. • There are no faults detected in the parking brake system.
Brakes When the system is active, your vehicle will remain stationary on the slope for two to three seconds after you release the brake pedal. This allows you time to move your foot from the brake to the accelerator pedal. The brakes release automatically when the engine has sufficient torque to prevent your vehicle from rolling down the grade. This is an advantage when pulling away on a slope, for example from a car park ramp, traffic lights or when reversing uphill into a parking space.
Brakes Auto Hold uses your vehicle's brakes to hold your vehicle at a stop once your vehicle has reached a standstill condition. For example, Auto Hold can assist you while stopping at traffic lights or while in traffic jams by holding the brake pressure for you once you bring your vehicle to a stop. Note: In some cases, Auto Hold might hand over to the parking brake. When the parking brake automatically applies, the red brake lamp appears. This is normal.
Brakes Note: Auto Hold is last remembered after ignition. Auto Hold also suppresses while in Reverse (R). When Auto Hold is off, your vehicle behaves the same as a vehicle without Auto Hold. There is an Auto Hold indicator lamp in the instrument cluster that has two modes, active and unavailable: The Auto Hold (ACTIVE) indicator light illuminates in the information E197933 display when the system holds your vehicle stationary.
Traction Control PRINCIPLE OF OPERATION The traction control system helps avoid drive wheel spin and loss of traction. If your vehicle begins to slide, the system applies the brakes to individual wheels and, when needed, reduces engine power at the same time. If the wheels spin when accelerating on slippery or loose surfaces, the system reduces engine power in order to increase traction.
Traction Control • • • Temporarily illuminates on engine start-up. Flashes when a driving condition activates either of the systems. Illuminates if a problem occurs in either of the systems. The stability and traction control off light temporarily illuminates on E130458 engine start-up and stays on when you switch the traction control system off.
Stability Control PRINCIPLE OF OPERATION WARNINGS Vehicle modifications involving braking system, aftermarket roof racks, suspension, steering system, tire construction and wheel and tire size may change the handling characteristics of your vehicle and may adversely affect the performance of the electronic stability control system. In addition, installing any stereo loudspeakers may interfere with and adversely affect the electronic stability control system.
Stability Control Electronic Stability Control USING STABILITY CONTROL The system enhances your vehicle’s ability to prevent skids or lateral slides by applying brakes to one or more of the wheels individually and, if necessary, reducing engine power. Roll Stability Control The system enhances your vehicle’s ability to prevent rollovers by detecting your vehicle’s roll motion and the rate at which it changes by applying the brakes to one or more wheels individually.
Parking Aids PRINCIPLE OF OPERATION WARNINGS To help avoid personal injury, always use caution when in reverse (R) and when using the sensing system. The system may not detect objects with surfaces that absorb reflection. Always drive with due care and attention. Failure to take care may result in a crash. Traffic control systems, inclement weather, air brakes, external motors and fans may affect the correct operation of the sensing system.This may cause reduced performance or false alerts.
Parking Aids E130178 Coverage area of up to 6 ft (1.8 m) from the rear bumper. There may be decreased coverage area at the outer corners of the bumper. The system detects certain objects while the transmission is in reverse (R) : • Your vehicle is moving toward a stationary object at a speed of 3 mph (5 km/h) or less. • Your vehicle is not moving, but a moving object is approaching the rear of your vehicle at a speed of 3 mph (5 km/h) or less.
Parking Aids If the transmission is in drive (D) or any other forward gear (for example, low (L), sport (S) or any forward gear in a manual transmission), the front sensing system provides audio warnings when your vehicle is moving below a speed of 7 mph (12 km/h) and an obstacle is located inside the detection area. ACTIVE PARK ASSIST (If Equipped) Parallel Parking, Parallel Park Out Assist WARNINGS You must remain in your vehicle when the system turns on.
Parking Aids • • The edge of the neighboring parked vehicle is high off the ground. For example, a bus, tow truck or flatbed truck. The weather conditions are poor. For example, during heavy rain, snow or fog. Note: Keep the sensors on the bumper or fascia free from snow, ice and large accumulations of dirt. Covered sensors can affect the system's accuracy. Do not clean the sensors with sharp objects.
Parking Aids E130107 Note: You can also switch the system on after you have already driven partially or completely past a parking space. Press the Active Park Assist button and the system informs you if you have recently passed a suitable parking space. Note: You must observe that the space the system selects remains clear of obstructions at all times during the maneuver. When the system finds a suitable space, it displays a message and a tone sounds.
Parking Aids E130108 When you believe your vehicle is properly parked, or you hear a solid tone accompanied by a display message, bring your vehicle to a complete stop. When the Active Park Assist maneuver is complete, the system displays a message and a tone sounds. Note: You are responsible for checking your parked vehicle and making any necessary corrections before leaving your vehicle.
Parking Aids E188012 The system determines the clearance to the front and rear of your vehicle and automatically steers your vehicle out of a parallel parking space (hands-free) while you control the accelerator, gearshift and brakes. The system visually and audibly guides you to enter traffic. After the system directs your vehicle past the adjacent vehicle or object, it guides you to take control of the steering to complete the exit out of the parking space.
Parking Aids If a problem occurs with the system, a warning message displays accompanied by a tone. Have your vehicle checked as soon as possible. Troubleshooting the System Symptom Possible Cause You may have the traction control system switched off. The system does not look for a space. The transmission is in reverse (R). Your vehicle must be moving forward to be able to detect a parking space. The sensors may be covered. For example, snow, ice or dirt buildup.
Parking Aids Symptom Possible Cause An irregular curb along the parking space prevents the system from aligning your vehicle properly. Improperly parked vehicles or objects are boarding the space. Your vehicle is too far past the parking space. The system performs best when you drive the same distance past the parking space. You have incorrectly installed or maintained the tires. For example, not inflated correctly, improper size, or of different sizes.
Parking Aids REAR VIEW CAMERA WARNINGS The rear view camera system is a reverse aid supplement device that still requires the driver to use it in conjunction with the interior and exterior mirrors for maximum coverage. Objects that are close to either corner of the bumper or under the bumper, might not be seen on the screen due to the limited coverage of the camera system. WARNINGS Use caution when turning camera features on or off when the transmission is not in park (P).
Parking Aids Note: If the transmission is in reverse (R) and the luggage compartment door or liftgate is open, no rear view camera features will display. Note: When towing, the camera only sees what you are towing. This might not provide adequate coverage as it usually provides in normal operation and some objects might not be seen. In some vehicles, the guidelines may disappear when you connect the trailer tow connector.
Parking Aids D Fixed guideline: Yellow zone E Fixed guideline: Red zone F Rear bumper Active guidelines are only shown with fixed guidelines. To use active guidelines, turn the steering wheel to point the guidelines toward an intended path. If you change the steering wheel position while reversing, your vehicle might deviate from the original intended path. The fixed and active guidelines fade in and out depending on the steering wheel position.
Cruise Control PRINCIPLE OF OPERATION Cruise control lets you maintain a set speed without keeping your foot on the accelerator pedal. You can use cruise control when your vehicle speed is greater than 20 mph (30 km/h). To help the system to maintain the set speed when going downhill, downshift to a lower gear. Changing the Set Speed Note: If you accelerate by pressing the accelerator pedal, the set speed will not change.
Cruise Control Switching Cruise Control Off Note: You erase the set speed when you switch the system off. Press OFF when the system is in stand by mode, or switch the ignition off. USING ADAPTIVE CRUISE CONTROL WARNINGS Always pay close attention to changing road conditions when using adaptive cruise control. The system does not replace attentive driving. Failing to pay attention to the road may result in a crash, serious injury or death.
Cruise Control E144529 The indicator, current gap setting and set speed appear in the information display. Note: When you are following a vehicle and you switch on a direction indicator, adaptive cruise control may provide a small temporary acceleration to help you pass. Note: The brakes may emit noise when applied by the system. E164805 5. A vehicle graphic illuminates if there is a vehicle detected in front of you.
Cruise Control If the system determines that its maximum braking level is not sufficient, an audible warning sounds when the system continues to brake. A red warning bar displays on the windshield and you must take immediate action. Adaptive Cruise Control Gap Settings A B Setting the Gap Distance Note: The gap setting is time dependent and therefore the distance adjusts with your vehicle speed. Note: It is your responsibility to select a gap appropriate to the driving conditions.
Cruise Control When you override the system, the green indicator light illuminates and the vehicle graphic does not appear in the information display. Canceling the Set Speed Hilly Condition Usage Press CNCL or tap the brake pedal. The set speed does not erase. The system resumes operation when you release the accelerator pedal. The vehicle speed decreases to the set speed, or a lower speed if following a slower vehicle.
Cruise Control Detection Issues Detection issues can occur: WARNINGS On rare occasions, detection issues can occur due to the road infrastructures, for example bridges, tunnels and safety barriers. In these cases, the system may brake late or unexpectedly. At all times, you are responsible for controlling your vehicle, supervising the system and intervening, if required. If the system malfunctions, have your vehicle checked as soon as possible.
Cruise Control System Not Available Blocked Sensor Note: You cannot see the sensor. It is behind a fascia panel. The system may not turn on if there is: • A blocked sensor. • High brake temperature. • A failure in the system or a related system. A message displays if something obstructs the radar signals from the sensor. The sensor is in the lower grille. The system cannot detect a vehicle ahead and does not function when something blocks the sensor.
Cruise Control Cause Action Water, snow or ice on the surface of the road may interfere with the radar signals. Do not use the system in these conditions because it may not detect any vehicles ahead. You are in a desert or remote area with no other vehicles and no roadside objects. Wait a short time or switch to normal cruise control. Due to the nature of radar technology, it is possible to get a blockage warning with no actual block.
Driving Aids DRIVER ALERT (If Equipped) PRINCIPLE OF OPERATION WARNINGS You are responsible for controlling your vehicle at all times. The system is designed to be an aid and does not relieve you of your responsibility to drive with due care and attention. Failure to follow this instruction could result in the loss of control of your vehicle, personal injury or death. The system may not function if the sensor is blocked.
Driving Aids The yellow position indicates the first warning is active and the red position indicates the second warning is active. When active, the system monitors your alertness level based upon your driving behavior in relation to the lane markings and other factors. Note: If you have recently received a warning, you should consider resting, even if the current assessment is within the typical range. System Warnings Note: The system does not issue warnings below approximately 40 mph (64 km/h).
Driving Aids LANE KEEPING SYSTEM (If Equipped) WARNINGS The system is designed to aid the driver. It is not intended to replace your attention and judgment. You are still responsible to drive with due care and attention. Always drive with due care and attention when using and operating the controls and features on your vehicle. At all times, you are responsible for controlling your vehicle, supervising the system and intervening, if required.
Driving Aids Aid only – Provides an assistance steering torque input toward the lane center when the system detects an unintended lane departure. E132099 Press the button on the direction indicator stalk to switch the system on or off. System Settings The system has optional setting menus available. The system stores the last known selection for each of these settings. You do not need to readjust your settings each time you switch the system on.
Driving Aids Note: The alert and aid diagrams illustrate general zone coverage. They do not provide exact zone parameters. Intensity: This setting affects the intensity of the steering wheel vibration used for the alert and alert + aid modes. This setting does not affect the aid mode. • • • Low Normal High System Display When you switch the system on, an overhead graphic of a vehicle with lane markings appears in the information display.
Driving Aids • Using the turn signal indicator. • • Evasive steering maneuver. Driving too close to the lane marking. Troubleshooting Why is the feature not available (line markings are gray) when I can see the lane markings on the road? Your vehicle speed is outside the operational range of the feature. The sun is shining directly into the camera lens. A quick intentional lane change has occurred. Your vehicle stays too close to the lane markings. Driving at high speeds in curves.
Driving Aids Why is the feature not available (line markings are gray) when I can see the lane markings on the road? There is standing water on the road. Faint lane markings, for example partial yellow lane markings on concrete roads. Lane width is too narrow or too wide. The camera has not been calibrated after a windshield replacement. Driving on tight roads or on uneven roads.
Driving Aids BLIND SPOT INFORMATION SYSTEM (If Equipped) A Using the Blind Spot Information System Vehicles with Automatic Transmission WARNINGS Do not use the blind spot information system as a replacement for using the interior and exterior mirrors or looking over your shoulder before changing lanes. The blind spot information system is not a replacement for careful driving. The system may not operate properly during severe weather conditions, for example snow, ice, heavy rain and spray.
Driving Aids System Lights and Messages System Errors Blocked Sensors If the system detects a fault, a warning lamp illuminates and a message displays. See Information Messages (page 114). Switching the System Off and On E205199 E142442 When the system detects a vehicle, an alert indicator illuminates in the exterior mirror on the side the approaching vehicle is coming from. If you turn the direction indicator on for that side of your vehicle, the alert indicator flashes.
Driving Aids CROSS TRAFFIC ALERT (If Equipped) WARNINGS Do not use the cross traffic alert system as a replacement for using the interior and exterior mirrors or looking over your shoulder before reversing out of a parking space. The cross traffic alert system is not a replacement for careful driving. WARNINGS The system may not operate properly during severe weather conditions, for example snow, ice, heavy rain and spray. Always drive with due care and attention.
Driving Aids E142440 The sensor on the left-hand side is only partially obstructed and zone coverage on the right-hand side is maximized.
Driving Aids E142441 Zone coverage also decreases when parking at narrow angles. The sensor on the left-hand side is mostly obstructed and zone coverage on that side is severely reduced.
Driving Aids System Lights, Messages and Audible Alerts Blocked Sensors System Limitations E205199 The sensors are behind the rear bumper on both sides of your vehicle. E142442 When the system detects a vehicle, an indicator illuminates in the exterior mirror on the side the approaching vehicle is coming from. A tone sounds and a message appears in the information display.
Driving Aids Note: The system turns on each time you switch the ignition on and you shift into reverse (R). If you temporarily switch the system off, it turns on the next time you switch the ignition on. Note: The system may not correctly operate when towing a trailer. For vehicles with a trailer tow module and tow bar approved by us, the system turns off when you attach a trailer.
Driving Aids Note: A high crown in the road or high crosswinds may also make the steering seem to wander or pull. COLLISION WARNING SYSTEM (If Equipped) E156130 Adaptive Learning Principle Of Operation The electronic power steering system adaptive learning helps correct road irregularities and improves overall handling and steering feel. It communicates with the brake system to help operate advanced stability control and accident avoidance systems.
Driving Aids The brake support system assists you in reducing any collision speed by pre-charging the brakes. If the risk of collision continues to increases after the audio-visual warning, the brake support prepares the brake system for rapid braking. The system does not automatically activate the brakes, but if the brake pedal is pressed even lightly, the brakes apply full stopping power.
Driving Aids Cause Action The radar sensor cover in the grille is dirty or obstructed. Clean the radar sensor cover or remove the obstruction. The surface of the radar sensor cover is clean but the message remains in the display. Wait a short time. The radar may take several minutes to reset after you remove the obstruction. Heavy rain, spray, snow or fog in the air interferes with the radar signals. The collision warning system is temporarily disabled.
Driving Aids DRIVE CONTROL (If Equipped) LINCOLN DRIVE CONTROL Lincoln Drive Control delivers the Lincoln driving experience through a suite of sophisticated electronic vehicle systems. These systems continuously monitor your driving inputs and the road conditions to optimize ride comfort, steering, handling, powertrain response and sound. You can preset your preferences for these systems within the information display.
Driving Aids These systems have a range of modes which you can choose from in order to customize your ideal driving experience: • Comfort – Provides a more relaxed driving experience, maximizing comfort. Your steering effort decreases and the suspension movement is more fluid. Comfort mode is ideal when you desire enhanced traveling comfort. • Normal – Delivers a balanced combination of comfortable, controlled ride and confident handling.
Load Carrying REAR UNDER FLOOR STORAGE (If Equipped) Cargo Management System LUGGAGE COVERS WARNINGS Make sure that the posts are properly latched in mounting features. The cover may cause injury in a sudden stop or accident if it is not securely installed. Do not place any objects on the cargo area shade. They may obstruct your vision or strike occupants of your vehicle in a sudden stop or crash.
Load Carrying The maximum recommended load is 50 lb (22 kg) for vehicles with a panoramic roof, and 80 lb (36 kg) for vehicles without a panoramic roof. For vehicles with adaptive suspension, the maximum recommended load is 80 lb (36 kg), regardless of roof type. Evenly distribute the load on the roof rack. Note: Never place loads directly on the roof panel. The intended design of the roof panel is not to directly carry a load. Make sure that you securely fasten the load.
Load Carrying Payload PAYLOAD E143816 Payload is the combined weight of cargo and passengers that your vehicle is carrying. The maximum payload for your vehicle appears on the Tire and Loading label. The label is either on the B-pillar or the edge of the driver door. Vehicles exported outside the US and Canada may not have a tire and loading label. Look for “The combined weight of occupants and cargo should never exceed XXX kg OR XXX lb” for maximum payload.
Load Carrying GAWR (Gross Axle Weight Rating) GAWR is the maximum allowable weight that a single axle (front or rear) can carry. These numbers are on the Safety Compliance Certification label. The label is located on the door hinge pillar, door-latch post, or the door edge that meets the door-latch post, next to the driver seating position. The total load on each axle must never exceed its Gross Axle Weight Rating.
Load Carrying The gross combined weight must never exceed the Gross Combined Weight Rating. Note: For trailer towing information refer to the RV and Trailer Towing Guide available at an authorized dealer. WARNINGS Do not exceed the GVWR or the GAWR specified on the Safety Compliance Certification label. Do not use replacement tires with lower load carrying capacities than the original tires because they may lower your vehicle’s GVWR and GAWR limitations.
Load Carrying 1400 - 1100 - 150 = 150 pounds. Yes, you have enough load capacity in your vehicle to transport four friends and your golf bags. In metric units, the calculation would be: 635 kilograms - (5 x 99 kilograms) - (5 x 13.5 kilograms) = 635 495 - 67.5 = 72.5 kilograms. Suppose your vehicle has a 1400-pound (635-kilogram) cargo and luggage capacity.
Towing TOWING A TRAILER WARNINGS Towing trailers beyond the maximum recommended gross trailer weight exceeds the limit of your vehicle and could result in engine damage, transmission damage, structural damage, loss of vehicle control, vehicle rollover and personal injury. Do not exceed the GVWR or the GAWR specified on the certification label. Note: See Recommended Towing Weights (page 243). Your vehicle may have electrical items, such as fuses or relays, related to towing. See Fuses (page 268).
Towing RV & Trailer Towing Guide Online Website http://www.fleet.ford.com/towing-guides/ TRAILER SWAY CONTROL (If Equipped) WARNING Turning off trailer sway control increases the risk of loss of vehicle control, serious injury or death. Ford does not recommend disabling this feature except in situations where speed reduction may be detrimental (such as hill climbing), the driver has significant trailer towing experience, and can control trailer sway and maintain safe operation.
Towing Note: Certain states require electric trailer brakes for trailers over a specified weight. Be sure to check state regulations for this specified weight. The maximum trailer weights listed may be limited to this specified weight, as the vehicle’s electrical system may not include the wiring connector needed to activate electric trailer brakes.
Towing Powertrain Maximum GCWR Maximum trailer weight 3 7400 lb (3357 kg) 3000 lb (1361 kg) 3 7420 lb (3366 kg) 3000 lb (1361 kg) 2.0L GTDI AWD 2.3L GTDI AWD 1 Calculated with SAE J2807 method. 2 Without trailer towing package. 3 With trailer towing package.
Towing ESSENTIAL TOWING CHECKS Follow these guidelines for safe towing: • Do not tow a trailer until you drive your vehicle at least 1,000 mi (1,600 km). • Consult your local motor vehicle laws for towing a trailer. • See the instructions included with towing accessories for the proper installation and adjustment specifications. • Service your vehicle more frequently if you tow a trailer. See your scheduled maintenance information.
Towing Trailer lamps are required on most towed vehicles. Make sure all running lights, brake lights, turn signals and hazard lights are working. Before Towing a Trailer Practice turning, stopping and backing up to get the feel of your vehicle-trailer combination before starting on a trip. When turning, make wider turns so the trailer wheels clear curbs and other obstacles. • • • When Towing a Trailer • • • • Do not drive faster than 70 mph (113 km/h) during the first 500 mi (800 km).
Towing Replace the rear axle lubricant anytime you submerge the rear axle in water. Water may contaminate the rear axle lubricant, which is not a normal maintenance inspection item unless there is a possibility of a leak or other axle repair is required. TOWING THE VEHICLE ON FOUR WHEELS Emergency Towing WARNING If your vehicle has a steering wheel lock make sure the ignition is in the accessory or on position when being towed.
Towing Front-wheel drive vehicles CANNOT be flat-towed (all wheels on the ground) as vehicle or transmission damage may occur. You must place the front wheels on a two-wheel tow dolly. If you are using a tow dolly, follow the instructions specified by the equipment provider. All-wheel drive vehicles CANNOT be flat-towed (all wheels on the ground), as vehicle or transmission damage may occur.
Driving Hints BREAKING-IN • You need to break in new tires for approximately 300 mi (480 km). During this time, your vehicle may exhibit some unusual driving characteristics. • Avoid driving too fast during the first 1,000 mi (1,600 km). Vary your speed frequently and change up through the gears early. Do not labor the engine. • Do not tow during the first 1,000 mi (1,600 km).
Driving Hints • • • • Driving on flat terrain offers improved fuel economy as compared to driving on hilly terrain. Transmissions give their best fuel economy when operated in the top cruise gear and with steady pressure on the gas pedal. Four-wheel-drive operation (if equipped) is less fuel efficient than two-wheel-drive operation. Close the windows for high-speed driving. Before driving through standing water, check the depth.
Driving Hints WARNINGS Do not place additional floor mats or any other covering on top of the original floor mats. This could result in the floor mat interfering with the operation of the pedals. Failure to follow this instruction could result in the loss of control of your vehicle, personal injury or death. To install the floor mats, position the floor mat eyelet over the retention post and press down to lock in position. To remove the floor mat, reverse the installation procedure.
Roadside Emergencies ROADSIDE ASSISTANCE • Vehicles Sold in the United States: Getting Roadside Assistance To fully assist you should you have a vehicle concern, Lincoln Motor Company offers a complimentary roadside assistance program. This program is separate from the New Vehicle Limited Warranty. The service is available: • Throughout the life of the vehicle for original owners. • For six years or 70,000 mi (110,000 km) (whichever comes first) for subsequent owners.
Roadside Emergencies If you need to arrange roadside assistance for yourself, Lincoln Motor Company reimburses a reasonable amount for towing to the nearest Lincoln dealership within 100 mi (160 km). To obtain reimbursement information, United States clients, call 1-800-521-4140. Clients need to submit their original receipts. Vehicles Sold in Canada: Getting Roadside Assistance To fully assist you should you have a vehicle concern, Lincoln Motor Company offers a complimentary roadside assistance program.
Roadside Emergencies Note: When you try to restart your vehicle after a fuel shutoff, the vehicle makes sure that various systems are safe to restart. Once the vehicle determines the systems are safe, then the vehicle allows you to restart. Note: In the event that your vehicle does not restart after your third attempt, contact a qualified technician. The fuel pump shutoff stops the flow of fuel to the engine in the event of a moderate to severe crash. Not every impact causes a shutoff.
Roadside Emergencies Note: Do not disconnect the battery of the disabled vehicle as this could damage the vehicle's electrical system.
Roadside Emergencies To Connect the Booster Cables A Flat battery vehicle. B Booster battery vehicle. C Positive connection cable. D Negative connection cable. WARNING A Make sure that the cables are clear of any moving parts and fuel delivery system parts. E152134 C Park the booster vehicle close to the hood of the disabled vehicle, making sure the two vehicles do not touch. D B 1. Switch off the engine and any electrical equipment. 2.
Roadside Emergencies WARNINGS Make sure that the cables are clear of any moving parts and fuel delivery system parts. To Start the Engine 1. Start the engine of the booster vehicle and rev the engine moderately, or press the accelerator gently to keep your engine speed between 2000 and 3000 RPM, as shown in your tachometer. 2. Start the engine of the disabled vehicle. 3.
Roadside Emergencies If you need to tow your vehicle, contact a professional towing service or, if you are a member of a roadside assistance program, your roadside assistance service provider. We recommend the use of a wheel lift and dollies or flatbed equipment to tow your vehicle. Do not tow with a slingbelt. Lincoln Motor Company does not approve a slingbelt towing procedure. If you tow your vehicle incorrectly, or by any other means, vehicle damage may occur.
Customer Assistance GETTING THE SERVICES YOU NEED Warranty repairs to your vehicle must be performed by an authorized dealer. While any authorized dealer handling your vehicle line provides warranty service, we recommend you return to your selling authorized dealer who wants to ensure your continued satisfaction. Please note that certain warranty repairs require special training and equipment, so not all authorized dealers are authorized to perform all warranty repairs.
Customer Assistance Web Address www.LincolnCanada.com Online Resources Twitter English @LincolnMotorCA Twitter French @LincolnQC Instagram @LincolnMotorCA Facebook /LincolnMotorCA Additional Assistance If you have questions or concerns, or are unsatisfied with the service you are receiving, follow these steps: 1. Contact your Sales Representative or Service Advisor at your selling or servicing authorized dealer. 2.
Customer Assistance vehicle and reimburse the buyer in an amount equal to the actual price paid or payable by the consumer (less a reasonable allowance for consumer use). The consumer has the right to choose whether to receive a refund or replacement vehicle. California Civil Code Section 1793.
Customer Assistance Disputes submitted to the BBB AUTO LINE program are usually decided within forty days after you file your claim with the BBB. You are not bound by the decision, and may reject the decision and proceed to court where all findings of the BBB Auto Line dispute, and decision, are admissible in the court action. Should you choose to accept the BBB AUTO LINE decision, Ford is then bound by the decision, and must comply with the decision within 30 days of receipt of your acceptance letter.
Customer Assistance In the CAMVAP program, impartial third-party arbitrators conduct hearings at mutually convenient times and places in an informal environment. These impartial arbitrators review the positions of the parties, make decisions and, when appropriate, render awards to resolve disputes. CAMVAP decisions are fast, fair, and final as the arbitrator’s award is binding on both you and Ford of Canada. CAMVAP services are available in all Canadian territories and provinces.
Customer Assistance Customer Relationship Center Phone Fax E-mail Asia Pacific N/A N/A apemcrc@ford.com Caribbean and Central America +1 313 594 4857 - expcac@ford.com 971 4 3327 266 menacac@ford.com Ford 80004443673 Lincoln 80004441066 Middle East UAE 80004441066 Saudi Arabia 8008443673 Mobily and Zain cell phone users in Saudi 800850078 North Africa N/A N/A nafcrc@ford.com Puerto Rico and U.S. Virgin Islands +1-800-841-3673 N/A prcac@ford.
Customer Assistance If you buy your vehicle in North America and then relocate to any of the above locations, register your vehicle identification number (VIN) and new address with Ford Global Trade Services by emailing, expcso@ford.com. HELM, INCORPORATED 47911 Halyard Drive Plymouth, Michigan 48170 Attention: Customer Service If you are in another foreign country, contact the nearest authorized dealer.
Customer Assistance To contact NHTSA, you may call the Vehicle Safety Hotline toll-free at 1-888-327-4236 (TTY: 1-800-424-9153); go to http://www.safercar.gov; or write to: Administrator 1200 New Jersey Avenue, Southeast Washington, D.C. 20590 You can also obtain other information about motor vehicle safety from http://www.safercar.gov.
Fuses FUSE SPECIFICATION CHART Power Distribution Box WARNINGS Always disconnect the battery before servicing high current fuses. Pre-Fuse Box The pre-fuse box is in the engine compartment attached to the positive battery post. This box contains several high current fuses. If you need to replace one of these high current fuses, see an authorized dealer. To reduce risk of electrical shock, always replace the cover to the power distribution box before reconnecting the battery or refilling fluid reservoirs.
Fuses E157389 269 MKC (TME) Canada/United States of America, JJ7J 19A321 AA enUSA, Edition date: 201707, Second Printing
Fuses Fuse Number F7 F8 F9 F10 F11 F12 F13 F14 F15 F16 F17 Fuse Rating Protected Components 1 Anti-lock brake system module. 1 Anti-lock brake system module. 1 Fuel pump relay. 1 Blower motor relay. 1 Run start relay. 1 Powertrain control module relay. 1 Starter relay. 1 Memory seat. 1 Wipers and washers relay. 1 Cooling fan. 1 Cooling fan 1 (600W). 1 Cooling fan 1 (750W).
Fuses Fuse Number F18 Fuse Rating 40A 50A F19 F20 F21 F22 F23 F24 F25 F26 F27 F28 5A 10A 10A 10A 1 Cooling fan 2 (750W). Anti-lock brake system module run/start. Horn relay. 2 Brake pedal switch. 2 Windshield wipers and washer. Run/start relay coil. 2 2 Transmission range control module. 2 Air conditioning clutch. 20A 5A Cooling fan 2 (600W). 2 25A 10A 1 2 20A 5A Protected Components Powertrain control module relay coil. 2 2 Washer pump relay. 2 Alternator sensor.
Fuses Fuse Number F29 F30 F31 F32 F33 F34 F35 Fuse Rating 15A 20A 20A 15A 15A 15A 15A F36 — F37 — F38 15A Protected Components Rain sensor. Rear wiper. Rear washer pump relay coil. 2 2 Left-hand headlamp. 2 Right-hand headlamp. 2 Vehicle power 1 (powertrain control module). Vehicle power 2 (canister vent solenoid, universal exhausted gas oxygen sensor, variable camshaft timing, catalyst monitor sensor, canister purge solenoid).
Fuses Fuse Number F39 F40 F41 F42 Fuse Rating 5A Protected Components Powertrain control ignition start power - run. 2 10A 10A 2 Electronic power assist steering run/start. 2 Extended power module run/start. Adaptive cruise control. Blind spot information system. Heads-up display. Rear video camera. (vehicles with stop/start) 2 10A Not used (spare). (vehicles without stop/start) F43 F44 F45 F46 — 5A 5A Not used. Heated rear window relay coil. Heated wiper park.
Fuses Fuse Number Fuse Rating F47 30A F48 Protected Components Electronic transmission pump B+ feed (vehicles equipped with stop/start). 2 — Not used. 1 J-case 2 Mini fuse. fuse. Relay Circuits switched R1 Run start. R2 Horn. R3 Fuel pump. R4 Rear window washer pump. R5 Cooling fan relay 3 (750W). Spare (600W). R6 Windshield wipers. R7 Cooling fan relay 1 (600W). Cooling fan relay 5 (750W). R8 Starter.
Fuses Relay Circuits switched R9 Not used. R10 Cooling fan relay 4 (750W). Spare (600W). R11 Air conditioning clutch. R12 Cooling fan relay 1 (750W). Cooling fan relay 3 (600W). R13 Cooling fan relay 2. R14 Powertrain control module. R15 Heated rear window. Heated wiper park. R16 Blower motor. Passenger Compartment Fuse Box The fuse panel is behind the lower end of the glove box.
Fuses E145984 Fuse Number 1 2 3 Fuse Rating 10A 7.5A 20A Protected Components 1 Demand lighting. 1 Memory seats. 1 Driver door unlock.
Fuses Fuse Number Fuse Rating 4 — 5 Protected Components Not used (spare). Subwoofer amplifier. THX amplifier. 1 20A 6 — Not used (spare). 7 — Not used (spare). 8 — Not used (spare). 9 — 10 11 12 13 14 15 5A 5A Not used (spare). 7.5A 10A Not used (spare). 2 7.5A 10A Keypad. Power liftgate logic. 2 Climate control. Gear shift module. 2 Cluster. Datalink module logic. Steering column module logic.
Fuses Fuse Number Fuse Rating 16 — 17 5A Protected Components Not used (spare). Cellphone passport module. 2 18 — Not used (spare). 19 — Not used (spare). 20 — Not used (spare). 21 22 23 24 25 26 27 28 5A Humidity and in-car temperature. 2 — 10A 30A 30A 30A 30A 20A Not used (spare). Delayed accessory (driver window switch, moonroof logic, power inverter logic). 1 1 Central lock and unlock. 1 Driver door (window, mirror). 1 Front passenger door (window, mirror). 1 Moonroof.
Fuses Fuse Number 29 30 31 32 33 34 35 36 37 38 1 Micro 2 Dual Fuse Rating 30A 30A Protected Components 1 Rear driver side door (window). 1 Rear passenger side door (window). — 10A 20A 30A Not used (spare). Display. Radio frequency receiver. Voice control. 1 1 Radio and active noise control. 1 Run/start bus (fuse #19, 20, 21, 22, 35, 36, 37, circuit breaker). — 15A 20A Not used (spare). Auto-dimming rear view mirror. Continuous control damping suspension. Lane keeping system module.
Fuses Rear Cargo Fuse Box The fuse panel is in the cargo area on the passenger side. Open the fuse panel cover to gain access to the fuses.
Fuses Fuse Number Fuse Rating F1 — Not used. F2 — Not used. F3 5A Protected Components Not used (spare). 1 F4 — Not used. F5 — Not used. F6 — F7 F8 F9 F10 F11 F12 F13 30A 30A 20A 40A 30A 20A Not used. Rear heated seats. 2 Power cinch latch. Power liftgate. 2 2 Heated front seats. 2 Trailer tow. 2 Climate control seats. 2 Not used (spare). — Not used.
Fuses Fuse Number Fuse Rating F14 30A F15 20A F16 20A F17 20A F19 2 Dual 2 Power seats. 2 Auxiliary power point - inside of floor console. 2 Auxiliary power point - rear of floor console. — F18 1 Micro Protected Components 40A Not used. 2 Auxiliary power point - cargo area. 2 Inverter power outlet. fuse. micro fuse. Relay R1 Circuits switched Not used.
Fuses If electrical components in the vehicle are not working, a fuse may have blown. Blown fuses are identified by a broken wire within the fuse. Check the appropriate fuses before replacing any electrical components. CHANGING A FUSE Fuses WARNING Always replace a fuse with one that has the specified amperage rating. Using a fuse with a higher amperage rating can cause severe wire damage and could start a fire.
Fuses Fuse Types E207206 Callout Fuse Type A Micro 2 B Micro 3 C Maxi 284 MKC (TME) Canada/United States of America, JJ7J 19A321 AA enUSA, Edition date: 201707, Second Printing
Fuses Callout Fuse Type D Mini E M Case F J Case G J Case Low Profile 285 MKC (TME) Canada/United States of America, JJ7J 19A321 AA enUSA, Edition date: 201707, Second Printing
Maintenance GENERAL INFORMATION Have your vehicle serviced regularly to help maintain its roadworthiness and resale value. There is a large network of authorized dealers that are there to help you with their professional servicing expertise. We believe that their specially trained technicians are best qualified to service your vehicle properly and expertly. They are supported by a wide range of highly specialized tools developed specifically for servicing your vehicle.
Maintenance 2. Go to the front of your vehicle and release the auxiliary latch. 3. Lift the hood until the lift cylinders hold it open. 4. To close the hood, lower the hood and apply closing force as it drops the last 8 to 11 inches (20 to 30 centimeters).
Maintenance E260253 288 MKC (TME) Canada/United States of America, JJ7J 19A321 AA enUSA, Edition date: 201707, Second Printing
Maintenance A Engine coolant reservoir. See Engine Coolant Check (page 291). B Engine oil dipstick. See Engine Oil Dipstick (page 289). C Engine oil filler cap. See Engine Oil Check (page 289). D Brake fluid reservoir. See Brake Fluid Check (page 295). E Battery. See Changing the 12V Battery (page 296). F Power distribution box. See Fuses (page 268). G Air filter assembly. See Changing the Engine Air Filter (page 303). H Windshield washer fluid reservoir. See Washer Fluid Check (page 295).
Maintenance 9. If the oil level is correct, replace the dipstick and make sure it is fully seated. Note: Do not remove the dipstick when the engine is running. Note: If the oil level is between the maximum and minimum marks, the oil level is acceptable. Do not add oil. Note: The oil consumption of new engines reaches its normal level after approximately 3,000 mi (5,000 km). Adding Engine Oil WARNINGS Do not add engine oil when the engine is hot.
Maintenance From the main menu scroll to: Message Settings Message If the instrument cluster displays one of the following messages, repeat the process. Action and description Press the right arrow button, then from this menu scroll to the following message. Vehicle Press the right arrow button, then from this menu scroll to the following message. Oil Life Press the right arrow button, then from this menu scroll to the following message.
Maintenance Note: During normal vehicle operation, the engine coolant may change color from orange to pink or light red. As long as the engine coolant is clear and uncontaminated, this color change does not indicate the engine coolant has degraded nor does it require the engine coolant to be drained, the system to be flushed, or the engine coolant to be replaced. When the engine is cold, check the concentration and level of the engine coolant at the intervals listed in the scheduled maintenance information.
Maintenance • • Do not use alcohol, methanol, brine or any engine coolants mixed with alcohol or methanol antifreeze (coolant). Alcohol and other liquids can cause engine damage from overheating or freezing. Do not add extra inhibitors or additives to the coolant. These can be harmful and compromise the corrosion protection of the engine coolant. Unscrew the cap slowly. Any pressure will escape as you unscrew the cap. Add prediluted engine coolant meeting the Ford specification.
Maintenance How Fail-Safe Cooling Works If the engine begins to overheat, the engine coolant temperature gauge will move to the red (hot) area and: A high engine temperature message will appear in the information display. The service engine soon indicator will light. If the engine reaches a preset over-temperature condition, the engine will automatically switch to alternating cylinder operation. Each disabled cylinder acts as an air pump and cools the engine. When this occurs the vehicle will still operate.
Maintenance AUTOMATIC TRANSMISSION FLUID CHECK The automatic transmission does not have a transmission fluid dipstick. The automatic transmission does not consume fluid. However, the fluid level should be checked if the transmission is not working properly, for example if the transmission slips or shifts slowly or if you notice some sign of fluid leakage. Note: Transmission fluid should be checked by an authorized dealer. If required, fluid should be added by an authorized dealer.
Maintenance State or local regulations on volatile organic compounds may restrict the use of methanol, a common windshield washer antifreeze additive. Washer fluids containing non-methanol antifreeze agents should be used only if they provide cold weather protection without damaging the vehicle’s paint finish, wiper blades or washer system. FUEL FILTER Your vehicle is equipped with a lifetime fuel filter that is integrated with the fuel tank. Regular maintenance or replacement is not needed.
Maintenance If you see any corrosion on the battery or terminals, remove the cables from the terminals and clean with a wire brush. You can neutralize the acid with a solution of baking soda and water. Because your vehicle’s engine is electronically-controlled by a computer, some engine control settings are maintained by power from the battery. Some engine computer settings, like the idle trim and fuel trim strategy, optimize the driveability and performance of the engine.
Maintenance Run the tip of your fingers over the edge of the blade to check for roughness. Clean the wiper blades with washer fluid or water applied with a soft sponge or cloth. CHANGING THE WIPER BLADES You can improve poor wiper quality by cleaning the wiper blades and the windshield. Replace the wiper blades at least annually for optimum performance. Front Wiper Blades 1. Lift the wiper arm and then press the wiper blade locking buttons together.
Maintenance Note: Make sure that the wiper blade locks into place. ADJUSTING THE HEADLAMPS Vertical Aim Adjustment The assembly plant properly aims the headlamps on your vehicle. If your vehicle has been in an accident, have the alignment of your headlamps checked by your authorized dealer. C 25 feet (7.6 meters) D Horizontal reference line 1. Park the vehicle directly in front of a wall or screen on a level surface, approximately 25 ft (7.6 m) away. 2.
Maintenance REMOVING A HEADLAMP Front Direction Indicator To gain access to the headlamp securing bolts and to remove the headlamp assembly, you must first remove the front fascia and front bumper assemblies. We recommend you see an authorized dealer. CHANGING A BULB E171165 5. Locate the vertical adjuster on each headlamp. Turn the adjuster either clockwise or counterclockwise in order to aim the headlamp. 6. Close the hood and switch off the lamps.
Maintenance • • • • Brake and rear lamps. Rear direction indicators. Reversing lamps. Central high mounted brake lamp. License Plate Lamp 3. Turn the bulb holder counterclockwise and remove it. 4. Remove the bulb by pulling it straight out. 2 BULB SPECIFICATION CHART 1 3 E72789 1. Use a suitable tool, for example a screwdriver, to carefully remove the lamp. 2. Remove the lamp. Function The specified replacement bulbs are in the chart below. Headlamp bulbs must be marked with an authorized D.O.T.
Maintenance Function Trade number Welcome light LED Approach lamp LED * Tail/brake lamp LED * Turn lamp - rear LED * Backup lamp LED License plate lamp W5W * High-mount brake lamp LED * Interior lamps LED * To replace these lamps, see your authorized dealer. To replace instrument panel lights, see your authorized dealer.
Maintenance CHANGING THE ENGINE AIR FILTER WARNING Note: Failure to use the correct air filter element may result in severe engine damage. The customer warranty may be void for any damage to the engine if the correct air filter element is not used. To reduce the risk of vehicle damage and personal burn injuries, do not start your engine with the air cleaner removed and do not remove it while the engine is running.
Maintenance 4. Install the new air filter element. Slide the open end of the air filter element in first, below the tab. Then push the closed end of the air filter into the bottom of the tray. The closed end should fit inside the groove in the tray. The tab of the closed end of the air filter should be oriented down and fit between the forks on the tray as shown at the arrow above. Note: Make sure you align the tab in the air filter element with the fork in the air cleaner assembly tray. 5.
Vehicle Care GENERAL INFORMATION CLEANING PRODUCTS Your dealer has many quality products available to clean your vehicle and protect its finishes. Materials For best results, use the following products or products of equivalent quality: Name Specification Motorcraft® Bug and Tar Remover, ZC-42 (U.S. & Canada) Motorcraft® Custom Bright Metal Cleaner, ZC-15 (U.S. & Canada) ESR-M5B194-B Motorcraft® Detail Wash, ZC-3-A (U.S. & Canada) ESR-M14P4-A Motorcraft® Engine Shampoo and Degreaser, ZC-20 (U.S.
Vehicle Care Name Specification Motorcraft® Spot and Stain Remover, ZC-14 (U.S.) Motorcraft® Ultra-Clear Spray Glass Cleaner, ZC-23 (U.S.) ESR-M14P5-A Motorcraft® Wheel and Tire Cleaner, ZC-37-A (U.S. & Canada) • CLEANING THE EXTERIOR Wash your vehicle regularly with cool or lukewarm water and a neutral pH shampoo, we recommend Motorcraft Detail Wash. • • • Never use strong household detergents or soap, for example dish washing or laundry liquid.
Vehicle Care Exterior Chrome Parts Stripes or Graphics (If Equipped) Under Hood • Hand washing your vehicle is preferred however, pressure washing may be used under the following conditions: For removing black rubber marks from under the hood we recommend Motorcraft Wheel and Tire Cleaner or Motorcraft Bug and Tar Remover. • • Apply a high quality-cleaning product to bumpers and other chrome parts. Follow the manufacturer’s instructions. We recommend Motorcraft Custom Bright Metal Cleaner.
Vehicle Care • • • Do not allow wax to come in contact with any non-body (low-gloss black) colored trim. The wax will discolor or stain the parts over time. • Roof racks. • Bumpers. • Grained door handles. • Side moldings. • Mirror housings. • Windshield cowl area. Do not apply wax to glass areas. After waxing, your car's paint should feel smooth, and be free of streaks and smudges.
Vehicle Care Note: Do not use razor blades or other sharp objects to clean or remove decals from the inside of the heated rear window. The vehicle warranty does not cover damage caused to the heated rear window grid lines. CLEANING THE INTERIOR WARNINGS Do not use cleaning solvents, bleach or dye on the vehicle's seatbelts, as these actions may weaken the belt webbing. On vehicles equipped with seat-mounted airbags, do not use chemical solvents or strong detergents.
Vehicle Care Type of Stain Cleaning Procedure Fruit juice, jam, jelly, syrup or ketchup. Use lukewarm water and rinse by dabbing with clean water. Blood, egg, excrement or urine. Use cold water and rinse by dabbing with clean water. Avoid warm water because it makes these substances coagulate. Liquor, alcoholic beverages, wine, beer, cola and tea. Use lukewarm water. If the color remains, treat with lemon juice and then rinse.
Vehicle Care CLEANING THE INSTRUMENT PANEL AND INSTRUMENT CLUSTER LENS • WARNING • Do not use chemical solvents or strong detergents when cleaning the steering wheel or instrument panel to avoid contamination of the airbag system. • Note: Follow the same procedure as cleaning leather seats for cleaning leather instrument panels and leather interior trim surfaces. See Cleaning Leather Seats (page 311).
Vehicle Care For routine cleaning, wipe the surface with a soft, damp cloth and a mild soap and water solution. Dry the area with a clean, soft cloth. REPAIRING MINOR PAINT DAMAGE Note: Test any cleaner or stain remover on an inconspicuous area. Authorized dealers have touch-up paint to match your vehicle’s color. Your vehicle color code is printed on a sticker on the front, left-hand side door jamb. Take your color code to your authorized dealer to make sure you get the correct color.
Vehicle Care VEHICLE STORAGE If you plan on storing your vehicle for 30 days or more, read the following maintenance recommendations to make sure your vehicle stays in good operating condition. We engineer and test all motor vehicles and their components for reliable, regular driving. Under various conditions, long-term storage may lead to degraded engine performance or failure unless you use specific precautions to preserve engine components. General • • • Store all vehicles in a dry, ventilated place.
Vehicle Care Cooling system Miscellaneous • • • Protect against freezing temperatures. When removing your vehicle from storage, check coolant fluid level. Confirm that there are no cooling system leaks and that fluid is at the recommended level. • • Make sure all linkages, cables, levers and pins under your vehicle are covered with grease to prevent rust. Move vehicles at least 25 ft (7.5 m) every 15 days to lubricate working parts and prevent corrosion.
Wheels and Tires GENERAL INFORMATION Use only approved wheels and tire sizes, using other sizes could damage your vehicle. The recommended tire inflation pressures are found on the Tire Label which is located on the B-pillar or the edge of the driver door. This information can also be found on the Safety Compliance Certification Label, affixed to either the door hinge pillar, door-latch post, or the door edge that meets the door-latch post; next to the driver’s seating position.
Wheels and Tires All-wheel drive system (if equipped) WARNING Do not become overconfident in the ability of four-wheel drive vehicles. Although a four-wheel drive vehicle may accelerate better than a two-wheel drive vehicle in low traction situations, it won't stop any faster than two-wheel drive vehicles. Always drive at a safe speed. E145298 Utility vehicles and trucks handle differently than passenger cars in the various driving conditions that are encountered on streets, highways and off-road.
Wheels and Tires • • • Higher - to allow higher load carrying capacity and to allow it to travel over rough terrain without getting hung up or damaging underbody components. Shorter - to give it the capability to approach inclines and drive over the crest of a hill without getting hung up or damaging underbody components. All other things held equal, a shorter wheelbase may make your vehicle quicker to respond to steering inputs than a vehicle with a longer wheelbase.
Wheels and Tires As a result of the above dimensional differences, Sport utility vehicles and trucks often have a higher center of gravity and a greater difference in center of gravity between the loaded and unloaded condition. These differences that make your vehicle so versatile also make it handle differently than an ordinary passenger car. TIRE CARE Information About Uniform Tire Quality Grading E142542 Tire Quality Grades apply to new pneumatic passenger car tires.
Wheels and Tires The traction grades, from highest to lowest are AA, A, B, and C. The grades represent the tire’s ability to stop on wet pavement as measured under controlled conditions on specified government test surfaces of asphalt and concrete. A tire marked C may have poor traction performance. Temperature A B C WARNING The temperature grade for this tire is established for a tire that is properly inflated and not overloaded.
Wheels and Tires *Recommended inflation pressure: The cold inflation pressure found on the Safety Compliance Certification Label (affixed to either the door hinge pillar, door-latch post, or the door edge that meets the door-latch post, next to the driver's seating position), or Tire Label located on the B-Pillar or the edge of the driver door. * B-pillar: The structural member at the side of the vehicle behind the front door. *Bead area of the tire: Area of the tire next to the rim.
Wheels and Tires A. P: Indicates a tire, designated by the Tire and Rim Association, that may be used for service on cars, sport utility vehicles, minivans and light trucks. Note: If your tire size does not begin with a letter this may mean it is designated by either the European Tire and Rim Technical Organization or the Japan Tire Manufacturing Association. B. 215: Indicates the nominal width of the tire in millimeters from sidewall edge to sidewall edge.
Wheels and Tires Letter rating Speed rating W 168 mph (270 km/h) Y 186 mph (299 km/h) Note: For tires with a maximum speed capability over 149 mph (240 km/h), tire manufacturers sometimes use the letters ZR. For those with a maximum speed capability over 186 mph (299 km/h), tire manufacturers always use the letters ZR. H. U.S. DOT Tire Identification Number (TIN): This begins with the letters DOT and indicates that the tire meets all federal standards.
Wheels and Tires *Traction: The traction grades, from highest to lowest are AA, A, B, and C. The grades represent the tire's ability to stop on wet pavement as measured under controlled conditions on specified government test surfaces of asphalt and concrete. A tire marked C may have poor traction performance.
Wheels and Tires B. Load Range and Load Inflation Limits: Indicates the tire's load-carrying capabilities and its inflation limits. C. Maximum Load Dual lb (kg) at psi (kPa) cold: Indicates the maximum load and tire pressure when the tire is used as a dual, defined as four tires on the rear axle (a total of six or more tires on the vehicle). D.
Wheels and Tires Location of the Tire Label You will find a Tire Label containing tire inflation pressure by tire size and other important information located on the B-Pillar or the edge of the driver door. Inflating Your Tires Safe operation of your vehicle requires that your tires are properly inflated. Remember that a tire can lose up to half of its air pressure without appearing flat. Every day before you drive, check your tires.
Wheels and Tires that meets the door-latch post, next to the driver's seating position), or Tire Label which is located on the B-Pillar or the edge of the driver’s door. The cold inflation pressure should never be set lower than the recommended pressure on the Safety Compliance Certification Label or Tire Label. When weather temperature changes occur, tire inflation pressures also change. A 11°F (6°C) temperature drop can cause a corresponding drop of 1 psi (7 kPa) in inflation pressure.
Wheels and Tires 7. Check the sidewalls to make sure there are no gouges, cuts or bulges. Inspecting Your Tires and Wheel Valve Stems Periodically inspect the tire treads for uneven or excessive wear and remove objects such as stones, nails or glass that may be wedged in the tread grooves. Check the tire and valve stems for holes, cracks, or cuts that may permit air leakage and repair or replace the tire and replace the valve stem.
Wheels and Tires Age U.S. DOT Tire Identification Number Tire Replacement Requirements WARNING Tires degrade over time depending on many factors such as weather, storage conditions, and conditions of use (load, speed, inflation pressure) the tires experience throughout their lives. Both United States and Canada Federal regulations require tire manufacturers to place standardized information on the sidewall of all tires.
Wheels and Tires WARNINGS The use of non-recommended tires and wheels could cause steering, suspension, axle, transfer case or power transfer unit failure. If you have questions regarding tire replacement, contact your authorized dealer as soon as possible. To reduce the risk of serious injury, when mounting replacement tires and wheels, you should not exceed the maximum pressure indicated on the sidewall of the tire to set the beads without additional precautions listed below.
Wheels and Tires WARNINGS Do not spin the wheels at over 34 mph (55 km/h). The tires may fail and injure a passenger or bystander. Driving habits have a great deal to do with your tire mileage and safety.
Wheels and Tires Note: Your vehicle may be equipped with a dissimilar spare wheel and tire assembly. A dissimilar spare wheel and tire assembly is defined as a spare wheel and tire assembly that is different in brand, size or appearance from the road tires and wheels. If you have a dissimilar spare wheel and tire assembly, it is intended for temporary use only and should not be used in a tire rotation.
Wheels and Tires The tires on your vehicle have all-weather treads to provide traction in rain and snow. However, in some climates, you may need to use snow tires and cables. If you need to use cables, it is recommended that steel wheels (of the same size and specifications) be used, as cables may chip aluminum wheels.
Wheels and Tires Each tire, including the spare (if provided), should be checked monthly when cold and inflated to the inflation pressure recommended by the vehicle manufacturer on the vehicle placard or tire inflation pressure label. (If your vehicle has tires of a different size than the size indicated on the vehicle placard or tire inflation pressure label, you should determine the proper tire inflation pressure for those tires).
Wheels and Tires Changing Tires With a Tire Pressure Monitoring System Check the tire pressure periodically (at least monthly) using an accurate tire gauge. See When Inflating Your Tires in this chapter. Understanding Your Tire Pressure Monitoring System light is illuminated, your tires are under-inflated and need to be inflated to the manufacturer’s recommended tire pressure. Even if the light turns on and a short time later turns off, your tire pressure still needs to be checked.
Wheels and Tires When You Believe Your System is Not Operating Properly The main function of the tire pressure monitoring system is to warn you when your tires need air. It can also warn you in the event the system is no longer capable of functioning as intended.
Wheels and Tires Low tire pressure warning light Possible cause Customer action required Tire(s) under-inflated Make sure tires are at the proper pressure. See Inflating your tires in this chapter. After inflating your tires to the manufacturer’s recommended pressure as shown on the Tire Label (located on the edge of driver’s door or the B-Pillar), the vehicle must be driven for at least two minutes over 20 mph (32 km/h) before the light turns off.
Wheels and Tires When Inflating Your Tires WARNING Do not use the tire pressure displayed in the information display as a tire pressure gauge. Failure to follow this instruction could result in personal injury or death. When putting air into your tires (such as at a gas station or in your garage), the tire pressure monitoring system may not respond immediately to the air added to your tires.
Wheels and Tires If you get a flat tire when driving, do not apply the brake heavily. Instead, gradually decrease your speed. Hold the steering wheel firmly and slowly move to a safe place on the side of the road. Have a flat serviced by an authorized dealer in order to prevent damage to the tire pressure monitoring system sensors. See Tire Pressure Monitoring System (page 332). Replace the spare tire with a road tire as soon as possible.
Wheels and Tires When driving with the full-size dissimilar spare wheel and tire assembly, do not: • Exceed 70 mph (113 km/h). • Use more than one dissimilar spare wheel and tire assembly at a time. • Use commercial car washing equipment. • Use snow chains on the end of the vehicle with the dissimilar spare wheel and tire assembly. The usage of a full-size dissimilar spare wheel and tire assembly can lead to impairment of the following: • Handling, stability and braking performance. • Comfort and noise.
Wheels and Tires Note: Passengers should not remain in your vehicle when the vehicle is being jacked. 1. Park on a level surface, set the parking brake and activate the hazard flashers. 2. Place the transmission in park (P) and turn the engine off. 3. Remove the carpeted wheel cover. 4. Remove the wing nut that secures the spare tire by turning it counterclockwise. E145908 9. Small arrow-shaped marks on the sills show the location of the jacking points. E142551 6. Block the diagonally opposite wheel. 7.
Wheels and Tires Note: If equipped with full wheel covers with exposed wheel nuts, remove the wheel nuts prior to removing the wheel cover or damage to the wheel cover may occur. 11. 12. Replace the flat tire with the spare tire, making sure the valve stem is facing outward. Reinstall the lug nuts until the wheel is snug against the hub. Do not fully tighten the lug nuts until the wheel has been lowered. Lower the wheel by turning the jack handle counterclockwise. 13.
Wheels and Tires E143746 TECHNICAL SPECIFICATIONS Wheel Lug Nut Torque Specifications WARNING When a wheel is installed, always remove any corrosion, dirt or foreign materials present on the mounting surfaces of the wheel or the surface of the wheel hub, brake drum or brake disc that contacts the wheel. Make sure that any fasteners that attach the rotor to the hub are secured so they do not interfere with the mounting surfaces of the wheel.
Wheels and Tires * Bolt size Ib-ft (Nm) M12 x 1.5 100 (135) * Torque specifications are for nut and bolt threads free of dirt and rust. Use only Ford recommended replacement fasteners. Retighten the lug nuts to the specified torque within 100 miles (160 kilometers) after any wheel disturbance (such as tire rotation, changing a flat tire, wheel removal). E145950 A Wheel pilot bore. Inspect the wheel pilot bore and mounting surface prior to installation.
Capacities and Specifications ENGINE SPECIFICATIONS - 2.0L/2.0L ECOBOOST™ Measurement Specification Cubic inches. 122 Firing order. 1-3-4-2 Ignition system. Coil on plug Spark plug gap. 0.027-0.031 in. (0.70-0.80 mm) Compression ratio. 9.7:1 A. The long drivebelt is on the first pulley groove closest to the engine. B. The short drivebelt is on the second pulley groove farthest from the engine.
Capacities and Specifications ENGINE SPECIFICATIONS - 2.3L/2.3L ECOBOOST™ Measurement Specification Cubic inches. 138 Firing order. 1-3-4-2 Compression ratio. 9.5:1 Spark plug gap. 0.027-0.031 in. (0.70-0.80 mm) A. The long drivebelt is on the first pulley groove closest to the engine. B. The short drivebelt is on the second pulley groove farthest from the engine.
Capacities and Specifications MOTORCRAFT PARTS - 2.0L/2.0L ECOBOOST™ Component Motorcraft part number Air filter element FA-1908 Oil filter FL-910-S Battery (without start/stop) BXT-48H6-610 Battery (with start/stop) BAGM-48H6-760 Spark plugs SP-527 Cabin air filter FP70 Windshield wiper blade WW-2550 (driver side) WW-1575 (passenger side) WW-1106 (rear window) We recommend Motorcraft replacement parts available at your Ford dealer or at fordparts.com for scheduled maintenance.
Capacities and Specifications MOTORCRAFT PARTS - 2.3L/2.3L ECOBOOST™ Component Motorcraft part number Air filter element FA-1908 Oil filter FL-910-S Battery BXT-48H6-610 Spark plugs SP-537 Cabin air filter FP70 Windshield wiper blade WW-2550 (driver side) WW-1575 (passenger side) WW-1106 (rear window) We recommend Motorcraft replacement parts available at your Ford dealer or at fordparts.com for scheduled maintenance.
Capacities and Specifications VEHICLE IDENTIFICATION NUMBER VEHICLE CERTIFICATION LABEL The vehicle identification number is located on the left-hand side of the instrument panel. E142477 E142476 Please note that in the graphic, XXXX is representative of your vehicle identification number.
Capacities and Specifications The transmission code is on the Safety Compliance Certification Label. The following table shows the transmission code along with the transmission description.
Capacities and Specifications CAPACITIES AND SPECIFICATIONS - 2.0L ECOBOOST™ Capacities WARNING The air conditioning refrigerant system contains refrigerant under high pressure. Only qualified personnel should service the air conditioning refrigerant system. Opening the air conditioning refrigerant system can cause personal injury. Item Capacity Engine oil (with oil filter). 5.7 qt (5.4 L) Engine coolant. 8.6 qt (8.1 L) Brake fluid.
Capacities and Specifications Item Capacity A/C refrigerant. 24 oz (0.68 kg) A/C refrigerant compressor oil. 1 Approximate 2.7 fl oz (80.32 ml) dry fill capacity. Actual amount may vary during fluid changes. Specifications Materials Name Specification Recommended motor oil (U.S.
Capacities and Specifications Name Specification Engine coolant (Canada): Motorcraft® Orange Prediluted Antifreeze/Coolant CVC-3DIL-B WSS-M97B44-D2 Brake fluid: Motorcraft® DOT 4 LV High Performance Motor Vehicle Brake Fluid PM-20 WSS-M6C65-A2 Rear differential fluid (All Wheel Drive) (U.S.
Capacities and Specifications Name Specification Automatic transmission fluid (Canada): Motorcraft® MERCON® LV Automatic Transmission Fluid CXT-10-LV12 WSS-M2C938-A MERCON® LV Windshield washer fluid (U.S. and Mexico): Motorcraft® Premium Windshield Wash Concentrate with Bitterant ZC-32-B2 WSS-M14P19-A Windshield washer fluid (Canada): Motorcraft® Premium Quality Windshield Washer Fluid CXC-37-(A, B, D, F) WSS-M14P19-A A/C refrigerant (U.S.
Capacities and Specifications Name Specification Multi-purpose grease: Motorcraft® Multi-Purpose Grease Spray XL-5-A ESB-M1C93-B Lock cylinders (U.S.
Capacities and Specifications Do not use supplemental engine oil additives because they are unnecessary and could lead to engine damage that may not be covered by your vehicle warranty. E142732 An oil that displays this symbol conforms to current engine, emission system and fuel economy performance standards of ILSAC. Note: Ford recommends using DOT 4 Low Viscosity (LV) High Performance Brake Fluid or equivalent meeting WSS-M6C65-A2.
Capacities and Specifications E240523 CAPACITIES AND SPECIFICATIONS - 2.3L ECOBOOST™ Capacities WARNING The air conditioning refrigerant system contains refrigerant under high pressure. Only qualified personnel should service the air conditioning refrigerant system. Opening the air conditioning refrigerant system can cause personal injury.
Capacities and Specifications Item Capacity Engine oil (with oil filter). 5.7 qt (5.4 L) Engine coolant. 8.1 qt (7.7 L) Brake fluid. Between MIN/MAX on brake fluid reservoir Rear differential fluid (All Wheel Drive). 2.4 pt (1.15 L) Power Transfer Unit (PTU) fluid (All Wheel Drive). 17.9 fl oz (0.53 L) Automatic transmission fluid. 9.0 qt (8.5 L) 1 Windshield washer fluid. Fill as required Fuel tank. 15.7 gal (59.4 L) A/C refrigerant. 24 oz (0.68 kg) A/C refrigerant compressor oil.
Capacities and Specifications Specifications Materials Name Specification Recommended motor oil (U.S.): Motorcraft® SAE 5W-30 Synthetic Blend Motor Oil XO-5W30-QSP WSS-M2C946-A Recommended motor oil (Canada): Motorcraft® SAE 5W-30 Super Premium Motor Oil CXO-5W30-LSP12 WSS-M2C946-A Recommended motor oil (Mexico): Motorcraft® SAE 5W-30 Synthetic Motor Oil MXO-5W30-QSP WSS-M2C946-A Engine coolant (U.S.
Capacities and Specifications Name Specification Rear differential fluid (All Wheel Drive) (U.S. and Mexico): Motorcraft® SAE 80W-90 Premium Rear Axle Lubricant XY-80W90-QL WSP-M2C197-A Rear differential fluid (All Wheel Drive) (Canada): Motorcraft® SAE 80W-90 Premium Axle Lubricant CXY-80W90-1L WSP-M2C197-A Power Transfer Unit (PTU) fluid (U.S.
Capacities and Specifications Name Specification Windshield washer fluid (Canada): Motorcraft® Premium Quality Windshield Washer Fluid CXC-37-(A, B, D, F) WSS-M14P19-A A/C refrigerant (U.S.
Capacities and Specifications Name Specification Lock cylinders (U.S.): Motorcraft® Penetrating and Lock Lubricant XL-1 - Lock cylinders (Canada): Motorcraft® Penetrating Fluid CXC-51-A - Lock cylinders (Mexico): Motorcraft® Penetrating and Lock Lubricant MXL-1 - If you use oil and fluids that do not meet the defined specification and viscosity grade, this may lead to: • Component damage which is not covered by the vehicle warranty. • Longer engine cranking periods. • Increased emission levels.
Capacities and Specifications An oil that displays this symbol conforms to current engine, emission system and fuel economy performance standards of ILSAC. Do not use supplemental engine oil additives because they are unnecessary and could lead to engine damage that may not be covered by your vehicle warranty. Note: Ford recommends using DOT 4 Low Viscosity (LV) High Performance Brake Fluid or equivalent meeting WSS-M6C65-A2.
Capacities and Specifications E240523 363 MKC (TME) Canada/United States of America, JJ7J 19A321 AA enUSA, Edition date: 201707, Second Printing
Audio System GENERAL INFORMATION Radio Frequencies and Reception Factors AM and FM frequencies are established by the Federal Communications Commission (FCC) and the Canadian Radio and Telecommunications Commission (CRTC). Those frequencies are: • AM: 530-1710 kHz • FM: 87.9-107.9 MHz Note: Listening to loud audio for long periods of time could damage your hearing.
Audio System Do not expose discs to direct sunlight or heat sources for extended periods. • MP3 and WMA Track and Folder Structure Audio systems capable of recognizing and playing MP3 and WMA individual tracks and folder structures work as follows: • There are two different modes for MP3 and WMA disc playback: MP3 and WMA track mode (system default) and MP3 and WMA folder mode. • MP3 and WMA track mode ignores any folder structure on the MP3 and WMA disc.
Audio System Note: Some features, such as satellite radio, may not be available in your location. Check with an authorized dealer.
Audio System A CD slot. Volume and Power B CD eject. C Tune. Turn to adjust the volume. Press to switch the system on and off. D Seek, fast forward and reverse. E Vol and power. Tune In radio mode, turn to search through the radio frequency band. In satellite radio mode, turn to find the previous or next available satellite radio station. Seek, Fast Forward and Reverse In radio mode, select a frequency band and press either button.
SYNC™ 3 GENERAL INFORMATION WARNING Driving while distracted can result in loss of vehicle control, crash and injury. We strongly recommend that you use extreme caution when using any device that may take your focus off the road. Your primary responsibility is the safe operation of your vehicle. We recommend against the use of any hand-held device while driving and encourage the use of voice-operated systems when possible.
SYNC™ 3 E205444 369 MKC (TME) Canada/United States of America, JJ7J 19A321 AA enUSA, Edition date: 201707, Second Printing
SYNC™ 3 Item Menu Item Action and Description A Status Bar This bar displays icons and messages pertaining to current system activities including climate settings, voice commands and phone functions such as text messages. B Home This button is available on the main screens. Pressing it takes you to the home screen view. C Clock This shows the current time. You can set the clock manually or have it controlled by the vehicle's GPS location. See Settings (page 438).
SYNC™ 3 i E249671 371 MKC (TME) Canada/United States of America, JJ7J 19A321 AA enUSA, Edition date: 201707, Second Printing
SYNC™ 3 Callout Item Description A Driver Temperature This shows the temperature the driver selects through the climate control system. B Heated steering wheel When you activate the heated steering wheel option on the touch screen, this icon displays. It only displays when there is not a physical button for the heated steering wheel. (If equipped) C Passenger Temperature When the passenger's temperature has been adjusted and is no longer linked to the driver's temperature, it displays here.
SYNC™ 3 Callout Item Description K 911 Assist Off This icon displays when 911 Assist is set to off and your phone is connected to SYNC. L In-Call This icon displays when a phone call is active. M Bluetooth This icon displays to show an active Bluetooth connection. Messages may also appear in the status bar to provide you with notifications. You can select the message to view the associated feature.
SYNC™ 3 Feature Bar Item Functions Navigation Allows you to see your vehicle's location on a virtual road map, get driving directions to your destination and find points of interest along your route. (If equipped) Apps Connect and control SYNC 3 compatible apps running on your iphone or android device. Also, access built-in additional features such as SiriusXM Traffic and Travel Link (if equipped).
SYNC™ 3 Accessing and Adjusting Modes Through Your Vehicle Information Display (If Equipped) Depending on your vehicle and selected options you may be able to control some of the SYNC 3 features on your information display. The features are visible in the center of the display (A).
SYNC™ 3 E185883 You can make the following adjustments using the information display SYNC 3 screen: 376 MKC (TME) Canada/United States of America, JJ7J 19A321 AA enUSA, Edition date: 201707, Second Printing
SYNC™ 3 Option Audio Information Information for current audio playing. Select source. Navigation View current road and speed limit (if information is available). View current route, next turn, time to your destination (depending on cluster level), distance to destination (depending on cluster level), and ability to cancel route. If you do not have an active navigation route programed, the compass is shown.
SYNC™ 3 Note: If your vehicle is not equipped with navigation, compass appears in the display instead of navigation. If you press the right arrow to go into the compass menu, you can see the compass graphic. The compass displays the direction in which the vehicle is traveling, not true direction (for example, if the vehicle is traveling west, the middle of the compass graphic displays west; north displays to the left of west though its true direction is to the right of west).
SYNC™ 3 • • DISP: Switch the display on or off. You can also touch the screen to switch the display back on. Temperature, fan and climate control buttons: Control the temperature, fan speed or settings of the climate control system. See Climate Control (page 133). 911 Assist WARNINGS Unless the 911 Assist setting is set on before a crash, the system will not dial for help which could delay response time, potentially increasing the risk of serious injury or death after a crash.
SYNC™ 3 To make sure that 911 Assist works correctly: • SYNC must be powered and working properly at the time of the incident and throughout feature activation and use. • The 911 Assist feature must be set on before the incident. • You must pair and connect a Bluetooth-enabled and compatible cell phone to SYNC. • A connected Bluetooth-enabled phone must have the ability to make and maintain an outgoing call at the time of the incident.
SYNC™ 3 of electronically or verbally disclosing to 911 operators your vehicle location or other details about your vehicle or crash to assist 911 operators to provide the most appropriate emergency services. If you do not want to disclose this information, do not switch the feature on. • • Safety Information WARNING Driving while distracted can result in loss of vehicle control, crash and injury.
SYNC™ 3 Restricted features Cellular Phone Pairing a Bluetooth phone. Browsing of list entries is limited for phone contacts and recent phone calls. System Functionality Editing the keypad code. Enabling Valet Mode. Editing settings while the rear view camera or active park assist are active. Wi-Fi Editing Wi-Fi settings. Editing the list of wireless networks. Connecting to a new Wi-Fi network. Text Messages Viewing received text messages. Navigation Using the keyboard to enter a destination.
SYNC™ 3 Website www.syncmaroute.ca Lincoln Connect with Lincoln Way With a Lincoln Connect-equipped vehicle, you can use Lincoln Way® to track your vehicle’s location and remotely access vehicle features such as start, lock and unlock and vehicle status including fuel level and approximate mileage. You can also schedule specific times to remotely start your vehicle so it’s ready to hit the road as soon as you are. Lincoln Way® is available through a free download via the Apple App Store® or Google Play™.
SYNC™ 3 To connect your system to Wi-Fi, select: Menu Item Settings download continues where it left off at the next Wi-Fi connected opportunity. Upon activation of an update, a banner displays on the touchscreen indicating the system update. Select the icon to see more detail. This icon displays for two ignition cycles.
SYNC™ 3 Privacy Information When you connect a cellular phone to SYNC 3, the system creates a profile within your vehicle that links to that cellular phone. This profile helps in offering you more cellular features and operating more efficiently. Among other things, this profile may contain data about your cellular phone book, text messages (read and unread), and call history, including history of calls when your cell phone was not connected to the system.
SYNC™ 3 E205446 Item A Tile Audio Home screen display Shows the active media source.
SYNC™ 3 Item Tile Home screen display If your vehicle does not have navigation, this space contains the compass. B C 1 Phone The name of the connected phone appears on the screen. The status of the phone features also appear. This includes signal strength, battery charge, 911 assist setting state (On or Off), text messaging and roaming. This map displays your current location or current route in real time.
SYNC™ 3 Voice Command Action and Description Main Menu Brings you to the main menu. Go back Returns you to the previous screen. Cancel Ends the voice session. List of Commands Gives you a list of possible voice commands. ___ List of Commands You can name any feature and the system gives a list of commands available for the feature.
SYNC™ 3 Audio Voice Commands ___ is a dynamic listing, meaning that for audio voice commands it can be the name of a Sirius channel or a channel number, a radio frequency number, or the name of an artist, album, song or a genre. To control the media features, press the voice button and when prompted, say: Voice command Sirius Channel ___ Description 1 You can say the Sirius channel name or number such as "Sirius channel 16".
SYNC™ 3 Voice command Description Play Song ___ Play Audiobook ___ Browse ___ 1 This For USB audio only, you can say the name of an artist, album, or a genre to browse by that selection. Your system must finish indexing before this option is available. For example you can say "Browse The Beatles" or "Browse folk". option may not be available in all markets or may require a subscription. Climate Voice Commands You can control the temperature of the vehicle using voice commands.
SYNC™ 3 To pair your phone, press the voice button and when prompted, say: Voice command Pair Phone Description Follow the on-screen instructions to complete the pairing process. See Settings (page 438). Making Calls ___ is a dynamic listing, meaning that for phone voice commands it can be the name of the contact you wish to call or the digits you want to dial.
SYNC™ 3 Once you have provided the digits of the phone number, you can say the following commands: Voice Command Description <0-9> If the full number was not entered with the first command, you can continue saying the number. Dial Tells SYNC 3 to make the phone call. Delete Tells SYNC 3 to erase the last block of digits stated. Clear Tells SYNC 3 to erase the entire number.
SYNC™ 3 Navigation Voice Commands (If Equipped) to set a destination or find a point of interest.
SYNC™ 3 In addition, you can say these commands when a route is active: Voice command Description Cancel Route Cancels the current route. Detour Allows you to select an alternate route. Repeat Instruction Repeats the last guidance prompt. Show Route Displays the active route. Route Summary Displays the list of upcoming maneuvers. Where Am I Provides current location. Zoom in Allows you to zoom in on the map. Zoom out Allows you to zoom out from the map.
SYNC™ 3 Mobile App Voice Commands (If Equipped) The following voice commands are always available: Voice command Description Mobile Apps SYNC 3 will prompt you to say the name of an app to start it on SYNC 3. List Mobile Apps SYNC 3 will list all of the currently available Mobile Apps. Find Mobile Apps SYNC 3 will search and connect to compatible app(s) running on your mobile device.
SYNC™ 3 You can say the following commands to access SiriusXM Traffic and Travel Link: Voice command Description Show Traffic Displays a list of traffic incidents. Show Weather Map Displays the current weather map. Show Fuel Prices Displays a list of fuel prices. Show 5 Day Forecast Displays the 5 day weather forecast.
SYNC™ 3 Voice command Description Call Confirmation Off The system does not confirm before placing a call. Voice Command Lists On The system displays a short list of available commands. Voice Command Lists Off The system does not display the list of commands. You can use the volume control to adjust the volume of the system voice prompts. While prompt is active, adjust the volume control up or down to your desired setting.
SYNC™ 3 E205443 398 MKC (TME) Canada/United States of America, JJ7J 19A321 AA enUSA, Edition date: 201707, Second Printing
SYNC™ 3 Message Message and description A Sources B Direct Tune C Presets You can access these options using the touchscreen or voice commands. Sources Press this button to select the source of media you want to listen to. Menu item AM FM SIRIUS 1 CD 1 USB The name of the USB that is plugged in displays here.
SYNC™ 3 Menu item Bluetooth Stereo Apps 1 This If you have SYNC 3 compatible apps on your connected smart phone, they display here as individual source selections. feature may not be available in all markets and requires an active subscription. Once you have entered the station's call numbers, you can select: AM/FM Radio Tuning a Station You can use the tune or seek controls on the radio bezel to select a station.
SYNC™ 3 SiriusXM satellite radio is a subscription-based satellite radio service that broadcasts a variety of music, sports, news, weather, traffic and entertainment programming. Your factory-installed SiriusXM satellite radio system includes hardware and a limited subscription term that begins on the date of sale or lease of your vehicle. See an authorized dealer for availability.
SYNC™ 3 Menu item Replay Action and description Replay audio on the current channel. You can replay approximately 45 minutes of audio as long as you remain tuned to the current station. Changing stations erases the previous audio. Live ALERT When you are in replay mode, you are not able to select a different preset until you return to live audio. Pressing this button returns you to the live broadcast. Save the current song, artist, or team as a favorite.
SYNC™ 3 SiriusXM Satellite Radio Reception Factors and Troubleshooting Potential reception issues Antenna obstructions For optimal reception performance, keep the antenna clear of snow and ice build-up and keep luggage and other materials as far away from the antenna as possible. Terrain Hills, mountains, tall buildings, bridges, tunnels, freeway overpasses, parking garages, dense tree foliage and thunderstorms can interfere with your reception.
SYNC™ 3 Troubleshooting tips Message Cause Action Unsubscribed Channel Your subscription does not include this channel. Contact SiriusXM at 1-888-539-7474 to subscribe to the channel, or tune to another channel. Satellite acquiring signal… The signal is lost from the SiriusXM satellite or SiriusXM tower to your vehicle antenna. The signal is blocked. When you move into an open area, the signal should return. Updating… Update of channel programming in progress. No action required.
SYNC™ 3 HD Radio technology is the digital evolution of analog AM/FM radio. Your system has a special receiver that allows it to receive digital broadcasts (where available) in addition to the analog broadcasts, it already receives. Digital broadcasts provide a better sound quality than analog broadcasts with free, crystal-clear audio and no static or distortion.
SYNC™ 3 When HD Radio broadcasts are active, you can access the following functions: Message Action and description Presets Allows you to save an active channel as a memory preset. Touch and hold a memory preset slot until the sound returns. There is a brief mute while the radio saves the station. Sound returns when the channel saves. When switching to an HD2 or HD3 memory preset, the sound mutes before the digital audio plays, because the system has to reacquire the digital signal.
SYNC™ 3 In order to provide the best possible experience, use the contact form to report any station issues found while listening to a station broadcasting with HD Radio technology. Independent entities own and operate each station. These stations are responsible for ensuring all audio streams and data fields are accurate. Potential station issues Issues Cause Action Echo, stutter, skip or repeat in audio. This is poor time alignment by the radio broadIncrease or decrease in audio caster. volume.
SYNC™ 3 Website http://hdradio.com/stations/feedback HD Radio Technology manufactured under license from iBiquity Digital Corporation and foreign patents. HD Radio and the HD and HD Radio logos are proprietary trademarks of DTS. Ford Motor Company and DTS are not responsible for the content sent using HD Radio technology. Content may be changed, added or deleted at any time at the station owner's discretion. CD (If equipped) Once you select this option, the system returns you to the main audio screen.
SYNC™ 3 You can use the forward, reverse, pause or play buttons to control the audio playback. Bluetooth Stereo or USB Bluetooth Stereo and USB allow you to access media that you store on your Bluetooth device or USB device such as music, audio books or podcasts.
SYNC™ 3 Button Function Browse If available, displays the list of tracks in the Now Playing playlist. New Search This option, which is available under browse, allows you to play all tracks or to filter the available media into one of the below categories. Play All Playlists Artist Albums Songs Genres Podcasts Audio books Composers A-Z Jump This button allows you to choose a specific letter to view within the category you are browsing.
SYNC™ 3 USB Ports Apps The system supports the use of certain audio apps such as iHeartRadio through a USB or Bluetooth enabled device. Each app gives you different on-screen options depending on the app's content. See Apps (page 435). Supported Media Players, Formats and Metadata Information E211463 The USB ports are in the center console or behind a small access door in the instrument panel.
SYNC™ 3 E224964 412 MKC (TME) Canada/United States of America, JJ7J 19A321 AA enUSA, Edition date: 201707, Second Printing
SYNC™ 3 Callout Item Description A Left-hand front seat temperature: Touch up or down to adjust the temperature. B Heated steering wheel: Touch the heated steering wheel icon to switch the heated steering wheel on and off (if equipped). C Defrost A pop up appears on the screen to display the defrost options. MAX Defrost: Touch the button to maximize defrosting.
SYNC™ 3 Callout Item Description D AUTO Touch the button to switch on automatic operation. Select the desired temperature using the temperature control. The system adjusts fan speed, air distribution, air conditioning operation, and selects outside air or recirculated air to heat or cool the vehicle in order to maintain the desired temperature. E Power Touch the button to switch the system on and off. Switching off the climate control system prevents outside air from entering the vehicle.
SYNC™ 3 Callout J Item Description A/C Touch to switch the air conditioning on or off. Use A/C with recirculated air to improve cooling performance and efficiency. A/C engages automatically in MAX A/C, defrost and footwell/defrost Recirculated air: Touch to switch the recirculated air on or off which may reduce the amount of time needed to cool down the interior and help reduce odors from reaching the interior. Recirculated air also engages automatically when you select MAX A/C.
SYNC™ 3 Pairing Your Cell Phone for the First Time PHONE WARNING Driving while distracted can result in loss of vehicle control, crash and injury. We strongly recommend that you use extreme caution when using any device that may take your focus off the road. Your primary responsibility is the safe operation of your vehicle. We recommend against the use of any hand-held device while driving and encourage the use of voice-operated systems when possible.
SYNC™ 3 At a minimum, most cell phones with Bluetooth wireless technology support the following functions: • Answering an incoming call. • Ending a call. • Dialing a number. • Call waiting notification. • Caller identification. Other features, such as text messaging using Bluetooth and automatic phonebook download, are phone-dependent features. To check your phone’s compatibility, see your phone’s manual or visit the website: Websites owner.lincoln.
SYNC™ 3 G E251249 Item A Menu Item Recent Call List Action and Description Displays your recent calls.
SYNC™ 3 Item Menu Item Action and Description You can place a call by selecting an entry from this list. You can also sort the calls by selecting the drop down menu at the top of the screen. You can choose: All B Contacts Incoming Outgoing Missed All of your contacts from your phone display in alphabetical order. A-Z Jump Selecting this button allows you to choose a specific letter to view. C Phone Settings Displays the name of your phone and takes you to the phone settings options.
SYNC™ 3 If your phone has a voice assistant feature, you may see a button to access it in the menu. You can also press and hold the voice button on the steering wheel to use this feature. See Voice Control (page 81). Making Calls There are many ways to make calls from the SYNC 3 system, including using voice commands. See Using Voice Recognition (page 387). You can use the touchscreen to place calls as well.
SYNC™ 3 To call a number in your contacts, select: Menu Item Contacts Action and Description You can then select the name of the contact you want to call. Any numbers stored for that contact display along with any stored contact photos. You can then select the number that you want to call. The system begins the call. To call a number from your recent calls, select: Menu Item Recent Call List Menu Item Phone Keypad Select the digits of the number you wish to call. Call The system begins the call.
SYNC™ 3 Text Messaging Item Item End Call Keypad Immediately end a phone call. You can also press the button on the steering wheel. Mute You can switch the microphone off so the caller does not hear you. Privacy Transfer the call to the cell phone or back to SYNC 3. Press this to access the phone keypad. Note: Downloading and sending text messages using Bluetooth are cell phone-dependent features.
SYNC™ 3 Smartphone Connectivity (If Equipped) SYNC 3 allows you to use Apple CarPlay and Android Auto to access your phone. When you use Apple CarPlay or Android Auto, you can: • Make calls. • Send and receive messages. • Listen to music. • Use your phone's voice assistant. Apple CarPlay and Android Auto disable some SYNC 3 features. After completing the setup, your phone connects to Apple CarPlay automatically when plugged into a USB port.
SYNC™ 3 To return to SYNC 3, select the speedometer icon in the Android Auto menu bar at the bottom of the touchscreen, and then touch the option to return to SYNC. Note: Contact Google for Android Auto support. 3D city models are complete 3D models of entire city areas including navigable roads, parks, rivers and rendered buildings. 3D landmarks and city models appear in 3D map mode only. Coverage of these varies and improves with updated map releases.
SYNC™ 3 E251780 Mute: Press to mute the audio navigation guidance. Press the button again to un-mute the guidance. E251779 Points of Interest (POI) grouping icon: You can choose up to three POI icons to display on the map. If E207754 the chosen POIs are located close together or are at the same location a box is used to display a single category icon instead of repeating the same icon, in order to reduce clutter.
SYNC™ 3 Menu Item Description (number, street, city, state) For example "12 Mainstreet Dearborn MI" Partial Address (number, street) if searching in current state (number, street and zip code (or postal code in Canada)) if searching out of state You can enter unique addresses that contain door number prefixes with or without the prefix. For example, you could enter "6N340 Fairway Lane" or "340 Fairway Lane".
SYNC™ 3 Menu Item Description This is in a decimal degrees format, one to six decimal places are accepted. You are given autocomplete options below the address bar to select as you type. If you do not give an exact destination, a menu displays with your possible selections. Previous Destinations Collections of your last 40 navigation destinations display here. You can select any option from the list to select it as your destination.
SYNC™ 3 Menu Item Favorites Description Favorites include any location you have previously saved. To add Favorites: Add a Favorite Select this button and enter a location into the destination bar. Search Select this option to have the system locate the address you have entered. Save Select this button when the address you have entered appears on the screen. The address saves as a favorite and you see the favorites screen. You can now select this address from the favorites screen.
SYNC™ 3 Menu Item Description Along Route Near Destination In a City Once you have chosen your destination, press: Menu Item Action and Description Save This saves the destination to your favorites. Start This shows you a map of your entire route. You can then choose your route from three different options. Fastest Uses the fastest moving roads possible. Shortest Uses the shortest distance possible. Economical Route Uses the most fuel-efficient route.
SYNC™ 3 Once you have chosen you destination, press: Menu Item Start Action and Description The system uses a variety of screens and prompts to guide you to your destination. During Route guidance, you can press the maneuver arrow icon on the map if you want the system to repeat route guidance instructions. When the system repeats the last guidance instruction, it updates the distance to the next guidance instruction, since it detects that the vehicle is moving.
SYNC™ 3 Button Highway Exit Info Highway exit information displays on the right hand side of the screen during navigation. Points of interest icons display for restaurants, hotels, fuel stations and ATMs when they are present at the exit. You can select the POI icons to receive a listing of specific locations. You can select the POI location as a waypoint or destination if desired. Turn List Only available during an active route. Displays all of the turns on the current route.
SYNC™ 3 Button Edit Waypoints Only available if you have an active waypoint on your route. See Waypoints later in this section for information on how to set waypoints. Use this button to re-order or remove your waypoints. You can also have the system set the order for you by pressing: Optimize Order To return to your route press: Go Waypoints You can add a waypoint to a navigation route as a destination along your route. To add a waypoint: 1.
SYNC™ 3 Menu Item Add Waypoint The waypoint list then appears and you are able to re-order all of your waypoints by selecting the menu icon on the right hand side of the location. You can select up to five waypoints. You can also have the system set the order for you by pressing: Optimize Order To return to your route, press: Go SYNC AppLink The AppLink app allows you to use some SYNC 3 navigation features on your phone.
SYNC™ 3 cityseeker, when available, is a service that provides more information about certain points of interest such as restaurants, hotels and attractions. When you have selected a point of interest, the location and information appear, such as address, phone number and a star rating. • • • • • • Press More Information to see a photo, a review, a list of services and facilities, the average room or meal price and the web address. This screen displays the point of interest icons.
SYNC™ 3 HERE is the digital map provider for the navigation application. If you find map data errors, you may report them directly to HERE by going to www.here.com/mapcreator. HERE evaluates all reported map errors and responds with the result of their investigation by e-mail. Note: iPhone users need to connect the phone to the USB port.
SYNC™ 3 Menu Item Find Mobile Apps Action and Description SYNC 3 will search and connect to compatible app(s) running on your mobile device. Enabling SYNC 3 Mobile Apps In order to enable mobile apps, SYNC 3 requires user consent to send and receive app authorization information and updates using the data plan associated with the connected device. The connected device sends data to Lincoln in the United States.
SYNC™ 3 SiriusXM Traffic and Travel Link (If Note: SiriusXM Traffic and Travel Link may not be available in all markets. Equipped) WARNING Driving while distracted can result in loss of vehicle control, crash and injury. We strongly recommend that you use extreme caution when using any device that may take your focus off the road. Your primary responsibility is the safe operation of your vehicle.
SYNC™ 3 Menu Item Weather Action and Description Touch this button to view the nearby weather, current weather, or the five-day forecast for the chosen area. Map Select to see the weather map, which can show storms, radar information, charts and winds. Area Select to choose from a listing of weather locations. Sports Info Touch this button to view scores and schedules from a variety of sports. You can also save up to 10 favorite teams for easier access.
SYNC™ 3 Sound Settings Reset All Returns Treble, Midrange, and Bass sound settings to factory levels. Treble Adjusts the high frequency level. Midrange Adjusts the middle frequency level. Bass Adjusts the low frequency level. Balance / Fade Adjusts the sound ratio from side to side or front to back. Speed Compensated Vol. Adjusts the amount the audio system volume increases with speed, or turns the feature off. Occupancy Mode Optimizes the sound based on the location of the listeners.
SYNC™ 3 Menu Item Podcast Speed Action and Description For some USB devices, SYNC 3 can adjust the playback speed of podcasts. When a podcast is playing, you can choose: Slower Audiobook Speed Cover Art Priority Normal Faster For some USB devices, SYNC 3 can adjust the playback speed of audiobooks. When an audiobook is playing, you can choose: Slower Normal Faster Media Player Cover art displays from your device’s music files.
SYNC™ 3 Clock To adjust the time, select the up and down arrows on either side of the screen. The arrows on the left adjust the hour and arrows on the right adjust the minute. You can then select AM or PM. Menu Item Action and Description Clock Format Select how time displays. Auto Time Zone Update When active, the clock adjusts to time zone changes. This feature is only available in vehicles with navigation. Reset Clock to GPS Time When selected, the vehicle clock resets to GPS satellite time.
SYNC™ 3 Phone Pair your Bluetooth enabled phone with the system before using the functions in hands-free mode. Switch on Bluetooth on your device to begin pairing. See your phone’s manual if necessary. 5. The touchscreen indicates when the pairing is successful. 6. Your phone may prompt you to give the system permission to access information. To check your phone’s compatibility, see your phone’s manual or visit the website. 4. The touchscreen indicates when the pairing is successful. 5.
SYNC™ 3 Menu Item Action and Description View Devices You can then select: Add a Bluetooth Device You can add a Bluetooth enabled device by following the steps in the previous table. You can select a phone by touching the name of the phone on the screen. You then have the following options: Connect Disconnect Depending on the status of the device, you can select either of these options to interact with the selected device. Make Primary Allows you to select this device to be your preferred device.
SYNC™ 3 Menu Item Sort By: Action and Description Choose how you would like the system to display your contacts. You can choose: First Name Last Name Re-download Contacts Select this option to re-download your contact list manually. Delete Contacts Select this option to delete the in vehicle contact list. Deleting the in vehicle list does not erase the contact list on the connected phone.
SYNC™ 3 Menu Item Action and Description Text Messaging You can then select: No Alert (Silence) No sound plays when a message comes to your phone. You can select one of the three available notification sounds. Voice Readout When enabled, a voice prompt alerts you when you receive a new message.
SYNC™ 3 911 Assist Note: For this feature to work, your cell phone must have Bluetooth and connect with SYNC3. Enabling 911 Assist Menu Item 911 Assist Action and Description Press this button to enter the settings screen for this feature. You can switch this feature on and off by sliding the scrollbar as follows. Slide the scrollbar to switch this feature on. Setting Emergency Contacts You can set your contacts in the phone book for emergency quick dialing.
SYNC™ 3 The screen lists contacts in the phone book. Select the contact that you want to set as emergency contact. You can set Emergency Contact 2 by same process. You can set two Emergency Contacts in total. Note: After SYNC3 tries to place an emergency call, the Emergency Contact button displays on the touch screen. You need to press the button to call the contact through your Bluetooth phone.
SYNC™ 3 SiriusXM This button is available if SiriusXM is the active audio source. Pressing the button allows you to access the following features: Menu Item Action and Description Set Category for Seek If you select a category, seek functions only stop on channels in that category. Parental Lockout Select to create a personal identification number (PIN), which allows you to lock or unlock channels. Your initial PIN is 1234.
SYNC™ 3 Menu Item POI Icons Action and Description Enable this feature to display up to 3 POI icons on the navigation map. A rest area POI icon is displayed on the map regardless of this setting. Once this feature is activated you can select the icons you want displayed Select POIs by selecting: Incident Map Icons This menu allows you to choose which incident icons you would like to have displayed on the navigation map.
SYNC™ 3 Menu Item Second Level Messages, Actions and Descriptions Automatically Find Parking The system searches for and displays available parking locations as you approach your destination. Eco Time Penalty Select a level of cost for the calculated Eco Route. The higher the setting, the longer the time allotment is for the route. Dynamic Route Guidance Enable or disable considering traffic information when planning a route.
SYNC™ 3 Navigation Source Selection The screen lists available alternative navigation sources using Applink. Mobile Apps You can enable the control of compatible mobile apps running on your Bluetooth or USB device on SYNC 3. In order to enable mobile apps, SYNC 3 requires user consent to send and receive app authorization information and updates using the data plan associated with the connected device. Note: Not all Mobile Apps are compatible with the system.
SYNC™ 3 Menu Item Action and Description Update Needed Up-To-Date Updating Mobile Apps… The system has detected a new app No update is required. requiring authorization or a general permissions update is required. The system is trying to receive an update. Request Update Select this button if an update is required and you want to request this update manually.
SYNC™ 3 Menu Item Language Select to have the touchscreen display in English, Spanish or French. Distance Select to display units in kilometers or miles. Temperature Select to display units in Celsius or Fahrenheit. Touch Screen Beep Select to have the system beep to confirm choices made through the touchscreen. Automatic System Updates When you activate this option, the system automatically updates when you have an available Internet connection through a Wi-Fi network or mobile connection.
SYNC™ 3 Menu Item Action and Description Wi-Fi Enable this option to connect to Wi-Fi for SYNC 3 vehicle software updates. Available Networks This provides you with a list of available Wi-Fi networks within range. Clicking on a network from the list allows you to connect or disconnect from that network. The system may require a security code to connect.
SYNC™ 3 Note: The Vehicle Wi-Fi Hotspot (Vehicle Hotspot) may be operational while ignition is On and may remain operational while the ignition is Off. Note: Vehicle Hotspot services are provided by the vehicle network carrier, subject to your vehicle network carrier agreement, coverage and availability. Note: It is the account owner’s responsibility to remove the vehicle from the vehicle network carrier account when ownership of the vehicle is transferred.
SYNC™ 3 Camera Settings To make adjustments using the touchscreen, select: Message Action and Description Camera Settings Then select from the following: Rear Camera Delay You can enable or disable this option using the slider. You can find more information on the rear-view camera system in the parking aids chapter of your owner manual. Onboard Modem Serial Number (ESN) Selecting this button on the settings menu shows you the ESN number for your system.
SYNC™ 3 Display To make adjustments using the touchscreen, select: Menu Item Action and Description Display Off The screen goes black and does not display anything. Tap the screen to switch it back on. Brightness Make the screen display brighter or dimmer. Mode You can select: Auto Dim Auto The screen automatically switches between day and night modes based on the outside light level. Day The screen displays with a light background to enhance daytime viewing.
SYNC™ 3 Menu Item Advanced Mode Enable this option to remove additional voice prompts and confirmations. Phone Confirmation Enable this option to have the system confirm a contacts name with you before making a call. Voice Command List Enable this option to have the system display a list of available voice commands when the voice button is pressed. Valet Mode Valet mode allows you to lock the system. No information is accessible until the system is unlocked with the correct PIN.
SYNC™ 3 Cell phone issues Issue Possible cause Possible solution There is background noise The audio control settings on your cell during a phone call. phone may be affecting SYNC 3 performance. Refer to your device's manual about audio adjustments. Try switching your cell phone off, resetting it or removing the battery, then try again. During a call, I can hear the other person but they Possible cell phone malfunction. cannot hear me. Make sure that the microphone for SYNC 3 is not set to off.
SYNC™ 3 Cell phone issues Issue Possible cause Possible solution The system says "Phonebook downloaded" but my Limitations on your cell phone's capabSYNC 3 phonebook is ility. empty or is missing contacts. This is a cell phone-dependent feature. Make sure you allow SYNC 3 to retrieve contacts from your phone. Refer to your cell manual. If the missing contacts are stored on your SIM card, move them to your cell phone's memory.
SYNC™ 3 Cell phone issues Issue Possible cause iPhone Possible solution • • • • • Go to your cell phone's Settings. Go to the Bluetooth Menu. Press the blue circle to the right of the device named with your vehicle make and model to enter the next menu. Turn Show Notifications on. Disconnect then reconnect your iPhone from the SYNC 3 system to activate this settings update. Your iPhone is now set up to forward incoming text messages to SYNC 3.
SYNC™ 3 Cell phone issues Issue Possible cause Possible solution Text messages from WhatsApp and Facebook Messenger are not supported. Audible text messages do not work on my cell phone. This is a cell phone-dependent feature. Your cell phone must support downloading text messages through Bluetooth to receive incoming text messages. This is a cell phone limitation. Because each cell phone is different, refer to your device's manual for the specific cell phone you are pairing.
SYNC™ 3 USB and Bluetooth Stereo issues Issue Possible cause Possible solution The device has a lock screen enabled. Make sure your device is unlocked before connecting it to SYNC 3. SYNC 3 does not recognize my device when I start This is a device limitation. my vehicle. Make sure you are not leaving the device in your vehicle during very hot or cold temperatures. This is a device-dependent feature. Bluetooth audio does not stream. SYNC 3 does not recognize music that is on my device.
SYNC™ 3 USB and Bluetooth Stereo issues Issue Possible cause Possible solution Disconnect the device from SYNC 3. Try switching your device off, resetting it or removing the battery, then connect it back to SYNC 3. When I connect my device, I sometimes do not hear This is a device limitation. any sound. To listen to Apple devices through USB, select AirPlay from the devices Control Center, then select Dock Connector.
SYNC™ 3 Wi-Fi Issues Issue Disconnecting after successful connection. Possible cause Possible solution Weak signal probably due to distance from the hotspot, obstruction or high interference. Position the vehicle close to the hotspot with the front of the vehicle facing the hotspot direction and remove obstacles if possible. Other Wi-Fi, Bluetooth, microwave and cordless phones may cause interference.
SYNC™ 3 Wi-Fi Issues Issue Possible cause SYNC 3 is not seen when SYNC 3 does not currently provide a searching for Wi-Fi hotspot. networks from your phone or other devices. Possible solution SYNC 3 currently does not provide a hotspot. Software download takes too long.
SYNC™ 3 AppLink issues Issue Possible cause(s) Possible solution(s) AppLink Mobile Applications: When I select "Find You did not connect an Applink CompatMobile Apps," SYNC 3 ible phone to SYNC 3. does not find any applications. Make sure you have a compatible smartphone; an Android with OS 2.3 or higher or an iPhone 3GS or newer with iOS 5.0 or higher. Additionally, make sure you pair and connect your phone to SYNC 3 in order to find AppLink-capable apps on your device.
SYNC™ 3 AppLink issues Issue My Android phone is connected, my app(s) are running, I restarted them, but I still cannot find any apps. Possible cause(s) Possible solution(s) There is a Bluetooth issue on some older Switch Bluetooth off and then on to reset it on your phone. If you are versions of the Android operating system in your vehicle, SYNC 3 should be able to automatically re-connect that may cause apps that were found on to your phone if you press the "Phone" button.
SYNC™ 3 Voice command issues Issue SYNC 3 does not understand what I am saying. Possible cause You may be using the wrong voice commands. Possible solution Review the cell phone voice commands and the media voice commands at the beginning of their respective sections. Refer to the audio display during an active voice session to find a list of voice commands there. You may be speaking too soon or at the Wait for the system to prompt you before you state your command. wrong time.
SYNC™ 3 Voice command issues Issue Possible cause Possible solution SYNC 3 does not under- You may not be saying the name exactly as it appears on your phonebook. stand or is calling the wrong contact when I want The contact name may contain special to make a call. characters. Make sure that you are saying the name exactly as it appears on your phone. For example, if your contact is "Joe Wilson", say "Call Joe Wilson". If your contact name is "Mom", say "Call Mom".
SYNC™ 3 Voice command issues Issue Possible cause Possible solution The SYNC 3 voice control system is having trouble recognizing foreign tracks, You may be saying the foreign names artists, albums, genres and using the currently selected language for playlist names from my SYNC 3. media player or USB flash drive. The system generates voice prompts and the SYNC 3 uses text-to-speech voice prompt pronunciation of some technology. words may not be accurate for my language.
SYNC™ 3 Personal Profiles Issue Possible cause and solution Personal Profiles have not been set up. An invalid profile name was entered. I cannot create a profile. A memory button was not selected when prompted. The vehicle’s ignition was not On and in Park or was shifted out of Run or Park while creating a profile. Personal Profiles is turned off. The lock button was not selected on a keyfob when prompted. The keyfob selected was already associated to another profile and an overwrite was declined.
SYNC™ 3 Personal Profiles Issue Possible cause and solution Another user has changed settings for the wrong Personal Profile. A Personal Profile has not been created. Personal Profiles is turned off. The requested profile is already active. The memory button being used is not linked to a profile. My profile will not recall. The keyfob being used is not linked to a profile. The wrong keyfob is being used. A button other than unlock or remote start is being pressed on a linked keyfob.
SYNC™ 3 Personal Profiles Issue Possible cause and solution Unlink and relink your keyfob in the Personal Profiles menu. You may need to see your authorized dealer. I lost a keyfob. Keyfobs had been erased and reprogramed. This could happen if you let dealership add a new keyfob to replace lost one. I lost all profiles. Master Reset had been performed without your acknowledgement.
SYNC™ 3 SYNC 3 System Reset The system has a System Reset feature that can be performed if the function of a SYNC 3 feature is lost. This reset is intended to restore functionality and will not erase any information previously stored in the system (such as paired devices, phonebook, call history, text messages, or user settings). To perform a System Reset, press and hold the Seek Up (>>|) button while pressing and holding the Radio Power button. After approximately 5 seconds the screen will go black.
Accessories For a complete listing of the accessories that are available for your vehicle, please contact your authorized dealer or visit our online store at: Web Address (United States) www.Accessories.Lincoln.com Web Address (Canada) www.LincolnCanada.com Lincoln Accessories are available for your vehicle through an authorized Lincoln dealer.
Accessories For maximum vehicle performance, keep the following information in mind when adding accessories, equipment, passengers and luggage to your vehicle: • Do not exceed the total weight capacity of the vehicle or of the front or rear axle (GVWR or GAWR as indicated on the Safety Compliance Certification label). Consult an authorized dealer for specific weight information.
Lincoln Protect PROTECT YOURSELF FROM THE RISING COST OF VEHICLE REPAIRS WITH LINCOLN PROTECT EXTENDED SERVICE PLAN. Lincoln Protect Extended Service Plans (U.S. Only) Lincoln Protect means peace of mind. It’s the extended service plan backed by the Lincoln Motor Company, and provides more protection beyond the New Vehicle Limited Warranty coverage.
Lincoln Protect Transferable Coverage If you sell your vehicle before your Lincoln Protect extended service plan coverage expires, you can transfer any remaining coverage to the new owner. Which should give you and your potential buyer a little more peace of mind. Less Cost to Properly Maintain Your Vehicle Lincoln Protect extended service plan also offers a Premium Maintenance Plan that covers all scheduled maintenance, and selected wear items.
Lincoln Protect There are several Lincoln Protect extended service plans available in various time, distance and deductible combinations. Each plan is tailored to fit your own driving needs, including reimbursement for towing and rental. When you purchase Lincoln Protect extended service plan, you receive added peace-of-mind protection throughout Canada, the United States and Mexico, provided by a network of participating authorized Lincoln Motor Company dealers.
Scheduled Maintenance GENERAL MAINTENANCE INFORMATION Failure to perform scheduled maintenance invalidates warranty coverage on parts affected by the lack of maintenance. Why Maintain Your Vehicle? Why Maintain Your Vehicle at Your Dealership? Carefully following the maintenance schedule helps protect against major repair expenses resulting from neglect or inadequate maintenance and may help to increase the value of your vehicle when you sell or trade it.
Scheduled Maintenance Your vehicle is equipped with the Intelligent Oil-Life Monitor system, which displays a message in the information display at the proper oil change interval. This interval may be up to one year or 10,000 mi (16,000 km). When the oil change message appears in the information display, it is time for an oil change. Make sure you perform the oil change within two weeks or 500 mi (800 km) of the message appearing. Make sure you reset the Intelligent Oil-Life Monitor after each oil change.
Scheduled Maintenance Check Every Month Engine oil level. Function of all interior and exterior lights. Tires (including spare) for wear and proper pressure. Windshield washer fluid level. Fuel and water separator. Drain if necessary (or if indicated by the information display). Holes and slots in the tail pipe to make sure they are functional and clear of debris. Check Every Six Months Battery connections. Clean if necessary. Body and door drain holes for obstructions. Clean if necessary.
Scheduled Maintenance Check Every Six Months Safety belts and seat latches for wear and function. Safety warning lamps (brake, ABS, airbag and safety belt) for operation. Washer spray and wiper operation. Clean or replace blades as necessary. Multi-Point Inspection In order to keep your vehicle running right, it is important to have the systems on your vehicle checked regularly. This can help identify potential issues and prevent major problems.
Scheduled Maintenance Multi-Point Inspection Exterior lamps operation Steering and linkage 1 1 2 Fluid levels ; fill if necessary Tires (including spare) for wear and proper pressure For oil and fluid leaks Windshield for cracks, chips or pits Half-shaft dust boots Washer spray and wiper operation Brake, coolant recovery reservoir, automatic transmission and window washer 2 If your vehicle is equipped with a temporary mobility kit, check the tire sealant expiration Use By date on the canister.
Scheduled Maintenance When to expect the OIL CHANGE REQUIRED Message Interval Vehicle Use and Example Normal 7,500–10,000 mi (12,000–16,000 km) Normal commuting with highway driving No, or moderate, load or towing Flat to moderately hilly roads No extended idling Severe 5,000–7,500 mi (8,000–12,000 km) Moderate to heavy load or towing Mountainous or off-road conditions Extended idling Extended hot or cold operation Extreme 3,000–5,000 mi (5,000–8,000 km) Maximum load or towing Extreme hot or cold op
Scheduled Maintenance Maintenance Intervals At Every Oil Change Interval as Indicated by the Information Display 1 2 Change engine oil and filter. Rotate the tires. Perform a multi-point inspection (recommended). Inspect the automatic transmission fluid level. Consult your dealer for requirements. Inspect the brake pads, rotors, hoses and parking brake. Inspect the engine cooling system strength and hoses. Inspect the exhaust system and heat shields. Inspect the rear axle and U-joints (All-Wheel Drive).
Scheduled Maintenance Other Maintenance Items Every 20,000 mi (32,000 km) Replace cabin air filter. Every 30,000 mi (48,000 km) Replace engine air filter. 1 At 100,000 mi (160,000 km) Change engine coolant. 2 Every 100,000 mi (160,000 km) Every 150,000 mi (240,000 km) Replace spark plugs. Inspect accessory drive belt(s). 3 Change automatic transmission fluid. Replace accessory drive belt(s). 4 1 Perform these maintenance items within 3,000 mi (4,800 km) of the last engine oil and filter change.
Scheduled Maintenance SPECIAL OPERATING CONDITIONS SCHEDULED MAINTENANCE If you operate your vehicle primarily in any of the following conditions, you need to perform extra maintenance as indicated. If you operate your vehicle occasionally under any of these conditions, it is not necessary to perform the extra maintenance. For specific recommendations, see your dealership service advisor or technician.
Scheduled Maintenance Towing a Trailer or Using a Car-top Carrier As required Change engine oil and filter as indicated by the information display and perform services listed in the Normal Scheduled Maintenance chart. Inspect frequently, service as required Inspect rear axle and U-joints (AWD). Every 30,000 mi (48,000 km) Change automatic transmission fluid. Every 60,000 mi (96,000 km) Replace spark plugs.
Scheduled Maintenance Extensive Idling or Low-speed Driving for Long Distances, as in Heavy Commercial Use Such as Delivery, Taxi, Patrol Car or Livery 1 Every 30,000 mi (48,000 km) Change automatic transmission fluid. Every 60,000 mi (96,000 km) Replace spark plugs. This is an optional feature. Operating in Dusty or Sandy Conditions Such as Unpaved or Dusty Roads Inspect frequently, service as required 1 Replace cabin air filter. Replace engine air filter.
Scheduled Maintenance Operating in Dusty or Sandy Conditions Such as Unpaved or Dusty Roads Perform multi-point inspection. Every 30,000 mi (48,000 km) 1 Change automatic transmission fluid. This is an optional feature. 2 Reset your Intelligent Oil-Life Monitor after engine oil and filter changes. See Oil Change Indicator Reset (page 290).
Scheduled Maintenance Engine Air Filter and Cabin Air Filter Replacement The life of the engine air filter and cabin air filter is dependent on exposure to dusty and dirty conditions. Vehicles operated in these conditions require frequent inspection and replacement of the engine air filter and cabin air filter.
Scheduled Maintenance Repair Order #: Dealer stamp Distance: Engine hours (optional): Multi-point inspection (recommended): Signature: E146852 494 MKC (TME) Canada/United States of America, JJ7J 19A321 AA enUSA, Edition date: 201707, Second Printing
Scheduled Maintenance Repair Order #: Dealer stamp Distance: Engine hours (optional): Multi-point inspection (recommended): Signature: E146852 495 MKC (TME) Canada/United States of America, JJ7J 19A321 AA enUSA, Edition date: 201707, Second Printing
Scheduled Maintenance Repair Order #: Dealer stamp Distance: Engine hours (optional): Multi-point inspection (recommended): Signature: E146852 496 MKC (TME) Canada/United States of America, JJ7J 19A321 AA enUSA, Edition date: 201707, Second Printing
Scheduled Maintenance Repair Order #: Dealer stamp Distance: Engine hours (optional): Multi-point inspection (recommended): Signature: E146852 497 MKC (TME) Canada/United States of America, JJ7J 19A321 AA enUSA, Edition date: 201707, Second Printing
Scheduled Maintenance Repair Order #: Dealer stamp Distance: Engine hours (optional): Multi-point inspection (recommended): Signature: E146852 498 MKC (TME) Canada/United States of America, JJ7J 19A321 AA enUSA, Edition date: 201707, Second Printing
Scheduled Maintenance Repair Order #: Dealer stamp Distance: Engine hours (optional): Multi-point inspection (recommended): Signature: E146852 499 MKC (TME) Canada/United States of America, JJ7J 19A321 AA enUSA, Edition date: 201707, Second Printing
Scheduled Maintenance Repair Order #: Dealer stamp Distance: Engine hours (optional): Multi-point inspection (recommended): Signature: E146852 500 MKC (TME) Canada/United States of America, JJ7J 19A321 AA enUSA, Edition date: 201707, Second Printing
Scheduled Maintenance Repair Order #: Dealer stamp Distance: Engine hours (optional): Multi-point inspection (recommended): Signature: E146852 501 MKC (TME) Canada/United States of America, JJ7J 19A321 AA enUSA, Edition date: 201707, Second Printing
Scheduled Maintenance Repair Order #: Dealer stamp Distance: Engine hours (optional): Multi-point inspection (recommended): Signature: E146852 502 MKC (TME) Canada/United States of America, JJ7J 19A321 AA enUSA, Edition date: 201707, Second Printing
Scheduled Maintenance Repair Order #: Dealer stamp Distance: Engine hours (optional): Multi-point inspection (recommended): Signature: E146852 503 MKC (TME) Canada/United States of America, JJ7J 19A321 AA enUSA, Edition date: 201707, Second Printing
Scheduled Maintenance Repair Order #: Dealer stamp Distance: Engine hours (optional): Multi-point inspection (recommended): Signature: E146852 504 MKC (TME) Canada/United States of America, JJ7J 19A321 AA enUSA, Edition date: 201707, Second Printing
Scheduled Maintenance Repair Order #: Dealer stamp Distance: Engine hours (optional): Multi-point inspection (recommended): Signature: E146852 505 MKC (TME) Canada/United States of America, JJ7J 19A321 AA enUSA, Edition date: 201707, Second Printing
Scheduled Maintenance Repair Order #: Dealer stamp Distance: Engine hours (optional): Multi-point inspection (recommended): Signature: E146852 506 MKC (TME) Canada/United States of America, JJ7J 19A321 AA enUSA, Edition date: 201707, Second Printing
Scheduled Maintenance Repair Order #: Dealer stamp Distance: Engine hours (optional): Multi-point inspection (recommended): Signature: E146852 507 MKC (TME) Canada/United States of America, JJ7J 19A321 AA enUSA, Edition date: 201707, Second Printing
Scheduled Maintenance Repair Order #: Dealer stamp Distance: Engine hours (optional): Multi-point inspection (recommended): Signature: E146852 508 MKC (TME) Canada/United States of America, JJ7J 19A321 AA enUSA, Edition date: 201707, Second Printing
Scheduled Maintenance Repair Order #: Dealer stamp Distance: Engine hours (optional): Multi-point inspection (recommended): Signature: E146852 509 MKC (TME) Canada/United States of America, JJ7J 19A321 AA enUSA, Edition date: 201707, Second Printing
Scheduled Maintenance Repair Order #: Dealer stamp Distance: Engine hours (optional): Multi-point inspection (recommended): Signature: E146852 510 MKC (TME) Canada/United States of America, JJ7J 19A321 AA enUSA, Edition date: 201707, Second Printing
Scheduled Maintenance Repair Order #: Dealer stamp Distance: Engine hours (optional): Multi-point inspection (recommended): Signature: E146852 511 MKC (TME) Canada/United States of America, JJ7J 19A321 AA enUSA, Edition date: 201707, Second Printing
Scheduled Maintenance Repair Order #: Dealer stamp Distance: Engine hours (optional): Multi-point inspection (recommended): Signature: E146852 512 MKC (TME) Canada/United States of America, JJ7J 19A321 AA enUSA, Edition date: 201707, Second Printing
Appendices ELECTROMAGNETIC COMPATIBILITY WARNINGS Do not place objects or mount equipment on or near the airbag cover, on the side of the seatbacks (of the front seats), or in front seat areas that may come into contact with a deploying airbag. Failure to follow these instructions may increase the risk of personal injury in the event of a crash. WARNINGS Do not fasten antenna cables to original vehicle wiring, fuel pipes and brake pipes.
Appendices Car E239120 514 MKC (TME) Canada/United States of America, JJ7J 19A321 AA enUSA, Edition date: 201707, Second Printing
Appendices Van E239122 515 MKC (TME) Canada/United States of America, JJ7J 19A321 AA enUSA, Edition date: 201707, Second Printing
Appendices Truck E239121 Frequency Band MHz Maximum output power Watt (Peak RMS) Antenna Positions 1-30 50 1 50-54 50 2, 3 68-88 50 2, 3 516 MKC (TME) Canada/United States of America, JJ7J 19A321 AA enUSA, Edition date: 201707, Second Printing
Appendices Frequency Band MHz Maximum output power Watt (Peak RMS) Antenna Positions 142-176 50 2, 3 380-512 50 2, 3 806-870 10 2, 3 Note: After the installation of radio frequency transmitters, check for disturbances from and to all electrical equipment in your vehicle, both in the standby and transmit modes. Check all electrical equipment: • With the ignition ON. • With the engine running. • During a road test at various speeds.
Appendices END USER LICENSE AGREEMENT VEHICLE SOFTWARE END USER LICENSE AGREEMENT (EULA) • • You (“You” or “Your” as applicable) have acquired a vehicle having several devices, including SYNC ® and various control modules, ("DEVICES") that include software licensed or owned by Ford Motor Company and its affiliates ("FORD MOTOR COMPANY").
Appendices • • Limitations on Distributing, Copying, Modifying and Creating Derivative Works: You may not distribute, copy, make modifications to or create derivative works based on the SOFTWARE, except and only to the extent that such activity is expressly permitted by applicable law notwithstanding this limitation or to the extent as may be permitted by the licensing terms governing use of any open source components included with the SOFTWARE.
Appendices MOTOR COMPANY, its affiliates and/or its designated agent reserve the right to discontinue without liability any Internet-based services provided to you or made available to you through the use of the SOFTWARE.
Appendices • • Links to Third Party Sites: The SOFTWARE may provide you with the ability to link to third party sites. The third party sites are not under the control of FORD MOTOR COMPANY, its affiliates and/or its designated agent.
Appendices EXPORT RESTRICTIONS: You acknowledge that the SOFTWARE is subject to U.S. and European Union export jurisdiction. You agree to comply with all applicable international and national laws that apply to the SOFTWARE, including the U.S. Export Administration Regulations, as well as end-user, end-use and destination restrictions issued by U.S. and other governments.
Appendices • • • Navigation Features: Any navigation features included in the system are intended to provide turn by turn instructions to get you to a desired destination. Please make certain all persons using this system carefully read and follow instructions and safety information fully. Distraction Hazard: Any navigation features may require manual (non-verbal) setup.
Appendices Your Responsibilities and Assumptions of Risk 524 MKC (TME) Canada/United States of America, JJ7J 19A321 AA enUSA, Edition date: 201707, Second Printing
Appendices • You agree to each of the following:(a) Any use of the SOFTWARE while driving an automobile or other vehicle in violation of applicable law or otherwise driving in an unsafe manner presents a significant risk of distracted driving and should not be attempted under any circumstances;(b) Use of the SOFTWARE at excessive volume poses a significant risk of hearing damage and should not be attempted under any circumstances;(c) The SOFTWARE may not be compatible with new or different versions of an o
Appendices OR WRITTEN INFORMATION OR ADVICE GIVEN BY FORD MOTOR COMPANY OR ITS AUTHORIZED REPRESENTATIVE SHALL CREATE A WARRANTY. SHOULD THE SOFTWARE, THIRD PARTY SOFTWARE, OR THIRD-PARTY SERVICES PROVE DEFECTIVE, YOU ASSUME THE ENTIRE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION. SOME JURISDICTIONS DO NOT ALLOW THE DISCLAIMER OF IMPLIED WARRANTIES OR LIMITATIONS ON APPLICABLE STATUTORY RIGHTS OF A CONSUMER, SO THE ABOVE DISCLAIMER MAY NOT FULLY APPLY TO YOU.
Appendices (c) Small claims court. You may also litigate any dispute in small claims court in your county of residence or FORD MOTOR COMPANY’S principal place of business, if the dispute meets all requirements to be heard in the small claims court. You may litigate in small claims court whether or not You negotiated informally first. (d) Binding arbitration.
Appendices • • you three incentives: (1) pay the greater of the award or $1,000; (2) pay twice your reasonable attorney’s fees, if any; and (3) reimburse any expenses (including expert witness fees and costs) that your attorney reasonably accrues for investigating, preparing, and pursuing your claim in arbitration. The arbitrator will determine the amounts. ii. Disputes involving more than $75,000. The AAA rules will govern payment of filing fees and the AAA’s and arbitrator’s fees and expenses. iii.
Appendices (b) use your own personal judgment while driving.
Appendices iii. is harmful, threatening, abusive, harassing, tortuous, defamatory, vulgar, obscene, libelous, or otherwise objectionable; and (f) lease, rent out, or otherwise permit unauthorized access by third parties to the TeleNav Software without advanced written permission of TeleNav. 4.
Appendices arbitration proceeding and the decision of the arbitrator shall be binding upon both parties. You expressly agree to waive your right to a jury trial. This Agreement and performance hereunder will be governed by and construed in accordance with the laws of the State of California, without giving effect to its conflict of law provisions.
Appendices not expressly granted in this Agreement are intended to, or shall be, granted or conferred by implication, statute, inducement, estoppel or otherwise, and TeleNav and its suppliers and licensors hereby reserve all of their respective rights other than the licenses explicitly granted in this Agreement. 8.
Appendices 9.1 End User Terms Required by HERE North America, LLC The data (“Data”) is provided for your personal, internal use only and not for resale. It is protected by copyright, and is subject to the following terms and conditions which are agreed to by you, on the one hand, and Telenav (“Telenav”) and its licensors (including their licensors and suppliers) on the other hand. © 2013 HERE. All rights reserved.
Appendices communication with any positioning devices or any mobile or wireless-connected electronic or computer devices, including without limitation cellular phones, palmtop and handheld computers, pagers, and personal digital assistants or PDAs. Warning. The Data may contain inaccurate or incomplete information due to the passage of time, changing circumstances, sources used and the nature of collecting comprehensive geographic data, any of which may lead to incorrect results. No Warranty.
Appendices Entire Agreement. These terms and conditions constitute the entire agreement between Telenav (and its licensors, including their licensors and suppliers) and you pertaining to the subject matter hereof, and supersedes in their entirety any and all written or oral agreements previously existing between us with respect to such subject matter. Governing Law.
Appendices b. Limitation on Liability: The Third Party Data licensors, including Her Majesty, Canada Post and NRCan, shall not be liable: (i) in respect of any claim, demand or action, irrespective of the nature of the cause of the claim, demand or action alleging any loss, injury or damages, direct or indirect, which may result from the use or possession of such Data; or (ii) in any way for loss of revenues or contracts, or any other consequential loss of any kind resulting from any defect in the Data. B.
Appendices under the Agreement, or as otherwise may be provided, by Client) which shall include the following provisions on behalf of the Third Party Data licensors, including Her Majesty, Canada Post and NRCan: The Data may include or reflect data of licensors, including Her Majesty the Queen in the Right of Canada (“Her Majesty”), Canada Post Corporation (“Canada Post”) and the Department of Natural Resources Canada (“NRCan”). Such data is licensed on an “as is” basis.
Appendices Ecuador II. Mexico. The following provision applies to the Data for Mexico, which includes certain data from the Instituto Nacional de Estadística y Geografía (“INEGI”): A. Any and all copies of the Data and/or packaging containing Data for Mexico shall contain the following notice: “Fuente: INEGI (Instituto Nacional de Estadística y Geografía)” III. Latin America Territory A. Third Party Notices.
Appendices shall mean Geomarketing applications, GIS applications, mobile business asset management applications, call center applications, telematics applications, public organization Internet applications or for providing geocoding services. V. Europe Territory A. Use of Certain Traffic Codes in Europe 1. General Restrictions Applicable to Traffic Codes.
Appendices C. OS Enforcement. Without limiting Section IV(B) above, with respect to Data for the Territory of Great Britain, Client acknowledges and agrees that the Ordnance Survey (“OS”) may bring a direct action against Client to enforce compliance with the OS copyright notice (see Section IV(D) below) and paper map requirements (see Section IV(B) above) contained in this Agreement. D. Third Party Notices.
Appendices update such list from time to time. The license rights granted to Client under this TL with respect to the Data for such countries are contingent upon Client’s compliance with all applicable laws and regulations, including, without limitation, any required licenses or approvals to distribute the Application incorporating such Data in such respective countries. VI. Australia Territory A. Third Party Notices.
Appendices (ii) END USER AGREES TO INDEMNIFY AND HOLD HARMLESS THE UNDERLYING WIRELESS SERVICE CARRIER AND ITS OFFICERS, EMPLOYEES, AND AGENTS AGAINST ANY AND ALL CLAIMS, INCLUDING WITHOUT LIMITATION CLAIMS FOR LIBEL, SLANDER, OR ANY PROPERTY DAMAGE, PERSONAL INJURY OR DEATH, ARISING IN ANY WAY, DIRECTLY OR INDIRECTLY, IN CONNECTION WITH THIS AGREEMENT OR THE USE, FAILURE TO USE, OR INABILITY TO USE THE DEVICE EXCEPT WHERE THE CLAIMS RESULT FROM THE UNDERLYING CARRIER’S GROSS NEGLIGENCE OR WILLFUL MISCONDUC
Appendices it, and (ii) save it, provided that you do not remove any copyright notices that appear and do not modify the Data in any way. You agree not to otherwise reproduce, copy, modify, decompile, disassemble or reverse engineer any portion of this Data, and may not transfer or distribute it in any form, for any purpose, except to the extent permitted by mandatory laws.
Appendices Limited Liability: TO THE EXTENT PERMITTED BY APPLICABLE LAW, NAV2 AND ITS LICENSORS (INCLUDING THEIR LICENSORS AND SUPPLIERS) SHALL NOT BE LIABLE TO YOU: IN RESPECT OF ANY CLAIM, DEMAND OR ACTION, IRRESPECTIVE OF THE NATURE OF THE CAUSE OF THE CLAIM, DEMAND OR ACTION ALLEGING ANY LOSS, INJURY OR DAMAGES, DIRECT OR INDIRECT, WHICH MAY RESULT FROM THE USE OR POSSESSION OF THE INFORMATION; OR FOR ANY LOSS OF PROFIT, REVENUE, CONTRACTS OR SAVINGS, OR ANY OTHER DIRECT, INDIRECT, INCIDENTAL, SPECIAL O
Appendices 2000-2007 Gracenote. Gracenote Software, copyright © 2000-2007 Gracenote. This product and service may practice one or more of the following U.S. Patents 5,987,525; 6,061,680; 6,154,773; 6,161,132; 6,230,192; 6,230,207; 6.240,459; 6,330,593 and other patents issued or pending. Some services supplied under license from Open Globe, Inc. for U.S. Patent 6,304,523. Gracenote and CDDB are registered trademarks of Gracenote.
Appendices Gracenote uses a unique identifier to track queries for statistical purposes. The purpose of a randomly assigned numeric identifier is to allow Gracenote to count queries without knowing anything about who you are. For more information, see the web page at www.gracenote.com for the Gracenote Privacy Policy. THE GRACENOTE SOFTWARE, EACH ITEM OF GRACENOTE DATA AND THE GRACENOTE CONTENT ARE LICENSED TO YOU "AS IS".
Appendices Taiwan Territory Note: In accordance with the management approach of low-power radio wave radiation motors: Article 12: For approved and certified low-power radiation motor models, companies, firms or users must not alter the frequency, increase the power or change the characteristics and functions of the original design without authorization. Article 14: The usage of low-power radio-frequency motors must not affect aviation safety and interfere with legal telecommunications.
Appendices SUNA Products and/or Services are intended as an aid to personal motoring and travel planning, and do not provide comprehensive or accurate information on all occasions. On occasions, you may experience additional delay as a result of using SUNA Products and/or Services. You acknowledge that it is not intended, or suitable, for use in applications where time of arrival or driving directions may impact the safety of the public or yourself. 4.
Appendices TYPE APPROVALS RF Certification Logos for Tire Pressure Monitoring Sensor(s) E253822 Malaysia E207818 European Union EU E253812 E207816 Argentina E253824 Ghana E253813 Mexico E253823 Jordan E197509 Brazil 549 MKC (TME) Canada/United States of America, JJ7J 19A321 AA enUSA, Edition date: 201707, Second Printing
Appendices E253820 Singapore E197811 E198001 Moldova Philippines E253816 E198002 Russia South Africa E207821 Morocco E253819 South Korea E253817 Oman E197844 Serbia 550 MKC (TME) Canada/United States of America, JJ7J 19A321 AA enUSA, Edition date: 201707, Second Printing
Appendices E207817 United Arab Emirates E203679 Taiwan E269662 RF Certification Logos for Mid Range Radar Ghana E269659 E269660 Argentina Jordan E253818 Ukraine 551 MKC (TME) Canada/United States of America, JJ7J 19A321 AA enUSA, Edition date: 201707, Second Printing
Appendices Brazil E269661 E269663 Morocco United Arab Emirates RF Certification Logos for Passive AntiTheft System E269674 Ghana E269664 South Africa E269666 Jordan E269675 552 MKC (TME) Canada/United States of America, JJ7J 19A321 AA enUSA, Edition date: 201707, Second Printing
Appendices E269673 E269669 E269676 Malaysia Pakistan Singapore E269670 E269672 E269667 Morocco Serbia South Africa 553 MKC (TME) Canada/United States of America, JJ7J 19A321 AA enUSA, Edition date: 201707, Second Printing
Appendices Djibouti E269671 E269677 Ukraine Vietnam E272193 RF Certification Logos for Radio Transceiver Module Jamaica E269668 United Arab Emirates E272194 Jordan E272192 554 MKC (TME) Canada/United States of America, JJ7J 19A321 AA enUSA, Edition date: 201707, Second Printing
Appendices E269683 E272195 E269685 Morocco Paraguay South Africa E269684 E269681 E269682 Pakistan Serbia Ukraine 555 MKC (TME) Canada/United States of America, JJ7J 19A321 AA enUSA, Edition date: 201707, Second Printing
Appendices Ghana E272196 United Arab Emirates RF Certification Logos for Blind Spot Information System E269694 United Arab Emirates E269697 Malaysia E269693 Vietnam E269696 E269695 South Africa 556 MKC (TME) Canada/United States of America, JJ7J 19A321 AA enUSA, Edition date: 201707, Second Printing
Index A About This Manual............................................7 ABS Adjusting the Steering Wheel - Vehicles With: Manual Adjustable Steering Column............................................................79 Adjusting the Steering Wheel - Vehicles With: Power Adjustable Steering Column............................................................79 See: Brakes...........................................................186 End of Travel Position..........................................
Index Switching the System On and Off.....................91 Blind Spot Information System.................224 Automatic Transmission...............................175 Switching the System Off and On..................225 System Errors......................................................225 Using the Blind Spot Information System..............................................................224 Automatic Transmission Adaptive Learning............................................................
Index Rear Window Wiper Blade...............................298 Cleaning the Interior...................................309 Checking MyKey System Status..................61 Cleaning Black Label or Presidential Interior..............................................................309 MyKey Distance......................................................61 Number of Admin Keys.......................................62 Number of MyKeys...............................................62 Cruise Control..........
Index Driving Hints..................................................250 Driving Through Water................................251 DRL Severe Climates.................................................293 What You Should Know About Fail-Safe Cooling.............................................................293 See: Daytime Running Lamps...........................90 Engine Emission Control..............................171 Engine Immobilizer E Economical Driving......................................
Index F Fastening the Seatbelts................................34 How to Extract Seatbelts in the Rear Outermost Positions........................................37 Seatbelt Locking Modes.....................................35 Using a Sliding Clip..............................................35 Using Seatbelts During Pregnancy..................35 Flat Tire See: Changing a Road Wheel.........................337 Floor Mats.......................................................
Index Using Hill Start Assist.........................................190 Hints on Controlling the Interior Climate..........................................................135 Defogging the Side Windows in Cold Weather.............................................................136 General Hints........................................................135 Quickly Cooling the Interior..............................136 Quickly Heating the Interior.............................
Index Keys and Remote Controls...........................54 L Lane Keeping System..................................219 Switching the System On and Off...................219 Liftgate...............................................................72 Lighting Control...............................................87 Flashing the Headlamp High Beam.................88 Headlamp High Beam.........................................88 Lighting..............................................................
Index Normal Scheduled Maintenance.............485 Phone...............................................................416 Intelligent Oil-Life Monitor™..............................485 Maintenance Intervals.......................................487 During a Phone Call............................................421 Making Calls........................................................420 Pairing Your Cell Phone for the First Time....................................................................
Index Replacing the Battery..........................................55 Sounding the Panic Alarm..................................57 Roof Racks and Load Carriers..................236 Running-In Remote Start...................................................137 See: Breaking-In.................................................250 Automatic Settings..............................................137 Running Out of Fuel.....................................165 Removing a Headlamp.............................
Index Using Your Vehicle as an Ambulance...............14 Using Your Vehicle With a Snowplow...............14 Sun Visors.......................................................100 Special Operating Conditions Scheduled Maintenance...............................................489 Supplementary Restraints System.............43 Principle of Operation..........................................43 See: Wheels and Tires.......................................315 Exceptions.......................................
Index U Under Hood Overview................................287 Unique Driving Characteristics...................161 Universal Garage Door Opener................149 HomeLink Wireless Control System...............149 USB Port..........................................................367 Using Adaptive Cruise Control..................210 Automatic Cancellation......................................213 Blocked Sensor...................................................215 Canceling the Set Speed..................
Index Battery....................................................................105 Blind Spot Information System Indicator......105 Brake System Warning Lamp...........................106 Cruise Control Indicator....................................106 Direction Indicator..............................................106 Door Ajar...............................................................106 Electric Park Brake..............................................106 Engine Coolant Temperature Warning Lamp.....
