lincolncanada.com Second Printing Owner’s Manual Lincoln MKC Litho in U.S.A. O w n e r ’s M a n u a l August 2016 201 7 MKC HJ7J 19A321 AB owner.lincoln.
The information contained in this publication was correct at the time of going to print. In the interest of continuous development, we reserve the right to change specifications, design or equipment at any time without notice or obligation. No part of this publication may be reproduced, transmitted, stored in a retrieval system or translated into any language in any form by any means without our written permission. Errors and omissions excepted. © Ford Motor Company 2016 All rights reserved.
Table of Contents Airbag Disposal................................................51 Introduction Seatbelts About This Manual............................................7 Symbols Glossary..............................................7 Data Recording..................................................9 California Proposition 65...............................12 Perchlorate........................................................12 Lincoln Automotive Financial Services...........................................
Table of Contents Security Passive Anti-Theft System............................75 Anti-Theft Alarm..............................................76 Steering Wheel Adjusting the Steering Wheel......................78 Audio Control...................................................79 Voice Control...................................................80 Cruise Control.................................................80 Information Display Control.........................80 Heated Steering Wheel...................
Table of Contents Auxiliary Power Points Auxiliary Power Points.................................153 Storage Compartments Center Console.............................................155 Overhead Console.......................................155 Ticket Holders................................................155 Starting and Stopping the Engine General Information......................................156 Keyless Starting.............................................156 Starting a Gasoline Engine................
Table of Contents Load Carrying Rear Under Floor Storage..........................237 Luggage Covers...........................................237 Roof Racks and Load Carriers...................237 Load Limit.......................................................238 Towing Towing a Trailer.............................................243 Trailer Sway Control....................................244 Recommended Towing Weights...............244 Essential Towing Checks............................
Table of Contents Cleaning Products........................................307 Cleaning the Exterior..................................308 Waxing.............................................................310 Cleaning the Engine.....................................310 Cleaning the Windows and Wiper Blades...........................................................311 Cleaning the Interior......................................311 Cleaning the Instrument Panel and Instrument Cluster Lens.......................
6 MKC (TME) Canada/United States of America, enUSA, Edition date: 201601, Second Printing
Introduction ABOUT THIS MANUAL Thank you for choosing Lincoln. We recommend that you take some time to get to know your vehicle by reading this manual. The more that you know about it, the greater the safety and pleasure you will get from driving it. WARNING Driving while distracted can result in loss of vehicle control, crash and injury. We strongly recommend that you use extreme caution when using any device that may take your focus off the road.
Introduction Anti-lock braking system Child seat lower anchor Fan warning Avoid smoking, flames or sparks Child seat tether anchor Fasten seatbelt Battery Cruise control Flammable E231160 E71340 Battery acid Do not open when hot Front airbag Brake fluid - non petroleum based Engine air filter Front fog lamps Brake system Engine coolant Fuel pump reset Cabin air filter Engine coolant temperature Fuse compartment Check fuel cap Engine oil Hazard warning flashers Child safety door lock
Introduction Heated windshield Parking aid Service engine soon Interior luggage compartment release Parking brake Side airbag Jack Power steering fluid Shield the eyes Keep out of reach of children Power windows front/rear E139213 E167012 Stability control E138639 E161353 Lighting control Power window lockout Low tire pressure warning Requires registered technician DATA RECORDING E231159 Maintain correct fluid level Safety alert Note operating instructions See Owner's Manual Service
Introduction vehicle, Ford Motor Company (Ford of Canada in Canada), and service and repair facilities may access or share among them vehicle diagnostic information received through a direct connection to your vehicle when diagnosing or servicing your vehicle.
Introduction This data can help provide a better understanding of the circumstances in which crashes and injuries occur. Note: Event data recorder data is recorded by your vehicle only if a non-trivial crash situation occurs; no data is recorded by the event data recorder under normal driving conditions and no personal data or information (e.g., name, gender, age, and crash location) is recorded (see limitations regarding 911 Assist and Traffic, directions and Information privacy below).
Introduction Additionally, when you connect to Traffic, Directions and Information (if equipped, U.S. only), the service uses GPS technology and advanced vehicle sensors to collect the vehicle’s current location, travel direction, and speed (“vehicle travel information”), only to help provide you with the directions, traffic reports, or business searches that you request. If you do not want Ford or its vendors to receive this information, do not activate the service.
Introduction P.O. Box 542000 Collision Repairs Omaha, NE 68154-8000 We hope that you never experience a collision, but accidents do happen. Genuine Ford replacement collision parts meet our stringent requirements for fit, finish, structural integrity, corrosion protection and dent resistance. During vehicle development we validate that these parts deliver the intended level of protection as a whole system.
Introduction On Board Diagnostics Data Link Connector WARNING Do not connect wireless plug-in devices to the data link connector. Unauthorized third parties could gain access to vehicle data and impair the performance of safety related systems. Only allow repair facilities that follow our service and repair instructions to connect their equipment to the data link connector.
Introduction Using mobile communications equipment is becoming increasingly important in the conduct of business and personal affairs. However, you must not compromise your own or others’ safety when using such equipment. Mobile communications can enhance personal safety and security when appropriately used, particularly in emergency situations. Safety must be paramount when using mobile communications equipment to avoid negating these benefits.
Environment PROTECTING THE ENVIRONMENT You must play your part in protecting the environment. Correct vehicle usage and the authorized disposal of waste, cleaning and lubrication materials are significant steps toward this aim.
Child Safety GENERAL INFORMATION See the following sections for directions on how to properly use safety restraints for children. WARNINGS Always make sure your child is secured properly in a device that is appropriate for their height, age and weight. Child safety restraints must be bought separately from your vehicle. Failure to follow these instructions and guidelines may result in an increased risk of serious injury or death to your child. WARNINGS All children are shaped differently.
Child Safety Recommendations for Safety Restraints for Children Child Child size, height, weight, or age Recommended restraint type Infants or toddlers Children weighing 40 lb (18 kg) or less (generally age four or younger). Use a child safety seat (sometimes called an infant carrier, convertible seat, or toddler seat). Small children Children who have outgrown or no longer properly fit in a child safety seat (generally children who are less than 4 ft. 9 in. (1.
Child Safety • • • You are required by law to properly use safety seats for infants and toddlers in the United States and Canada. Many states and provinces require that small children use approved booster seats until they reach age eight, a height of 4 feet 9 inches (1.45 meters) tall, or 80 lb (36 kg). Check your local and state or provincial laws for specific requirements about the safety of children in your vehicle.
Child Safety When installing a child safety seat with combination lap and shoulder belts: • Use the correct safety belt buckle for that seating position. • Insert the belt tongue into the proper buckle until you hear a snap and feel it latch. Make sure the tongue is securely fastened in the buckle. • Keep the buckle release button pointing up and away from the safety seat, with the tongue between the child seat and the release button, to prevent accidental unbuckling.
Child Safety 7. Try to pull the belt out of the retractor to make sure the retractor is in the automatic locking mode (you should not be able to pull more belt out). If the retractor is not locked, unbuckle the belt and repeat Steps 5 and 6. E142531 E142875 4. Insert the belt tongue into the proper buckle (the buckle closest to the direction the tongue is coming from) for that seating position until you hear a snap and feel the latch engage. Make sure the tongue is latched securely by pulling on it. 5.
Child Safety the child is added to the child restraint. It also helps to achieve the proper snugness of the child seat to your vehicle. Sometimes, a slight lean toward the buckle will additionally help to remove remaining slack from the belt. 9. Attach the tether strap (if the child seat is equipped). 10. Before placing the child in the seat, forcibly move the seat forward and back to make sure the seat is securely held in place.
Child Safety attach the child seat, however the safety belt can still be used to attach the child seat. For forward-facing child seats, the top tether strap must also be attached to the proper top tether anchor, if a top tether strap has been provided with your child seat. Attach LATCH lower attachments of the child seat only to the anchors.
Child Safety Using Tether Straps 1. Route the child safety seat tether strap over the back of the seat. For outboard seating positions, route the tether strap under the head restraint and between the head restraint posts. For the center seating positions, route the tether strap over the top of the head restraint. If needed, the head restraints can also be removed.
Child Safety BOOSTER SEATS WARNING Booster seats should be used until you can answer YES to ALL of these questions when seated without a booster seat: Never place, or allow a child to place, the shoulder belt under a child's arm or behind the back because it reduces the protection for the upper part of the body and may increase the risk of injury or death in a crash. E142539 3. Clip the tether strap to the anchor as shown. 4.
Child Safety Always use booster seats in conjunction with your vehicle lap and shoulder belt. Types of Booster Seats If your backless booster seat has a removable shield, remove the shield. If a vehicle seating position has a low seat back or no head restraint, a backless booster seat may place your child's head (as measured at the tops of the ears) above the top of the seat.
Child Safety E142596 E142597 27 MKC (TME) Canada/United States of America, enUSA, Edition date: 201601, Second Printing
Child Safety If the booster seat slides on the vehicle seat upon which it is being used, placing a rubberized mesh sold as shelf or carpet liner under the booster seat may improve this condition. Do not introduce any item thicker than this under the booster seat. Check with the booster seat manufacturer's instructions. CHILD RESTRAINT POSITIONING WARNINGS Airbags can kill or injure a child in a child seat. Never place a rear-facing child seat in front of an active airbag.
Child Safety Recommendations for attaching child safety restraints for children Use any attachment method as indicated below by X Restraint Type Combined weight of child and child seat Rear facing child seat Up to 65 lb (29.5 kg) Rear facing child seat Over 65 lb (29.5 kg) Forward facing child seat Up to 65 lb (29.5 kg) Forward facing child seat Over 65 lb (29.
Child Safety Right-Hand Side Turn clockwise to lock and counterclockwise to unlock. E112197 The childproof locks are located on the rear edge of each rear door and must be set separately for each door. Left-Hand Side Turn counterclockwise to lock and clockwise to unlock.
Seatbelts PRINCIPLE OF OPERATION WARNINGS Always drive and ride with your seatback upright and the lap belt snug and low across the hips. To reduce the risk of injury, make sure children sit where they can be properly restrained. Never let a passenger hold a child on his or her lap while your vehicle is moving. The passenger cannot protect the child from injury in a crash.
Seatbelts • • retractor and anchor pretensioner at the front outboard seating positions belt tension sensor at the front outboard passenger seating position • safety belt warning light and chime • crash sensors and monitoring system with readiness indicator. FASTENING THE SEATBELTS The front outboard and rear safety restraints in the vehicle are combination lap and shoulder belts.
Seatbelts When in use, the rear seatbelts should be placed in the belt guides on the outboard seatbacks. Using Seatbelts During Pregnancy Using a Sliding Clip (If Equipped) Always ride and drive with your seatback upright and the seatbelt properly fastened. The lap portion of the seatbelt should fit snug and be positioned low across the hips. The shoulder portion of the seatbelt should be positioned across the chest. Pregnant women should also follow this practice. See the following figure.
Seatbelts All safety restraints in the vehicle are combination lap and shoulder belts. The driver seatbelt has the first type of locking mode, and the front outboard passenger and rear seatbelts have both types of locking modes described as follows: Vehicle Sensitive Mode This is the normal retractor mode, which allows free shoulder belt length adjustment to your movements and locking in response to vehicle movement.
Seatbelts How to Disengage the Automatic Locking Mode Unbuckle the combination lap and shoulder belt and allow it to retract completely to disengage the automatic locking mode and turn on the vehicle sensitive (emergency) locking mode. How to Extract Seatbelts in the Rear Outboard Positions Seatbelts in the rear outboard positions can lock if the seatback is returned firmly to its upright position. You can unlock the seatbelts using the following procedures. For vehicles where the rear seats recline: 1.
Seatbelts Conditions of operation If... Then... The driver's safety belt is not buckled before the ignition switch is turned to the on position... The safety belt warning light illuminates 1-2 minutes and the warning chime sounds 4-8 seconds. The driver's safety belt is buckled while the indicator light is illuminated and the warning chime is sounding... The safety belt warning light and warning chime turn off.
Seatbelts If... Then... You and the front seat passenger buckle your safety belts before you switch the ignition on or less than 1-2 minutes elapse after you switch the ignition on... The Belt-Minder feature will not activate. You or the front seat passenger do not buckle your safety belts before The Belt-Minder feature activates, the safety belt warning light illuminyour vehicle reaches at least 6 mph (9.
Seatbelts Deactivating and Activating the Belt-Minder Feature WARNING While the system allows you to deactivate it, this system is designed to improve your chances of being safely belted and surviving an accident. We recommend you leave the system activated for yourself and others who may use the vehicle. Note: The driver and front passenger warnings switch on and off independently. When you perform this procedure for one seating position, do not buckle the other position as this will terminate the process.
Seatbelts Ford Motor Company recommends that all safety belt assemblies in use in vehicles involved in a crash be replaced. However, if the crash was minor and an authorized dealer finds that the belts do not show damage and continue to operate properly, they do not need to be replaced. Safety belt assemblies not in use during a crash should also be inspected and replaced if either damage or improper operation is noted. WARNINGS Only use extensions provided free of charge by Lincoln Motor Company dealers.
Personal Safety System™ The Personal Safety System provides an improved overall level of frontal crash protection to front seat occupants and is designed to help further reduce the risk of airbag-related injuries. The system is able to analyze different occupant conditions and crash severity before activating the appropriate safety devices to help better protect a range of occupants in a variety of frontal crash situations.
Supplementary Restraints System PRINCIPLE OF OPERATION WARNINGS Airbags do not inflate slowly or gently, and the risk of injury from a deploying airbag is the greatest close to the trim covering the airbag module. All occupants of your vehicle, including the driver, should always properly wear their safety belts, even when an airbag supplemental restraint system is provided. Failure to properly wear your safety belt could seriously increase the risk of injury or death.
Supplementary Restraints System While the system is designed to help reduce serious injuries, contact with a deploying airbag may also cause abrasions or swelling. Temporary hearing loss is also a possibility as a result of the noise associated with a deploying airbag.
Supplementary Restraints System Proper Driver and Front Passenger Seating Adjustment WARNING National Highway Traffic Safety Administration (NHTSA) recommends a minimum distance of at least 10 inches (25 centimeters) between an occupant’s chest and the driver airbag module. To properly position yourself away from the airbag: • Move your seat to the rear as far as you can while still reaching the pedals comfortably. • Recline the seat slightly (one or two degrees) from the upright position.
Supplementary Restraints System FRONT PASSENGER SENSING SYSTEM WARNINGS Even with Advanced Restraints Systems, children 12 and under should be properly restrained in a rear seating position. Failure to follow this could seriously increase the risk of injury or death. Sitting improperly out of position or with the seatback reclined too far can take off weight from the seat cushion and affect the decision of the front passenger sensing system, resulting in serious injury or death in a crash.
Supplementary Restraints System • • Restart the vehicle and have the person remain in this position for about two minutes. This will allow the system to detect that person and enable the passenger frontal airbag. If the indicator OFF lamp remains lit even after this, the person should be advised to ride in the rear seat.
Supplementary Restraints System Note: When the passenger airbag status indicator OFF light is illuminated, the passenger (seat mounted) side airbag may be disabled to avoid the risk of airbag deployment injuries. After all occupants have adjusted their seats and put on seatbelts, it is very important that they continue to sit properly. A properly seated occupant sits upright, leaning against the seatback, and centered on the seat cushion, with their feet comfortably extended on the floor.
Supplementary Restraints System If it is necessary to modify an advanced front airbag system to accommodate a person with disabilities, contact the Ford Customer Relationship Center. See Getting the Services You Need (page 261). WARNINGS Do not attempt to service, repair, or modify the airbag, its fuses or the seat cover on a seat containing an airbag as you could be seriously injured or killed. Contact your authorized dealer as soon as possible.
Supplementary Restraints System Note: The passenger sensing system will deactivate the passenger seat-mounted side airbag if it detects an empty passenger seat. The design and development of the side airbag system included recommended testing procedures that were developed by a group of automotive safety experts known as the Side Airbag Technical Working Group. These recommended testing procedures help reduce the risk of injuries related to the deployment of side airbags.
Supplementary Restraints System Safety Canopy will be activated, regardless of which seats are occupied. The Safety Canopy is designed to inflate between the side window area and occupants to further enhance protection provided in side impact crashes and rollover events. E75004 The system consists of the following: • Safety Canopy curtain airbags located above the trim panels over the front and rear side windows identified by a label or wording on the headliner or roof-pillar trim.
Supplementary Restraints System Your vehicle has a collection of crash and occupant sensors which provide information to the restraints control module which deploys (activates) the front safety belt pretensioners, driver airbag, passenger airbag, knee airbag(s), seat mounted side airbags, and the Safety Canopy. Based on the type of accident (frontal impact, side impact or rollover) the restraints control module will deploy the appropriate safety devices.
Supplementary Restraints System • • The knee airbag(s) may deploy based on crash severity and occupant conditions. The design of the Safety Canopy is to inflate in certain side impact crashes and when a certain likelihood of rollover is detected by the rollover sensor. The Safety Canopy may activate in other types of crashes if the vehicle experiences sufficient sideways motion or deformation, or a certain likelihood of rollover. AIRBAG DISPOSAL Contact your authorized dealer as soon as possible.
Keys and Remote Controls GENERAL INFORMATION ON RADIO FREQUENCIES This device complies with Part 15 of the FCC Rules and with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
Keys and Remote Controls REMOTE CONTROL Intelligent Access Key E151795 Note: Your vehicle keys came with a security label that provides important key cut information. Keep the label in a safe place for future reference. Removable Key Blade The intelligent access key also contains a removable key blade that you can use to unlock your vehicle. E218688 Push the release button and pull the key blade out. Replacing the Battery The intelligent access keys operate the power locks and the remote start system.
Keys and Remote Controls Note: Replacing the battery does not erase the programmed key from your vehicle. The transmitter should operate normally. 1. Push the release button and pull the key blade out. 2. Twist a thin coin under the tab hidden behind the key blade head to remove the battery cover. A message appears in the information display when the remote control battery is low. See Information Messages (page 114). The remote control uses one coin-type three-volt lithium battery CR2450 or equivalent.
Keys and Remote Controls 5. Reinstall the battery cover and the key blade. Car Finder Press the button twice within three seconds. A tone sounds and the E138623 direction indicators will flash. We recommend you use this method to locate your vehicle, rather than using the panic alarm. Remote Start WARNING To avoid exhaust fumes, do not use remote start if your vehicle is parked indoors or in areas that are not well ventilated. Note: Do not use remote start if your fuel level is low.
Keys and Remote Controls Remote Starting your Vehicle Note: You must press each button within three seconds of each other. Your vehicle will not remote start if you do not follow this sequence. A tone sounds if the system fails to start, unless quiet start is on. Quiet start runs the blower fan at a slower speed to reduce noise. You can switch this feature on or off in the information display. See General Information (page 108).
Keys and Remote Controls Memory Feature You can program your intelligent access key to recall memory positions. See Memory Function (page 143). REPLACING A LOST KEY OR REMOTE CONTROL Replacement keys or remote controls can be purchased from an authorized dealer. Authorized dealers can program remote controls for your vehicle. See Passive Anti-Theft System (page 75).
MyKey™ PRINCIPLE OF OPERATION MyKey allows you to program keys with restricted driving modes to promote good driving habits. You can program the restrictions to all keys but one. Any keys that you did not program are administrator keys or admin keys. You can use admin keys to: • Create a MyKey with certain vehicle restrictions. • Program certain MyKey settings. • Clear all MyKey restrictions.
MyKey™ Note: Not every feature applies to every vehicle in every market. When they are available for your vehicle, then they appear in your information display, providing choices to switch them on or off, or to select a more specific setting. • • • Various vehicle speed limits so the MyKey driver cannot exceed certain speeds. The information display shows warnings followed by an audible tone when the MyKey driver reaches the set speed.
MyKey™ Programming or Changing Configurable Settings Use the information display to program or change your optional MyKey settings. 1. Switch the ignition on using the key or the transmitter you want to program. 2. Access the main menu in the information display and then scroll through the menus to change the settings of your MyKey. See Information Displays (page 108). 3. Follow the instructions in the display. 4. A confirmation message appears in the display after you finish programming your MyKey.
MyKey™ Number of Admin Keys Indicates how many admin keys are programmed to your vehicle. Use this feature to determine how many admin keys you have for your vehicle, and detect if an additional MyKey has been programmed. USING MYKEY WITH REMOTE START SYSTEMS MyKey is not compatible with non Ford-approved, aftermarket remote start systems. If you choose to install a remote start system, see an authorized dealer for a Ford-approved remote start system.
MyKey™ Condition Potential causes · There are no MyKeys programmed to the vehicle. See Creating a MyKey (page 59). For vehicles with keyless start: No MyKey restrictions are available when starting the vehicle. · An admin transmitter is present when you started your vehicle. · There are no MyKeys programmed to the vehicle. See Creating a MyKey (page 59). I cannot clear the MyKeys. · The key or transmitter used to start the vehicle does not have admin privileges. · No MyKeys are created.
Doors and Locks LOCKING AND UNLOCKING Door Lock Indicator Unlocking the Doors (Two-Stage Unlock) You can use the power door lock or the remote control to lock and unlock your vehicle. An LED on each door window trim lights when you lock the door. It remains on for up to five minutes after you switch the ignition off. Press the button to unlock the driver door. Press the button again E138629 within three seconds to unlock all doors. The direction indicators will flash.
Doors and Locks Press the button again within three seconds to confirm that all the doors are closed. The doors lock again, a tone sounds and the direction indicators flash if all the doors and the luggage compartment are closed. Mislock If any door or the luggage compartment is open, or if the hood is open on vehicles with an anti-theft alarm or remote start, a tone sounds and the direction indicators will not flash. You can switch this feature on or off in the information display.
Doors and Locks Right-Hand Side Locking the Doors Turn counterclockwise to lock. Opening a Rear Door from Inside Pull the interior door handle twice to unlock and open a rear door. The first pull unlocks the door and the second pull will unlatch the door. Activating Intelligent Access The intelligent access key must be within 3 ft (1 m) of the door or luggage compartment you intend to lock or unlock. E146044 The locking sensors are on the front and rear door handles.
Doors and Locks Unlocking the Doors Pull an exterior door handle to unlock and open the door. The unlock sensor is on the back of the handle. Make sure not to touch the lock sensor area on the front of the handle. At the Liftgate Press the exterior liftgate release button inside the top of the liftgate pull-cup handle. Smart Unlocks This feature helps to prevent you from unintentionally locking your intelligent access key inside the passenger compartment or rear cargo area.
Doors and Locks Note: The doors will not autounlock if you electronically lock your vehicle after you switch the ignition off and before you open the driver door. Illuminated Exit Welcome Lighting The interior lamps and select exterior lamps will light when all doors are closed and you switch the ignition off. Enabling or Disabling The lamps turn off if all the doors remain closed and either of the following occurs: • After 25 seconds elapse. • You lock your vehicle from the outside.
Doors and Locks • • You do not start your vehicle for more than five days. The vehicle battery charge is low. Note: When this feature is disabled, you must switch the ignition on to reset it. Note: This feature may not correctly operate if the intelligent access key is stored within 8–15 ft (2.4–4.6 m) of your vehicle while not in use. POWER LIFTGATE WARNINGS It is extremely dangerous to ride in a cargo area, inside or outside of a vehicle.
Doors and Locks Opening and Closing the Liftgate With the Remote Control WARNING Make sure all persons are clear of the power liftgate area before using the power liftgate control. Note: Make sure the area behind your vehicle is free from obstruction and that there is enough room for you to operate the liftgate. Objects too close to your vehicle, for example a wall, garage door or another vehicle may come into contact with the moving liftgate. This could damage the liftgate and its components.
Doors and Locks Note: Allow the power system to open the liftgate. Manually pushing or pulling the liftgate may activate the system’s obstacle detection feature and stop the power operation or reverse its direction. Manually interfering with the liftgate motion may also replicate a strut failure. Closing the Liftgate WARNING Keep clear of the liftgate when activating the rear switch. Stopping the Liftgate Movement Note: Do not apply sudden excessive force to the liftgate while it is in motion.
Doors and Locks Obstacle Detection Hands-Free Feature When Closing Make sure you have an intelligent access transmitter within 3 ft (1 m) of the liftgate. The system stops when it detects an obstacle. Three tones sound and the system reverses to open. Once you remove the obstacle, you can power close the liftgate. Note: Entering your vehicle while the liftgate is closing can cause your vehicle to bounce and activate obstacle detection.
Doors and Locks You can operate the keypad with the factory-set five-digit entry code. The code is located on the owner’s wallet card in the glove box and is available from an authorized dealer. You can also create up to five of your own five-digit personal entry codes. The Keyless Entry Keypad will only work if the driver door is closed and transmission is in park (P).
Doors and Locks Note: Personal entry codes 4 and 5 will not recall memory positions. Erasing a Personal Code • • You switch the ignition on. You unlock the vehicle using intelligent access. 1. Enter the factory-set five-digit code. 2. Press and release 1•2 on the keypad within five seconds. 3. Press and hold 1•2 for two seconds. You must do this within five seconds of completing Step 2. Unlocking and Locking the Doors All personal codes will erase and only the factory-set five-digit code will work.
Doors and Locks 5. Within 10 seconds, place a second programmed intelligent access key in the backup slot and press the push button ignition switch. The factory-set code will appear in the information display for a few seconds. Note: The code may not display until after any other warning messages first display.
Security PASSIVE ANTI-THEFT SYSTEM SecuriLock® Note: The system is not compatible with non-Lincoln aftermarket remote start systems. Use of these systems may result in engine starting problems and a loss of security protection. The system helps prevent the engine from starting unless you use a coded key programmed to your vehicle. Using the wrong key may prevent your vehicle from starting. A message may appear in the information display.
Security Make sure that the ignition is switched off before beginning this procedure. Make sure that you close all the doors before beginning and that they remain closed throughout the procedure. Carry out all steps within 30 seconds of starting the sequence. Stop and wait for at least one minute before starting again if you carry out any steps out of sequence. Read and understand the entire procedure before you begin. 1. Open the center console lid. 3. Press the push button ignition switch. 4.
Security • • • Unlock the doors or luggage compartment with the remote control or keyless entry keypad. Switch your vehicle on or start your vehicle. Use a key in the driver door to unlock your vehicle, then switch your vehicle on within 12 seconds. Note: Pressing the panic button on the remote control will stop the horn and signal indicators, but will not disarm the system.
Steering Wheel ADJUSTING THE STEERING WHEEL WARNING 1. Unlock the steering column. 2. Adjust the steering wheel to the desired position. Power Tilt and Telescope Steering Column (If Equipped) WARNING Do not adjust the steering wheel when your vehicle is moving. Do not adjust the steering wheel when your vehicle is moving. Note: Make sure that you are sitting in the correct position. See Sitting in the Correct Position (page 138). Note: Make sure that you are sitting in the correct position.
Steering Wheel Use the control on the side of the steering column to adjust the position. To adjust: • Tilt: press the top or bottom of the control. • Telescope: press the front or rear of the control. Memory Feature You can save and recall the steering column position with the memory function. See Memory Function (page 143). Pressing the adjustment control during memory recall cancels the operation. The column responds to the adjustment control.
Steering Wheel Press and hold the seek button to: • Tune the radio to the next station up or down the frequency band. • Seek through a track. CRUISE CONTROL Type 2 Type 1 VOICE CONTROL E145977 See Cruise Control (page 210). E145976 INFORMATION DISPLAY CONTROL E145980 A Voice recognition. B End call. C Answer call. See your SYNC information. E145981 See Information Displays (page 108).
Steering Wheel HEATED STEERING WHEEL (If Equipped) See your SYNC information.
Wipers and Washers Intermittent Wipe WINDSHIELD WIPERS Note: Fully defrost the windshield before you switch the windshield wipers on. Note: Make sure you switch the windshield wipers and vehicle power off before using an automatic car wash. Note: If streaks or smears appear on the windshield, clean the windshield and the wiper blades. See Checking the Wiper Blades (page 300). If that does not resolve the issue, install new wiper blades. See Changing the Wiper Blades (page 300).
Wipers and Washers Use the rotary control to adjust the sensitivity of the autowipers. When you select low sensitivity, the wipers will operate when the sensor detects a large amount of water on the windshield. When you select high sensitivity, the wipers will operate when the sensor detects a small amount of water on the windshield. AUTOWIPERS (If Equipped) Note: Fully defrost the windshield before you switch the windshield wipers on.
Wipers and Washers Note: If you switch autolamps on in conjunction with autowipers, your low beam headlamps turn on automatically when the rain sensor activates the windshield wipers continuously. See General Information (page 108). Note: Clean the windshield and wiper blades if they begin to leave streaks or smears. If that does not resolve the issue, install new wiper blades. See Changing the Wiper Blades (page 300). Keep the outside of the windshield clean.
Wipers and Washers When you shift into reverse (R) and the front wipers are on, the rear wiper may automatically turn on to intermittent wipe. Rear Window Washer E197529 Push the lever away from you to operate the rear window washer. When you release the lever, wiping continues for a short period of time.
Lighting GENERAL INFORMATION Condensation in Lamp Assemblies Exterior lamps have vents to accommodate normal changes in air pressure. Condensation can be a natural by-product of this design. When moist air enters the lamp assembly through the vents, there is a possibility that condensation can occur when the temperature is cold. When normal condensation occurs, a fine mist can form on the interior of the lens. The fine mist eventually clears and exits through the vents during normal operation.
Lighting High Beams Headlamp Flasher AUTOLAMPS WARNING E162679 Push the lever forward to switch the high beams on. E162680 Pull the lever toward you slightly and release it to flash the headlamps. The daytime running lamps system does not activate the tail lamps and may not provide adequate lighting during low visibility driving conditions. Also, the autolamps switch position may not activate the headlamps in all low visibility conditions, such as daytime fog.
Lighting When the lighting control is in the autolamps position, the headlamps will automatically turn on in low light situations or when wipers activate. If equipped, the following also activate when the lighting control is in the autolamps position and you switch them on in the information display: • • • Configurable daytime running lamps. Automatic high beam control. Adaptive headlamp control. The headlamps remain on for a period of time after you switch the ignition off.
Lighting HEADLAMP EXIT DELAY After you switch the ignition off, you can switch the headlamps on by pulling the direction indicator lever toward you. You will hear a short tone. The headlamps will switch off automatically after three minutes with any door open or 30 seconds after the last door has been closed. You can cancel this feature by pulling the direction indicator toward you again or switching the ignition on.
Lighting When switched off in the information display, the daytime running lamps are off in all lighting control switch positions. AUTOMATIC HIGH BEAM CONTROL (If Equipped) The system automatically turns on the high beams if it is dark enough and no other traffic is present. When it detects the headlights of an approaching vehicle, the rear lamps of the preceding vehicle or street lighting, the system turns off the high beams before they distract other drivers. The low beams remain on.
Lighting DIRECTION INDICATORS WELCOME LIGHTING The Lincoln welcome mat projection lights are on the bottom of the exterior mirror housings. They will project an image onto the ground a short distance from your vehicle when welcome lighting or lighted entry turns on. For auto-fold mirrors, the Lincoln welcome mat will turn on when welcome lighting or lighted entry turns on and the mirrors have been automatically folded in upon locking or using the switch on the door.
Lighting Rear Interior Lamp (If Equipped) INTERIOR LAMPS The interior lamps turn on when: • You open any door. • You press a remote control button. Front Interior Lamp Note: Touch the door function switch to switch the door function off when you open any door. The indicator lamp will illuminate amber when the door function is off. When the door function is off and you open a door, the courtesy and door lamps will stay off. Touch the switch again to switch the door function back on.
Windows and Mirrors POWER WINDOWS WARNINGS Do not leave children unattended in your vehicle and do not let them play with the power windows. They may seriously injure themselves. When closing the power windows, you should verify they are free of obstructions and make sure that children and pets are not in the proximity of the window openings. Note: You may hear a pulsing noise when just one of the windows is open. Lower the opposite window slightly to reduce this noise. Press the switch to open the window.
Windows and Mirrors Window Lock E144072 Press the control to lock or unlock the rear window controls. It will illuminate when you lock the rear window controls. Accessory Delay You can use the window switches for several minutes after you switch the ignition off or until you open either front door. GLOBAL OPENING AND CLOSING Note: You can switch this feature on and off in the information display or contact an authorized dealer. See General Information (page 108).
Windows and Mirrors Fold-Away Exterior Mirrors Push the mirror toward the door window glass. Make sure that you fully engage the mirror in its support when returning it to its original position. Auto-Folding Mirrors (If Equipped) E144073 A Left-hand mirror. B Adjustment control. C Right-hand mirror. To adjust a mirror: 1. Select the mirror you want to adjust. The control will light. 2. Adjust the position of the mirror. 3. Press the mirror control again.
Windows and Mirrors Loose Mirror Memory Mirrors If your power-folding mirrors are manually folded, they may not work properly even after you re-position them. You need to reset them if: • The mirrors vibrate when you drive. • The mirrors feel loose. • The mirrors do not stay in the folded or unfolded position. • One of the mirrors is not in its normal driving position. You can save and recall the mirror positions through the memory function. See Memory Function (page 143).
Windows and Mirrors C B The image of the approaching vehicle is small and near the inboard edge of the main mirror when it is at a distance. The image becomes larger and begins to move outboard across the main mirror as the vehicle approaches (A). The image will transition from the main mirror and begin to appear in the blind spot mirror as the vehicle approaches (B). The vehicle will transition to your peripheral field of view as it leaves the blind spot mirror (C).
Windows and Mirrors SUN VISORS Illuminated Vanity Mirror (If Equipped) The moonroof and sunscreen controls are on the overhead console and have a one-touch open and close feature. To stop the motion during a one-touch operation, touch the control a second time. E162197 E138666 Rotate the sun visor toward the side window and extend it rearward for extra shade. Lift the cover to switch the lamp on.
Windows and Mirrors Bounce-Back Power Sunscreen The moonroof will stop automatically and reverse some distance if an obstacle is detected while closing. Touch and hold (C) within two seconds of a bounce-back event to override this function. Venting the Moonroof Touch (B) to vent the moonroof. E144499 Touch (C) to close it. E145985 A Open B Vent A Close C Close B Open Touch the associated control to operate the sunscreen. Opening and Closing the Moonroof Touch (A) to open the moonroof.
Windows and Mirrors Note: This position helps to reduce wind noise or rumbling which may happen with the moonroof fully open. Press and hold the control again to fully open the moonroof. Press and release the front of the control to close the moonroof. The sunscreen must be open before opening the moonroof. If you touch the moonroof open control while the sunscreen is in its closed position, the sunscreen will open first followed by the moonroof.
Instrument Cluster GAUGES E170368 101 MKC (TME) Canada/United States of America, enUSA, Edition date: 201601, Second Printing
Instrument Cluster A Tachometer B Information display C Speedometer D Fuel gauge E Engine coolant temperature gauge Information Display After refueling some variability in needle position is normal: Low Fuel Level Reminder Vehicle Settings and Personalization • A low fuel level reminder displays and sounds when the distance to empty reaches 50 mi (80 km) to empty for MyKey, and at 35 mi (60 km), 25 mi (40 km), 10 mi (20 km) and 0 mi (0 km) for all vehicle keys.
Instrument Cluster WARNING Never remove the coolant reservoir cap when the engine is running or hot. WARNING LAMPS AND INDICATORS The following warning lamps and indicators will alert you to a vehicle condition that may become serious. Some lamps will illuminate when you start your vehicle to make sure they work. If any lamps remain on after starting your vehicle, refer to the respective system warning lamp for further information.
Instrument Cluster Brake System E144522 It will illuminate when you engage the parking brake with the ignition on. If it illuminates when you are driving, check that you do not have the parking brake engaged. If you do not have the parking brake engaged, this indicates low brake fluid level or a brake system malfunction. Have the system checked immediately by an authorized dealer. WARNING Driving your vehicle with the warning lamp on is dangerous. A significant decrease in braking performance may occur.
Instrument Cluster Front Airbag If it fails to illuminate when you start your vehicle, continues to flash or remains on, it indicates a malfunction. Have the system checked by an authorized dealer. Heads Up Display (If Equipped) A red beam of lights will illuminate on the windshield in certain E156133 instances when using adaptive cruise control or the collision warning system. It will also illuminate momentarily when you start your vehicle to make sure the display works.
Instrument Cluster Service Engine Soon If the service engine soon indicator light stays illuminated after you start the engine, it indicates that the On Board Diagnostics system (OBD) has detected a malfunction of your vehicle emissions control system. Refer to On board diagnostics (OBD) in the Fuel and Refueling chapter for more information about having your vehicle serviced. See Emission Control System (page 171).
Instrument Cluster Parking Brake On Warning Chime Sounds when you have left the parking brake on and drive your vehicle. If the warning chime remains on after you have released the parking brake, have the system checked by your authorized dealer immediately.
Information Displays GENERAL INFORMATION Information Display Controls WARNING Driving while distracted can result in loss of vehicle control, crash and injury. We strongly recommend that you use extreme caution when using any device that may take your focus off the road. Your primary responsibility is the safe operation of your vehicle. We recommend against the use of any hand-held device while driving and encourage the use of voice-operated systems when possible.
Information Displays Scroll up or down to highlight one of the categories and then press the right arrow key or OK to enter into that category. Press the left arrow key as needed to exit back to the main menu. Trip 1 & 2 E138660 Choose between the standard or enhanced trip display. Note: Some items are optional and may not appear. Trip 1 & 2 Distance to E Normal or Towing Average fuel economy Trip timer Press and hold OK to reset the currently displayed trip information.
Information Displays Fuel Economy Instantaneous Fuel Economy Auto StartStop • • Instantaneous Fuel Economy: This display shows a visual graph of your instantaneous fuel economy. Auto StartStop - Available Auto Start-Stop messaging will provide details about what is happening with your system. See Information Messages (page 114). Driver Assist E144639 Use the up or down arrow buttons to choose between the following display options.
Information Displays Driver Assist Intelligent AWD Lane Keeping Sys Mode Alert, Aid or Alert + Aid Intensity High, Normal or Low Front Park Aid Rear Park Aid Note: Some items are optional and may not appear. Settings E100023 In this mode, you can configure different driver setting choices. Note: Some MyKey items will only appear if a MyKey is set.
Information Displays Settings Auto Engine Off Lighting Auto Highbeam Autolamp Delay Select time interval Daytime Lights Welcome Lighting Locks Autounlock Feedback Audible Exterior Lights Mislock Remote Unlock All Doors or Driver's Door Switches Inhibit Mirror Autofold Oil Life Remaining Life XXX% - Hold OK to Reset Power Liftgate Enable Switch or Disable Switch Remote Start Climate Control Front Seats & Wheel 112 MKC (TME) Canada/United States of America, enUSA, Edition date: 201601, Se
Information Displays Settings Duration System Windows Remote Wipers Courtesy Wipe Rain Sensing MyKey Create MyKey Hold OK to Create MyKey 911 Assist Always On or User Selectable Do Not Disturb Traction Control Max Speed Choose desired speed or off Speed Minder Volume Limiter Display Clear MyKeys Hold OK to Clear All MyKeys Distance Unit Choose your applicable setting 113 MKC (TME) Canada/United States of America, enUSA, Edition date: 201601, Second Printing 5, 10 or 15 minutes
Information Displays Settings Temperature Unit Language Speedo in km/h Press the OK button to acknowledge and remove some messages from the information display. The information display will automatically remove other messages after a short time. INFORMATION MESSAGES Note: Depending on your vehicle options and instrument cluster type, not all of the messages will display or be available. The information display may abbreviate or shorten certain messages.
Information Displays Adaptive Cruise Control Message Action Adaptive Cruise Malfunction A radar malfunction is preventing the adaptive cruise control from engaging. See Using Adaptive Cruise Control (page 211). Adaptive Cruise Not Available A condition exists such that the adaptive cruise cannot function properly. See Using Adaptive Cruise Control (page 211).
Information Displays AdvanceTrac™ Message Action Service AdvanceTrac The system detects a malfunction due to a blocked sensor. AdvanceTrac Off On The driver has disabled or enabled the traction control. Message Action Occupant Sensor BLOCKED Remove Objects Near Passenger Seat The system detects a malfunction due to a blocked sensor. Remove blockage. Airbag Alarm Message Action Vehicle Alarm To Stop Alarm, Start Vehicle. Alarm triggered due to unauthorized entry. See Anti-Theft Alarm (page 76).
Information Displays All-Wheel Drive Message Action AWD Temporarily Disabled The all-wheel drive system temporarily turns off to protect itself from overheating. AWD OFF The all-wheel drive system temporarily turns off to protect itself from overheating or if you are using the temporary spare tire. AWD Restored The all-wheel drive system will resume normal function and clear this message after driving a short distance with the road tire re-installed or after the system cools.
Information Displays Auto Start-Stop Message Action Auto StartStop Press Brake to Start Engine The engine needs to be restarted, press the brake pedal to start. Auto StartStop Press Brake Harder to Activate The engine needs to be restarted, press the brake pedal harder to start. Auto StartStop Press a Pedal to Start Engine The engine needs to be restarted, press any pedal to start. Auto StartStop Select Neutral To Start Engine Select neutral for the system to restart the engine.
Information Displays Battery and Charging System Message Action Check Charging System The charging system needs servicing. If the warning stays on or continues to come on, contact an authorized dealer as soon as possible. Low Battery Features Temporarily Turned The battery management system detects an extended low-voltage condition. Your vehicle will disable various features to help preserve the battery. Turn off as many of the electrical loads as Off soon as possible to improve system voltage.
Information Displays Blind Spot Information and Cross Traffic Alert System Message Action Blindspot System Fault A fault with the system has occurred. Contact an authorized dealer as soon as possible. Blindspot Not Available Sensor Blocked See Manual The system sensors are blocked. See Blind Spot Information System (page 225). Vehicle Coming From X The system detects a vehicle. See Blind Spot Information System (page 225).
Information Displays Doors and Locks Message Action X Door Ajar The door(s) listed is not completely closed. Trunk Ajar The luggage compartment is not completely closed. Hood Ajar The hood is not completely closed. Switches Inhibited Security Mode The system has disabled the door switches. Child Lock Malfunction Service Required There is a system malfunction with the child locks. Contact an authorized dealer as soon as possible.
Information Displays Fuel Message Action Fuel Level Low An early reminder of a low fuel condition. Check Fuel Fill Inlet The fuel fill inlet may not be properly closed. Hill Start Assist Message Action Hill Start Assist Not Available Hill start assist is not available. Contact an authorized dealer. See Auto Hold (page 189). Keys and Intelligent Access Message Action To START Press Brake A reminder to press the brake while starting the vehicle.
Information Displays Message Action Key Program Successful You have successfully programmed an intelligent access key to the system. Key Program Failure You have failed to program an intelligent access key to the system. Max Number of Keys Learned You have programmed the maximum number of keys to the system. Not Enough Keys Learned You have not programmed enough keys to the system. Key Battery Low Replace Soon The key battery is low. Change the battery as soon as possible.
Information Displays Maintenance Message Action Low Engine Oil Pressure Stop your vehicle as soon as safely possible and turn off the engine. Check the oil level. If the warning stays on or continues to come on with your engine running, contact an authorized dealer as soon as possible. Change Engine Oil Soon The engine oil life remaining is 10% or less. See Engine Oil Check (page 292). Oil Change Required The oil life left is at 0%. See Engine Oil Check (page 292).
Information Displays MyKey Message Action MyKey not Created You cannot program a MyKey. MyKey Active Drive Safely MyKey is active. Speed Limited to XX MPH/km/h When switching on your vehicle and MyKey is in use, displays that the MyKey speed limit is on. Near Vehicle Top Speed MyKey is in use and the MyKey speed limit is on and the vehicle speed is approaching 80 mph (130 km/h). Vehicle at Top Speed of MyKey Setting You have reached the speed limit set for your MyKey.
Information Displays Park Aid Message Action Check Front Park Aid The system has detected a condition that requires service. Contact an authorized dealer. See Front Parking Aid (page 197). Check Rear Park Aid The system has detected a condition that requires service. Contact an authorized dealer. See Rear Parking Aid (page 197). Front Park Aid On Off Displays the park aid status. Rear Park Aid On Off Displays the park aid status.
Information Displays Message Action To Release: Press Brake and Switch The electric parking brake is set but you have not released it and your vehicle is moving. Park Brake Limited Function Service Required The electric park brake system has detected a condition that requires service. See an authorized dealer. Park Brake System Overheated You have not released the electric parking brake causing it to overheat. Release Park Brake The electric parking brake is set and you have started your vehicle.
Information Displays Remote Start Message Action To Drive: Press Brake and Gear Shift Button A reminder to apply the brake and push the gearshift button to drive your vehicle after a remote start. Seats Message Action Memory Recall Not Permitted While Driving A reminder that memory seats are not available while driving. Memory {0} Saved Shows where you have saved your memory setting. Starting System Message Action To START Press Brake A reminder to apply the brake when starting your vehicle .
Information Displays Tire Pressure Monitoring System Message Action Tire Pressure Low One or more tires on your vehicle has low tire pressure. See Tire Pressure Monitoring System (page 334). Tire Pressure Monitor Fault The tire pressure monitoring system is malfunctioning. If the warning stays on or continues to come on, contact an authorized dealer. See Tire Pressure Monitoring System (page 334). Tire Pressure Sensor Fault A tire pressure sensor is malfunctioning or your spare tire is in use.
Information Displays Trailer Message Action Trailer Sway Reduce Speed Displays when the trailer sway control has detected a trailer sway. See Trailer Sway Control (page 244). Transmission Message Action Transmission Malfunction Service Now See an authorized dealer. Transmission Overheating Stop Safely The transmission is overheating and needs to cool. Stop in a safe place as soon as possible. Transmission Service Required See an authorized dealer.
Information Displays Message Action Transmission IndicatMode Lockup On The transmission is locked and unable to select gears. Transmission IndicatMode Lockup Off The transmission is unlocked and free to select gears. Invalid Gear Selection You have selected an invalid gear. Press Brake Pedal You need to depress the brake pedal. Depress Brake to Shift from Park You need to depress the brake pedal before you can shift from P park.
Information Displays Message Action SHIFT SYS FAULT Reverse Unavailable Service Required There is a system fault while you are shifting your vehicle to R reverse. See your authorized dealer. SHIFT SYS FAULT Drive Unavailable Select S for Drive Service Required See an authorized dealer. SHIFT SYS FAULT Neutral Unavailable Service Required See an authorized dealer. SHIFT SYS FAULT Neutral Unavailable Service Required See an authorized dealer.
Climate Control AUTOMATIC CLIMATE CONTROL Note: You can switch temperature units between Fahrenheit and Celsius. See your SYNC information.
Climate Control A Driver temperature control: Adjust the temperature setting on the driver side. This control also adjusts the passenger side temperature when you switch off dual zone mode. B Fan speed control: Adjust the volume of air circulated in the vehicle. C Passenger temperature control: Adjust the temperature setting on the passenger side. D MAX A/C: Press for maximum cooling. The driver and passenger temperature settings are set to LO.
Climate Control K Power: Press to switch the system on and off. When the system is off, it prevents outside air from entering the vehicle. L Defrost: Select to distribute air through the windshield air vents. Air distribution to the instrument panel and footwell vents turns off. You can also use this setting to defrost and clear the windshield of a thin covering of ice. M Heated rear window: Press to switch the heated rear window on and off. See Heated Windows and Mirrors (page 136).
Climate Control 2. Adjust the temperature function to the desired setting. Use 72°F (22°C) as a starting point, then adjust the setting as necessary. HEATED WINDOWS AND MIRRORS Heated Exterior Mirrors (If Equipped) Note: Make sure the engine is running before operating the heated windows. Cooling the Interior Quickly Note: Depending on your remote start settings, the heated windows, mirrors and wipers may remain on after remote starting the vehicle.
Climate Control CABIN AIR FILTER REMOTE START Your vehicle is equipped with a cabin air filter, which gives you and your passengers the following benefits: • It improves your driving comfort by reducing particle concentration. • It improves the interior compartment cleanliness. • It protects the climate control components from particle deposits. The system adjusts the interior temperature depending on your chosen settings during remote start.
Seats • SITTING IN THE CORRECT POSITION WARNINGS Sitting improperly, out of position or with the seatback reclined too far can take weight off the seat cushion and affect the decision of the passenger sensing system, resulting in serious injury or death in the event of a crash. Always sit upright against your seat back, with your feet on the floor. Do not recline the seatback as this can cause the occupant to slide under the safety belt, resulting in serious injury in the event of a crash.
Seats WARNINGS The head restraint is a safety device. Whenever possible it should be installed and properly adjusted when the seat is occupied. Failure to adjust the head restraint properly could reduce its effectiveness during certain impacts. Front seat head restraint Install the head restraint properly to help minimize the risk of neck injury in the event of a crash. Note: Adjust the seatback (front seats only) to an upright driving position before adjusting the head restraint.
Seats The rear center head restraint consists of: A An energy absorbing head restraint. B Two steel stems. C Guide sleeve unlock and remove button. Installing the Head Restraint Align the steel stems into the guide sleeves and push the head restraint down until it locks. Folding the Rear Seat Head Restraint Adjusting the Head Restraint 1. Press and hold button E. 2. Pull it back up to reset. Raising the Front Seat Head Restraint Tilting Head Restraints Pull the head restraint up.
Seats POWER SEATS WARNINGS Do not adjust the driver's seat or WARNINGS seatback when your vehicle is moving. Adjusting your seatback while your vehicle is in motion may cause loss of control of your vehicle. 141 MKC (TME) Canada/United States of America, enUSA, Edition date: 201601, Second Printing WARNINGS Do not place cargo or any objects behind the seatback before returning it to the original position.
Seats E144632 142 MKC (TME) Canada/United States of America, enUSA, Edition date: 201601, Second Printing
Seats Power Lumbar This feature will automatically recall the position of the driver seat, power mirrors and optional power steering column. The memory control is located on the driver door. Note: A confirmation that a memory preset is saved will appear in the information display. You can save up to three preset memory positions. You can save a memory preset at any time. Recalling a PreSet Position Press and release the preset button associated with your desired driving position.
Seats You can also recall a preset memory position by: • Pressing the unlock button on your intelligent access key fob if it is linked to a preset position. • Unlocking the intelligent driver door handle if a linked key fob is present. • Entering a personal entry code on the Securicode keypad. See Keyless Entry (page 71). 2. Press and hold the desired preset button for about five seconds. A tone will sound after about two seconds. Continue holding until a second tone is heard. 3.
Seats Folding the Seatback With the seat empty, pull the lever up to fold the seatback forward. You may need to fold the outboard head restraints and lower the center head restraint first. Unfolding the Seatback Pull the seatback upward to unfold the seatback. Recline Adjustment With the seat occupied, pull the lever up to recline the seatback.
Seats Note: Depending on your remote start settings, the heated seats may remain on after you remote start your vehicle. The heated seats may also turn on when you start your vehicle if they were on when your vehicle was turned off. Do not do the following: • Place heavy objects on the seat. • Operate the seat heater if water or any other liquid spills on the seat. Allow the seat to dry thoroughly. Rear Seats (If Equipped) Note: The heated seats will only function when the engine is running.
Seats • • Place heavy objects on the seat. Operate the seat heater if water or any other liquid spills on the seat. Allow the seat to dry thoroughly. Note: The heated seats will only function when the engine is running. Note: Depending on your remote start settings, the heated seats may remain on after you remote start your vehicle. The heated seats may also turn on when you start your vehicle if they were on when your vehicle was turned off.
Universal Garage Door Opener (If Equipped) (If Equipped) HomeLink Wireless Control System WARNINGS Make sure that the garage door and security device are free from obstruction when you are programming. Do not program the system with the vehicle in the garage. Do not use the system with any garage door opener that does not have the safety stop and reverse feature as required by U.S. Federal Safety Standards (this includes any garage door opener manufactured before April 1, 1982).
Universal Garage Door Opener (If Equipped) Note: You may need to use a different method if you live in Canada or have difficulties programming your gate operator or garage door opener. See Gate Operator / Canadian Programming. E142658 1. With your vehicle parked outside of the garage, turn your ignition to the on position, but do not start your vehicle. 2. Hold your hand-held garage door transmitter 2–6 in (5–14 cm) away from the HomeLink button you want to program. 3.
Universal Garage Door Opener (If Equipped) Note: If programming a garage door opener or gate operator, it is advised to unplug the device during the “cycling” process to prevent possible overheating. E142658 3. Press and hold the function button you want to program for 2 seconds, then release. Repeat this step. Depending on your brand of garage door opener, you may need to repeat this sequence a third time.
Universal Garage Door Opener (If Equipped) 2. The indicator light will begin to flash after 20 seconds. Without releasing the button, follow Step 1 in the Programming section. For questions or comments, contact HomeLink at www.homelink.com, www.youtube.com/HomeLinkGentex or 1-800-355-3515. Programming to a Genie Intellicode 2 Garage Door Opener Note: The Genie Intellicode 2 transmitter must already be programmed to operate with the garage door opener.
Universal Garage Door Opener (If Equipped) Programming HomeLink to the Genie Intellicode Garage Door Opener Motor Note: You may need a ladder to access the garage door opener motor. 4. Press and release the Genie Intellicode 2 hand-held transmitter’s previously programmed button. Both indicator lights on the garage door opener motor unit should now flash purple. 5. Press and hold the previously programmed button on the visor for 2 seconds. Repeat this step up to 3 times until the garage door moves.
Auxiliary Power Points 12 Volt DC Power Point WARNINGS Do not plug optional electrical accessories into the cigar lighter socket. Incorrect use of the cigar lighter can cause damage not covered by the vehicle warranty, and can result in fire or serious injury. Do not use a power point for operating a cigar lighter. Incorrect use of the power points can cause damage not covered by the vehicle warranty, and can result in fire or serious injury.
Auxiliary Power Points When the indicator light on the power point is: • On: The power point is working, the ignition is on and a device is plugged in. • Off: The power point is off, the ignition is off or no device is plugged in. • Flashing: The power point is in fault mode. • • Measuring devices, which process precise data, such as medical equipment or measuring equipment.
Storage Compartments CENTER CONSOLE Stow items in the cup holder carefully as items may become loose during hard braking, acceleration or crashes, including hot drinks which may spill. Storage compartment with auxiliary power point. D Auxiliary power point, 110 volt AC power outlet (if equipped). TICKET HOLDERS OVERHEAD CONSOLE Available console features include: A B C C E170447 Slide your toll ticket in the space provided.
Starting and Stopping the Engine GENERAL INFORMATION WARNINGS Extended idling at high engine speeds can produce very high temperatures in the engine and exhaust system, creating the risk of fire or other damage. Do not park, idle or drive your vehicle on dry grass or other dry ground cover. The emission system heats up the engine compartment and exhaust system, creating the risk of fire. Do not start the engine in a closed garage or in other enclosed areas. Exhaust fumes can be toxic.
Starting and Stopping the Engine Note: You may have to press the push button ignition switch twice to switch the ignition on. Start: Starts the engine. • Press the brake pedal, and then press the button for any length of time. An indicator light on the button illuminates when then ignition is on and when the engine starts. Before starting the engine, check the following: • Make sure all occupants have fastened their safety belts. • Make sure the headlamps and electrical accessories are off.
Starting and Stopping the Engine Within 20 seconds of switching the engine off, press the brake pedal and press the button. After 20 seconds have expired, you can no longer restart the engine without the key present inside your vehicle. Once the engine has started, it remains running until you press the button, even if the system does not detect a valid key. If you open and close a door while the engine is running, the system searches for a valid key.
Starting and Stopping the Engine • • • You can reset the timer by interacting with your vehicle (such as pressing the brake pedal or accelerator pedal). You can temporarily switch off the shutdown feature any time the ignition is on (for the current ignition cycle only). Use the information display to do so. See Information Displays (page 108).
Starting and Stopping the Engine ENGINE BLOCK HEATER (If Equipped) WARNINGS Failure to follow engine block heater instructions could result in property damage or serious personal injury. Do not use your heater with ungrounded electrical systems or two-pronged adapters. There is a risk of electrical shock. Do not fully close the hood, or allow it to drop under its own weight when using the engine block heater.
Unique Driving Characteristics AUTO-START-STOP The system helps reduce fuel consumption by automatically shutting off and restarting the engine while your vehicle is stopped. The engine will restart automatically when you release the brake pedal. In some situations, your vehicle may restart automatically, for example: • • To maintain interior comfort To recharge the battery Note: Power assist steering is turned off when the engine is off.
Unique Driving Characteristics If the instrument cluster is equipped with a grey Auto StartStop indicator light, it is illuminated when automatic engine stop is not available due to one of the above noted conditions not being met. • E146361 Automatic Engine Restart • • • The battery is not within optimal operating conditions. The maximum engine off time is exceeded. When you press the Auto StartStop button while the engine is stopped automatically. The heated windshield is turned on.
Unique Driving Characteristics If your vehicle is in an Auto StartStop state and you shift the transmission to reverse while the brake is not depressed, a message telling you to press the brake will appear. You must press the brake pedal within 10 seconds, or a shift to park and a manual restart will be required. Note: If the Shift to P, Restart Engine message appears and the amber Auto StartStop indicator light is flashing, automatic restart is not available. The vehicle must be restarted manually.
Fuel and Refueling SAFETY PRECAUTIONS WARNINGS Do not overfill the fuel tank. The pressure in an overfilled tank may cause leakage and lead to fuel spray and fire. The fuel system may be under pressure. If you hear a hissing sound near the fuel filler inlet, do not refuel until the sound stops. Otherwise, fuel may spray out, which could cause serious personal injury. Fuels can cause serious injury or death if misused or mishandled. Flow of fuel through a fuel pump nozzle can produce static electricity.
Fuel and Refueling • • Fuels can also be harmful if absorbed through the skin. If fuel is splashed on the skin, clothing or both, promptly remove contaminated clothing and wash skin thoroughly with soap and water. Repeated or prolonged skin contact with fuel liquid or vapor causes skin irritation. Be particularly careful if you are taking Antabuse or other forms of Disulfiram for the treatment of alcoholism. Breathing gasoline vapors could cause an adverse reaction, serious personal injury or sickness.
Fuel and Refueling Do not be concerned if the engine sometimes knocks lightly. However, if the engine knocks heavily while using fuel with the recommended octane rating, contact an authorized dealer to prevent any engine damage. FUEL FILLER FUNNEL LOCATION The fuel filler funnel is located in the spare wheel storage tray. RUNNING OUT OF FUEL Running out of fuel can cause damage not covered by the vehicle Warranty. If your vehicle runs out of fuel: • Add a minimum of 1.
Fuel and Refueling Note: Do not use aftermarket funnels as they will not work with the capless fuel system and can damage it. When refueling the vehicle fuel tank from a fuel container, do the following: 1. Fully open the fuel tank filler door until it engages. 2. Fully insert the fuel filler funnel into the fuel tank filler pipe opening. 4. Remove the fuel filler funnel from the fuel tank filler pipe opening. 5. Fully close the fuel tank filler door. 6.
Fuel and Refueling WARNINGS Do not try to pry open or push open the capless fuel system with foreign objects. This could damage the fuel system and its seal and cause injury to you or others. Note: Your vehicle does not have a fuel filler cap. A B C D C Left-hand side. Pull the rear of the fuel tank filler door to open it. D Right-hand side. Pull the rear of the fuel tank filler door to open it. 1. Fully open the fuel tank filler door until it engages. A E206911 A Left-hand side.
Fuel and Refueling Note: When you insert the correct size fuel pump nozzle a spring loaded inhibitor will open. A B 2. Insert the fuel pump nozzle up to the first notch on the nozzle A. Keep it resting on the cover of the fuel tank filler pipe opening. System Warnings (If Equipped) E206912 A E139203 4. Operate the fuel pump nozzle within the area shown. B 3. Hold the fuel pump nozzle in position B when refueling.
Fuel and Refueling 5. Insert a fuel pump nozzle or the fuel filler funnel provided with your vehicle in to the fuel tank filler pipe opening. This action should dislodge any debris that may be preventing the fuel filler inlet from fully closing. Note: If this action corrects the problem the message may not reset immediately. If the message remains and the service engine soon warning lamp appears in the information display, have your vehicle checked as soon as possible.
Fuel and Refueling 2. Each time you fill the fuel tank, record the amount of fuel added. 3. After at least three fill ups, fill the fuel tank and record the current odometer reading. 4. Subtract your initial odometer reading from the current odometer reading. To calculate L/100 km (liters per 100 kilometers) fuel consumption, multiply the liters used by 100, then divide by kilometers traveled. To calculate MPG (miles per gallon) fuel consumption, divide miles traveled by gallons used.
Fuel and Refueling • • Do not turn off the ignition while your vehicle is moving, especially at high speeds. Have the items listed in scheduled maintenance information performed according to the specified schedule. The scheduled maintenance items listed in scheduled maintenance information are essential to the life and performance of your vehicle and to its emissions system.
Fuel and Refueling You can correct these temporary malfunctions by filling the fuel tank with good quality fuel, properly closing the fuel fill inlet or letting the electrical system dry out. After three driving cycles without these or any other temporary malfunctions present, the service engine soon indicator should stay off the next time you start the engine. A driving cycle consists of a cold engine startup followed by mixed city and highway driving. No additional vehicle service is required.
Fuel and Refueling 2. Allow your vehicle to sit for at least eight hours with the ignition off. Then, start the vehicle and complete the above driving cycle. The vehicle must warm up to its normal operating temperature. Once started, do not turn off the vehicle until the above driving cycle is complete. If the vehicle is still not ready for I/M testing, you need to repeat the above driving cycle.
Transmission Every time a gear is selected, the selected button will light up. You will also see the gear selected appear in the instrument cluster. AUTOMATIC TRANSMISSION WARNINGS Always set the parking brake fully and make sure your vehicle is in park (P). Turn the ignition off whenever you leave your vehicle. Do not apply the brake pedal and accelerator pedal simultaneously.
Transmission 3. The gearshift button you select will illuminate and the selected gear will appear in the instrument cluster. 4. Release the brake pedal and your transmission will remain in the selected gear. Note: If you attempt to leave your vehicle while it is in gear, the vehicle will automatically shift into park (P). Safety belt and door monitors determine your intent and make the shift for you. During this time, a message will appear in the information display screen prompting you to make the shift.
Transmission Stay in Neutral mode Entering a Carwash SelectShift Automatic™ Transmission Stay in Neutral mode allows your vehicle to stay in neutral (N) when you exit the vehicle. Your vehicle must be stationary to enter this mode. Note: Always put your vehicle in Stay in Neutral mode when entering an automatic car wash. Failure to do this could result in vehicle damage not covered by warranty. Your SelectShift Automatic transmission gives you the ability to change gears manually.
Transmission Upshifts when accelerating (recommended for best fuel economy) Gear Upshift mph (km/h) From To 1 2 15 mph (24 km/h) 2 3 25 mph (40 km/h) 3 4 40 mph (64 km/h) 4 5 45 mph (72 km/h) 5 6 50 mph (80 km/h) The transmission will automatically upshift if your engine speed is too high or downshift if your engine speed is too low. The instrument cluster will display your currently selected gear.
Transmission WARNINGS When doing this procedure, you will be taking the vehicle out of park which means the vehicle can roll freely. To avoid unwanted vehicle movement, always fully set the parking brake prior to doing this procedure. Use wheel chocks if appropriate. If the parking brake is fully released, but the brake warning lamp remains illuminated, the brakes may not be working properly. See your authorized dealer.
Transmission Automatic Transmission Adaptive Learning This feature increases durability and provides consistent shift feel over the life of your vehicle. A new vehicle or transmission may have firm or soft shifts. This operation will not affect function or durability of your transmission and is normal. Over time, the adaptive learning process will fully update transmission operation. Additionally, the strategy must be relearned whenever the battery is disconnected or a new battery is installed.
All-Wheel Drive (If Equipped) USING ALL-WHEEL DRIVE Note: When a system malfunction is present, a warning message appears in the information display. See Information Messages (page 114). This means the system is not functioning correctly and only front-wheel drive is available. Have your vehicle checked by an authorized dealer. Note: When the system overheats and switches to front-wheel drive, a warning message appears in the information display.
All-Wheel Drive (If Equipped) When driving at slow speeds off road under high load conditions, use a low gear when possible. Low gear operation will maximize the engine and transmission cooling capability. It may be safer to stay on the shoulder of the road and slow down gradually before returning to the road. You may lose control if you do not slow down or if you turn the steering wheel too sharply or abruptly.
All-Wheel Drive (If Equipped) To resume operation, switch the ignition off and allow the system to cool down for a minimum of 15 minutes. After the system has cooled down, you will see a brief message display in the information display. See Information Messages (page 114). When driving at slow speeds in deep sand under high outside temperatures, use a low gear when possible. Low gear operation will maximize the engine and transmission cooling capability.
All-Wheel Drive (If Equipped) Start climbing a steep slope or hill in a low gear rather than downshifting to a low gear from a high gear after you have started your climb. This reduces strain on the engine and the possibility of stalling. If your vehicle stalls, do not try to turn around. Turning could cause the vehicle to roll over. Instead, reverse back to a safe location. Apply just enough power to the wheels to climb the hill.
All-Wheel Drive (If Equipped) Make sure that you allow sufficient distance between your vehicle and other vehicles for stopping. On ice and snow, you should drive more slowly than usual, and consider using one of the lower gears. In emergency stopping situations, steadily apply the brake. Your vehicle has a four wheel anti-lock brake system, do not pump the brake pedal. See Hints on Driving With Anti-Lock Brakes (page 186).
Brakes GENERAL INFORMATION Note: Occasional brake noise is normal. If a metal-to-metal, continuous grinding or continuous squeal sound is present, the brake linings may be worn-out. Have the system checked by an authorized dealer. If your vehicle has continuous vibration or shudder in the steering wheel while braking, have it checked by an authorized dealer. Note: Brake dust may accumulate on the wheels, even under normal driving conditions.
Brakes The anti-lock braking system will not eliminate the risks when: • You drive too closely to the vehicle in front of you. • Your vehicle is hydroplaning. • You take corners too fast. • The road surface is poor. ELECTRIC PARKING BRAKE The electric parking brake replaces the conventional handbrake. The operating switch is located on the instrument panel to the left of the steering wheel. WARNING Always set the parking brake and leave your vehicle with the transmission in position P.
Brakes Applying the electric parking brake when the vehicle is moving WARNINGS Applying the electric parking brake while moving will result in use of the anti-lock braking system. Do not use the electric parking brake system when the vehicle is moving unless the normal brake system is unable to stop the vehicle. With the exception of emergency conditions (for example, the brake pedal does not work or is blocked), do not apply the electric parking brake while the vehicle is moving.
Brakes 1. Pull the switch and hold it in this position. 2. Drive your vehicle, then release the switch when you notice that the engine has developed sufficient driving force. Automatic release - drive away release Your vehicle will automatically release the parking brake if all of the following conditions exist: • The driver door is closed. • The vehicle is accelerated. • There are no faults detected in the parking brake system.
Brakes Switch Auto Hold off during vehicle or trailer towing. Note: Auto Hold turns off every time you power down your vehicle. Note: In case of a malfunction in the system while Auto Hold actively holds the vehicle (for example, low power supply), a message appears in the information display. If you see this message, press the brake pedal immediately. When Auto Hold is off, your vehicle behaves the same as a vehicle without Auto Hold.
Brakes Using Auto Hold 1. Bring your vehicle to a stop by pressing the brake pedal. After coming to a stop, the green Auto Hold (ACTIVE) indicator lamp illuminates in the information display. 2. Release the brake pedal. The Auto Hold (ACTIVE) indicator light remains illuminated in the information display and Auto Hold will hold your vehicle at a stop. 3. When you press the accelerator pedal, Auto Hold releases the brakes and you will be able to drive off.
Traction Control PRINCIPLE OF OPERATION The traction control system helps avoid drive wheel spin and loss of traction. If your vehicle begins to slide, the system applies the brakes to individual wheels and, when needed, reduces engine power at the same time. If the wheels spin when accelerating on slippery or loose surfaces, the system reduces engine power in order to increase traction.
Traction Control • • • Temporarily illuminates on engine start-up. Flashes when a driving condition activates either of the systems. Illuminates if a problem occurs in either of the systems. The stability and traction control off light temporarily illuminates on E130458 engine start-up and stays on when you switch the traction control system off.
Stability Control PRINCIPLE OF OPERATION WARNINGS Vehicle modifications involving braking system, aftermarket roof racks, suspension, steering system, tire construction and wheel and tire size may change the handling characteristics of your vehicle and may adversely affect the performance of the electronic stability control system. In addition, installing any stereo loudspeakers may interfere with and adversely affect the electronic stability control system.
Stability Control Electronic Stability Control USING STABILITY CONTROL The system enhances your vehicle’s ability to prevent skids or lateral slides by applying brakes to one or more of the wheels individually and, if necessary, reducing engine power. Roll Stability Control The system enhances your vehicle’s ability to prevent rollovers by detecting your vehicle’s roll motion and the rate at which it changes by applying the brakes to one or more wheels individually.
Parking Aids PRINCIPLE OF OPERATION WARNINGS To help avoid personal injury, please read and understand the limitations of the system as contained in this section. Sensing is only an aid for some (generally large and fixed) objects when moving on a flat surface at parking speeds.
Parking Aids REAR PARKING AID The rear sensors are only active when the transmission is in reverse (R). As your vehicle moves closer to the obstacle, the rate of the audible warning increases. When the obstacle is less than 12 in (30 cm) away, the warning sounds continuously. If the system detects a stationary or receding object farther than 12 in (30 cm) from the corners of the bumper, the tone sounds for only three seconds. Once the system detects an object approaching, the warning sounds again.
Parking Aids When your vehicle approaches an object, a warning tone sounds. When your vehicle moves closer to an object, the warning tone repeat rate increases. The warning tone sounds continuously when an object is 12 in (30 cm) or less from the front bumper. ACTIVE PARK ASSIST - VEHICLES WITH: ACTIVE PARK ASSIST If the transmission is in reverse (R), the front sensing system provides audio warnings when your vehicle is moving and the detected obstacle is stationary or moving towards your vehicle.
Parking Aids The system may not correctly operate in any of the following conditions: • You use a spare tire or a tire significantly worn more than the other tires. • One or more tires are improperly inflated. • You try to park on a tight curve. • Something passes between the front bumper and the parking space (a pedestrian or cyclist). • The edge of the neighboring parked vehicle is high off the ground (for example, a bus, tow truck or flatbed truck).
Parking Aids E130107 Note: You can also activate the Active Park Assist system after you have already driven partially or completely past a parking space. To do so, press the Active Park button and the system will inform you if you have recently passed a suitable parking space. When the system finds a suitable space, it displays a message and a tone sounds. Stop your vehicle and follow the instructions on the screen.
Parking Aids E130108 When you think your vehicle is properly parked, or you hear a solid tone from the parking aid (accompanied by a display message and a chime), bring your vehicle to a complete stop. When automatic steering is complete, the system displays a message and a tone sounds, indicating that the active park assist process is finished. You are responsible for checking the parking job and making any necessary corrections before leaving your vehicle.
Parking Aids E186193 When the system finds a suitable space, it displays a message and a tone sounds. Stop your vehicle and follow the instructions on the screen. If your vehicle is moving very slowly, you may need to pull forward a short distance before the system is ready to park. Note: You must observe that the selected space remains clear of obstructions at all times during the maneuver. Note: You should drive your vehicle within 5 ft (1.
Parking Aids When you think your vehicle is properly parked, or you hear a solid tone from the parking aid (accompanied by a display message and a chime), bring your vehicle to a complete stop. E186191 When you shift the transmission into reverse (R), with your hands off the wheel (and nothing obstructing its movement), your vehicle steers itself into the space. The system displays instructions to move your vehicle back and forth in the space.
Parking Aids The system determines the clearance to the front and rear of your vehicle and automatically steers your vehicle out of a parallel parking space (hands-free) while you control the accelerator, gearshift and brakes. The system visually and audibly guides you to enter traffic. After the system has directed your vehicle past the adjacent vehicle or object, it guides you to take control of the steering to complete the exit from the parking spot.
Parking Aids The system does not offer a particular space The sensors may be covered (for example, snow, ice or dirt buildup). Covered sensors can affect the system's functionality. There is not enough room in the parking space for your vehicle to safely park. There is not enough space for the parking maneuver on the opposite side of the parking space. The parking space is farther than 5 ft (1.5 m) or closer than 16 in (0.4 m) away.
Parking Aids The system does not position the vehicle where I want in the space A parked vehicle has a high attachment (salt sprayer, snowplow or moving truck bed). The parking space length or position of parked objects changed after your vehicle passed. The temperature around your vehicle changes quickly (driving from a heated garage into the cold, or after leaving a car wash).
Parking Aids Note: The reverse sensing system is not effective at speeds above 3 mph (5 km/h) and may not detect certain angular or moving objects. The system uses three types of guides to help you see what is behind your vehicle: • Active guidelines (if equipped): Show the intended path of your vehicle when reversing. • Fixed guidelines: Show the actual path your vehicle is moving in while reversing in a straight line.
Parking Aids A B C D E D Fixed guideline: Yellow zone E Fixed guideline: Red zone F Rear bumper Active guidelines are only shown with fixed guidelines. To use active guidelines, turn the steering wheel to point the guidelines toward an intended path. If you change the steering wheel position while reversing, your vehicle might deviate from the original intended path. The fixed and active guidelines fade in and out depending on the steering wheel position.
Parking Aids Camera System Settings To access any of the rear view camera system settings, make the following selections in the multifunctional display when the transmission is not in reverse (R): Main Menu The default setting for the rear camera delay is OFF. When shifting the transmission out of reverse (R) and into any gear other than park (P), the camera image remains in the display until: • Your vehicle speed sufficiently increases. • You shift your vehicle into park (P).
Cruise Control 4. The indicator changes color in the information display. PRINCIPLE OF OPERATION Cruise control lets you maintain a set speed without keeping your foot on the accelerator pedal. You can use cruise control when your vehicle speed is greater than 20 mph (30 km/h). Changing the Set Speed Note: If you accelerate by pressing the accelerator pedal, the set speed will not change. When you release the accelerator pedal, your vehicle returns to the speed that you previously set.
Cruise Control Canceling the Set Speed Press CNCL or tap the brake pedal. You will not erase the set speed. Resuming the Set Speed WARNINGS Adaptive cruise control may not detect stationary or slow moving vehicles below 6 mph (10 km/h). Press and release RES. Adaptive cruise control is not a crash warning or avoidance system. Switching Cruise Control Off Adaptive cruise control does not detect pedestrians or objects in the road. Note: You will erase the set speed if you switch the system off.
Cruise Control E144529 E164805 E164805 E145977 The adaptive cruise controls are on the steering wheel. Switching Adaptive Cruise Control On Press and release ON. The indicator, current gap setting and set speed appear in the information display. Setting the Adaptive Cruise Speed 1. Drive to desired speed. 2. Press and release SET+ or SET-. 3. A green indicator light, the current gap setting and your set speed appear in the information display. 4. Take your foot off the accelerator pedal.
Cruise Control WARNINGS Adaptive cruise control only warns of vehicles detected by the radar sensor. In some cases there may be no warning or a delayed warning. You should always apply the brakes when necessary. Failure to do so may result in a crash, serious injury or death. Note: The brakes may emit noise when applied by the system. When a vehicle ahead of you enters the same lane or a slower vehicle is ahead in the same lane, the vehicle speed adjusts to maintain a preset gap distance.
Cruise Control The selected gap appears in the information display as shown by the bars in the image. Adaptive Cruise Control Gap Settings Set speed Graphic display, bars indicated between vehicles Time gap, seconds 62 (100) 1 1 31 (28) Sport. 62 (100) 2 1.4 43 (39) Normal. 62 (100) 3 1.8 55 (50) Normal. 62 (100) 4 2.2 67 (61) Comfort. mph ( km/h) Distance gap Dynamic behavior yd (m) Each time you switch the system on, it selects the last chosen gap setting.
Cruise Control Changing the Set Speed Resuming the Set Speed Hilly Condition Usage • Press and release RES. Your vehicle speed returns to the previously set speed and gap setting. The set speed displays continuously in the information display when the system is active. Note: An audible alarm sounds and the system shuts down if it applies brakes for an extended period of time. This allows the brakes to cool. The system functions normally again when the brakes have cooled.
Cruise Control Detection Issues Detection issues can occur: WARNING On rare occasions, detection issues can occur due to the road infrastructures, for example bridges, tunnels and safety barriers. In these cases, the system may brake late or unexpectedly. At all times, you are responsible for controlling your vehicle, supervising the system and intervening, if required. The radar sensor has a limited field of vision.
Cruise Control System Not Available Blocked Sensor Conditions that can cause the system to deactivate or prevent the system from activating when requested include: • A blocked sensor. • High brake temperature. • A failure in the system or a related system. A message displays if something obstructs the radar signals from the sensor. The sensor is located behind a cover near the driver side of the lower grille.
Cruise Control Due to the nature of radar technology, it is possible to get a blockage warning and not be blocked. This can happen, for example, when driving in sparse rural or desert environments. A false blocked condition either self clears or clears after a key cycle. Switching to Normal Cruise Control WARNING The cruise control indicator light replaces the adaptive cruise E71340 control indicator light if you select normal cruise control.
Driving Aids DRIVER ALERT (If Equipped) WARNING The system is designed to aid the driver. It is not intended to replace your attention and judgment. You are still responsible to drive with due care and attention. Note: The system will store the on or off setting in the information display menu through ignition cycles. The system automatically monitors your driving behavior using various inputs including the front camera sensor.
Driving Aids The current assessment of your alertness is within a typical range. Note: If the camera sensor cannot track the road lane markings or if your vehicle speed drops below approximately 40 mph (64 km/h), the alertness level will change to grey for a short time and the information display will inform you that the system is unavailable. Resetting the System E131359 The current assessment of your alertness indicates that you should rest as soon as safely possible.
Driving Aids Note: If a MyKey® is detected, pressing the button will not affect the on or off status of the system. You can only change the mode and intensity settings. E144813 Aid only – Provides an assistance steering torque input toward the lane center when the system detects an unintended lane departure. Press the button located on the left steering wheel stalk to switch the system on or off. System Settings The system has two optional setting menus available.
Driving Aids Note: The alert and aid diagrams illustrate general zone coverage. They do not indicate the exact zone coverage area. Intensity: This setting affects the intensity of the steering wheel vibration used for the alert and alert + aid modes. This setting is not valid for the aid mode. • • • Low Medium High System Display When you turn the system on, an overhead graphic of a vehicle with lane markings will display in the information display.
Driving Aids • Using the turn signal indicator. • Evasive steering maneuver.
Driving Aids Why is the feature not available (line markings are gray) when I can see the lane markings on the road? Faint lane markings (partial yellow lane markings on concrete roads) Lane width too narrow or too wide Camera not calibrated after a windshield replacement Driving on tight roads or on uneven roads Why does the vehicle not come back into the middle of the lane always, as expected, in the Aid or Aid + Alert mode? High cross winds Large road crown Rough roads, grooves, shoulder drop-offs Hea
Driving Aids BLIND SPOT INFORMATION SYSTEM (If Equipped) WARNING To help avoid injuries, NEVER use the Blind Spot Information System as a replacement for using the interior and exterior mirrors or looking over your shoulder before changing lanes. The Blind Spot Information System is not a replacement for careful driving. A The Blind Spot Information System is designed to aid you in detecting vehicles that may have entered the blind spot zone (A).
Driving Aids The Blind Spot Information System illuminates an amber alert indicator in the outside mirror on the side of your vehicle the approaching vehicle is coming from. When the Blind Spot Information System is alerting on a vehicle and the corresponding turn signal is ON, the Blind Spot Information System alert indicator flashes as an increased warning level. The alert indicator dims when the system detects nighttime darkness.
Driving Aids Note: If your vehicle has a tow bar with a factory equipped trailer tow module and it is towing a trailer, the sensors will automatically turn the Blind Spot Information System off. If your vehicle has a tow bar but no factory equipped trailer tow module, it is recommended to turn the Blind Spot Information System off manually. Operating the Blind Spot Information System with a trailer attached will cause poor system performance.
Driving Aids Cross Traffic Alert is designed to detect vehicles that approach with a speed up to 37 mph (60 km/h). Coverage decreases when the sensors are partially, mostly or fully obstructed. Reversing slowly helps increase the coverage area and effectiveness. E142440 In this first example, the left sensor is only partially obstructed; zone coverage to the right is nearly maximized.
Driving Aids E142441 Zone coverage also decreases when parking at shallow angles. Here, the left sensor is mostly obstructed; zone coverage on that side is severely limited.
Driving Aids System Lights, Messages and Audible Alerts E205199 E142442 The Cross Traffic Alert illuminates an amber alert indicator in the outside mirror on the side of your vehicle the approaching vehicle is coming from. Cross Traffic Alert also sounds an audible alert and a message appears in the information display indicating a vehicle is coming from the right or left. Cross Traffic Alert works with the reverse sensing system that sounds its own series of tones. See Rear Parking Aid (page 197).
Driving Aids There may be certain instances when there is a false alert by the Cross Traffic Alert system that illuminates the alert indicator with no vehicle in the coverage zone. Some amount of false alerts are normal; they are temporary and self-correct. You can also have Cross Traffic Alert switched off permanently at an authorized dealer. Once switched off permanently, the system can only be switched back on at an authorized dealer.
Driving Aids Steering Tips COLLISION WARNING SYSTEM (If If the steering wanders or pulls, check for: • Correct tire pressures. • Uneven tire wear. • Loose or worn suspension components. • Loose or worn steering components. • Improper vehicle alignment. Equipped) Note: A high crown in the road or high crosswinds may also make the steering seem to wander or pull.
Driving Aids The brake support system assists you in reducing any collision speed by pre-charging the brakes. If the risk of collision continues to increases after the audio-visual warning, the brake support prepares the brake system for rapid braking. The system does not automatically activate the brakes, but if the brake pedal is pressed even lightly, the brakes apply full stopping power.
Driving Aids Cause Action The radar sensor cover in the grille is dirty or obstructed Clean the radar sensor cover or remove the obstruction The surface of the radar sensor cover is clean but the message remains in the display Wait a short time. The radar may take several minutes to reset after you remove the obstruction Heavy rain, spray, snow or fog in the air interferes with the radar signals The collision warning system is temporarily disabled.
Driving Aids DRIVE CONTROL (If Equipped) LINCOLN DRIVE CONTROL Lincoln Drive Control delivers the Lincoln driving experience through a suite of sophisticated electronic vehicle systems. These systems continuously monitor your driving inputs and the road conditions to optimize ride comfort, steering, handling, powertrain response and sound. You can preset your preferences for these systems within the information display.
Driving Aids These systems have a range of modes which you can choose from in order to customize your ideal driving experience: • Comfort – Provides a more relaxed driving experience, maximizing comfort. Your steering effort decreases and the suspension movement is more fluid. Comfort mode is ideal when you desire enhanced traveling comfort. • Normal – Delivers a balanced combination of comfortable, controlled ride and confident handling.
Load Carrying REAR UNDER FLOOR STORAGE Cargo Management System (If Equipped) WARNINGS Do not place any objects on the cargo area shade. They may obstruct your vision or strike occupants of your vehicle in a sudden stop or crash. 1. Pull the rear edge of the cargo shade rearward. 2. Secure both ends of the support rod into the retention slots located on the rear quarter trim panels. Use the cargo shade to cover items in the cargo area of your vehicle.
Load Carrying The maximum recommended load is 50 lb (22 kg) for vehicles with a panoramic roof, and 80 lb (36 kg) for vehicles without a panoramic roof. For vehicles with Continuously Controlled Damping suspension, the maximum recommended load is 80 lb (36 kg), regardless of roof type. Evenly distribute the load on the roof rack. Note: Never place loads directly on the roof panel. The intended design of the roof panel is not to directly carry a load. Make sure that you securely fasten the load.
Load Carrying Payload PAYLOAD E143816 Payload is the combined weight of cargo and passengers that your vehicle is carrying. The maximum payload for your vehicle appears on the Tire and Loading label. The label is either on the B-pillar or the edge of the driver door. Vehicles exported outside the US and Canada may not have a tire and loading label. Look for “The combined weight of occupants and cargo should never exceed XXX kg OR XXX lb” for maximum payload.
Load Carrying GAWR (Gross Axle Weight Rating) GAWR is the maximum allowable weight that a single axle (front or rear) can carry. These numbers are on the Safety Compliance Certification label. The label is located on the door hinge pillar, door-latch post, or the door edge that meets the door-latch post, next to the driver seating position. The total load on each axle must never exceed its Gross Axle Weight Rating.
Load Carrying The gross combined weight must never exceed the Gross Combined Weight Rating. Note: For trailer towing information refer to the RV and Trailer Towing Guide available at an authorized dealer. WARNINGS Do not exceed the GVWR or the GAWR specified on the Safety Compliance Certification label. Do not use replacement tires with lower load carrying capacities than the original tires because they may lower your vehicle’s GVWR and GAWR limitations.
Load Carrying 1400 - 1100 - 150 = 150 pounds. Yes, you have enough load capacity in your vehicle to transport four friends and your golf bags. In metric units, the calculation would be: 635 kilograms - (5 x 99 kilograms) - (5 x 13.5 kilograms) = 635 495 - 67.5 = 72.5 kilograms. Suppose your vehicle has a 1400-pound (635-kilogram) cargo and luggage capacity.
Towing TOWING A TRAILER WARNINGS Towing trailers beyond the maximum recommended gross trailer weight exceeds the limit of your vehicle and could result in engine damage, transmission damage, structural damage, loss of vehicle control, vehicle rollover and personal injury. Do not exceed the GVWR or the GAWR specified on the certification label. Note: See Recommended Towing Weights (page 244). Your vehicle may have electrical items, such as fuses or relays, related to towing. See Fuses (page 269).
Towing RV & Trailer Towing Guide Online Website http://www.fleet.ford.com/towing-guides/ TRAILER SWAY CONTROL (If Equipped) WARNING Turning off trailer sway control increases the risk of loss of vehicle control, serious injury or death. Ford does not recommend disabling this feature except in situations where speed reduction may be detrimental (such as hill climbing), the driver has significant trailer towing experience, and can control trailer sway and maintain safe operation.
Towing Note: Certain states require electric trailer brakes for trailers over a specified weight. Be sure to check state regulations for this specified weight. The maximum trailer weights listed may be limited to this specified weight, as the vehicle’s electrical system may not include the wiring connector needed to activate electric trailer brakes.
Towing Powertrain Maximum GCWR Maximum trailer weight 3 7400 lb (3357 kg) 3000 lb (1361 kg) 3 7420 lb (3366 kg) 3000 lb (1361 kg) 2.0L GTDI AWD 2.3L GTDI AWD 1 Calculated with SAE J2807 method. 2 Without trailer towing package. 3 With trailer towing package.
Towing ESSENTIAL TOWING CHECKS Follow these guidelines for safe towing: • Do not tow a trailer until you drive your vehicle at least 1000 miles (1600 kilometers). • Consult your local motor vehicle laws for towing a trailer. • See the instructions included with towing accessories for the proper installation and adjustment specifications. • Service your vehicle more frequently if you tow a trailer. See your scheduled maintenance information.
Towing Trailer lamps are required on most towed vehicles. Make sure all running lights, brake lights, turn signals and hazard lights are working. Before Towing a Trailer Practice turning, stopping and backing up to get the feel of your vehicle-trailer combination before starting on a trip. When turning, make wider turns so the trailer wheels clear curbs and other obstacles. • • • When Towing a Trailer • • • • Do not drive faster than 70 mph (113 km/h) during the first 500 miles (800 kilometers).
Towing Replace the rear axle lubricant anytime you submerge the rear axle in water. Water may contaminate the rear axle lubricant, which is not a normal maintenance inspection item unless there is a possibility of a leak or other axle repair is required. TOWING THE VEHICLE ON FOUR WHEELS Emergency Towing WARNING If your vehicle has a steering wheel lock make sure the ignition is in the accessory or on position when being towed.
Towing Front-wheel drive vehicles CANNOT be flat-towed (all wheels on the ground) as vehicle or transmission damage may occur. You must place the front wheels on a two-wheel tow dolly. If you are using a tow dolly, follow the instructions specified by the equipment provider. All-wheel drive vehicles CANNOT be flat-towed (all wheels on the ground), as vehicle or transmission damage may occur.
Driving Hints BREAKING-IN • You need to break in new tires for approximately 300 miles (480 kilometers). During this time, your vehicle may exhibit some unusual driving characteristics. • Avoid driving too fast during the first 1000 miles (1600 kilometers). Vary your speed frequently and change up through the gears early. Do not labor the engine. • Do not tow during the first 1000 miles (1600 kilometers).
Driving Hints • • • • Driving on flat terrain offers improved fuel economy as compared to driving on hilly terrain. Transmissions give their best fuel economy when operated in the top cruise gear and with steady pressure on the gas pedal. Four-wheel-drive operation (if equipped) is less fuel efficient than two-wheel-drive operation. Close the windows for high-speed driving. Before driving through standing water, check the depth.
Driving Hints WARNINGS Never place floor mats or any other covering in the vehicle foot well that cannot be properly secured to prevent them from moving and interfering with the pedals or the ability to control the vehicle. WARNINGS Failure to properly follow floor mat installation or attachment instructions can potentially cause interference with pedal operation causing a loss of vehicle control. Never place floor mats or any other covering on top of already installed floor mats.
Roadside Emergencies ROADSIDE ASSISTANCE • Vehicles Sold in the United States: Getting Roadside Assistance To fully assist you should you have a vehicle concern, Lincoln Motor Company offers a complimentary roadside assistance program. This program is separate from the New Vehicle Limited Warranty. The service is available: • Throughout the life of the vehicle for original owners. • For six years or 70,000 mi (110,000 km) (whichever comes first) for subsequent owners.
Roadside Emergencies If you need to arrange roadside assistance for yourself, Lincoln Motor Company will reimburse a reasonable amount for towing to the nearest Lincoln dealership within 100 mi (160 km). To obtain reimbursement information, United States clients, call 1-800-521-4140. Customers need to submit their original receipts.
Roadside Emergencies In the event of a moderate to severe collision, this vehicle includes a fuel pump shutoff feature that stops the flow of fuel to the engine. Not every impact will cause a shutoff. Should your vehicle shut off after a collision, you may restart your vehicle. For vehicles equipped with a key system: 1. Switch off the ignition. 2. Switch on the ignition. 3. Repeat Steps 1 and 2 to re-enable the fuel pump. For vehicles equipped with a push button start system: 1.
Roadside Emergencies Note: Do not disconnect the battery of the disabled vehicle as this could damage the vehicle's electrical system. Park the booster vehicle close to the hood of the disabled vehicle, making sure the two vehicles do not touch. Turn all accessories off. 2. Connect the other end of the positive (+) cable to the positive (+) terminal of the assisting battery. 3. Connect the negative (-) cable to the negative (-) terminal of the assisting battery.
Roadside Emergencies WARNING Do not connect the end of the second cable to the negative (-) terminal of the battery to be jumped. A spark may cause an explosion of the gases that surround the battery. 4 Jump Starting 1. Start the engine of the booster vehicle and rev the engine moderately, or press the accelerator gently to keep your engine speed between 2000 and 3000 rpms, as shown in your tachometer. 2. Start the engine of the disabled vehicle. 3.
Roadside Emergencies The horn and indicators will turn off when: • You press the hazard control button. • You press the panic button on the remote entry transmitter (if equipped). • Your vehicle runs out of power. TRANSPORTING THE VEHICLE If you need to have your vehicle towed, contact a professional towing service, or if you are a member of a roadside assistance program, your roadside assistance service provider. We recommend the use of a wheel lift and dollies or flatbed equipment to tow your vehicle.
Roadside Emergencies Front-wheel drive vehicles must have the front wheels placed on a tow dolly when towing your vehicle from the rear using wheel lift equipment. This prevents damage to the transmission. Towing an all-wheel drive vehicle requires that all wheels be off the ground, such as using a wheel lift and dollies or flatbed equipment. This prevents damage to the transmission, all-wheel drive system and vehicle.
Customer Assistance GETTING THE SERVICES YOU NEED Warranty repairs to your vehicle must be performed by an authorized dealer. While any authorized dealer handling your vehicle line provides warranty service, we recommend you return to your selling authorized dealer who wants to ensure your continued satisfaction. Please note that certain warranty repairs require special training and equipment, so not all authorized dealers are authorized to perform all warranty repairs.
Customer Assistance Web Address www.LincolnCanada.com Online Resources Twitter English @LincolnMotorCA Twitter French @LincolnQC Instagram @LincolnMotorCA Facebook /LincolnMotorCA Additional Assistance If you have questions or concerns, or are unsatisfied with the service you are receiving, follow these steps: 1. Contact your Sales Representative or Service Advisor at your selling or servicing authorized dealer. 2.
Customer Assistance vehicle and reimburse the buyer in an amount equal to the actual price paid or payable by the consumer (less a reasonable allowance for consumer use). The consumer has the right to choose whether to receive a refund or replacement vehicle. California Civil Code Section 1793.
Customer Assistance Disputes submitted to the BBB AUTO LINE program are usually decided within forty days after you file your claim with the BBB. You are not bound by the decision, and may reject the decision and proceed to court where all findings of the BBB Auto Line dispute, and decision, are admissible in the court action. Should you choose to accept the BBB AUTO LINE decision, Ford is then bound by the decision, and must comply with the decision within 30 days of receipt of your acceptance letter.
Customer Assistance In the CAMVAP program, impartial third-party arbitrators conduct hearings at mutually convenient times and places in an informal environment. These impartial arbitrators review the positions of the parties, make decisions and, when appropriate, render awards to resolve disputes. CAMVAP decisions are fast, fair, and final as the arbitrator’s award is binding on both you and Ford of Canada. CAMVAP services are available in all Canadian territories and provinces.
Customer Assistance Customer Relationship Center Phone Fax E-mail Asia Pacific N/A N/A apemcrc@ford.com Caribbean and Central America +1 313 594 4857 - expcac@ford.com Ford Middle East FORD 80004443673 971 4 3327 266 menacac@ford.com Lincoln 80004441067 UAE 80004441066 Saudi Arabia 8008443673 Mobily and Zain cell phone users in Saudi 800850078 Puerto Rico and U.S. Virgin Islands +1-800-841-3673 N/A prcac@ford.com Sub-Saharan Africa +1-313-594-4857 +1 313 390 0804 expcac@ford.
Customer Assistance If you buy your vehicle in North America and then relocate to any of the above locations, register your vehicle identification number (VIN) and new address with Ford Global Trade Services by emailing, expcso@ford.com. HELM, INCORPORATED 47911 Halyard Drive Plymouth, Michigan 48170 Attention: Customer Service If you are in another foreign country, contact the nearest authorized dealer.
Customer Assistance To contact NHTSA, you may call the Vehicle Safety Hotline toll-free at 1-888-327-4236 (TTY: 1-800-424-9153); go to http://www.safercar.gov; or write to: Administrator 1200 New Jersey Avenue, Southeast Washington, D.C. 20590 You can also obtain other information about motor vehicle safety from http://www.safercar.gov.
Fuses FUSE SPECIFICATION CHART Pre-Fuse Box The pre-fuse box is in the engine compartment attached to the positive battery post. This box contains several high current fuses. If you need to replace one of these high current fuses, see an authorized dealer. Power Distribution Box WARNINGS Always disconnect the battery before servicing high current fuses. To reduce risk of electrical shock, always replace the cover to the power distribution box before reconnecting the battery or refilling fluid reservoirs.
Fuses E157389 270 MKC (TME) Canada/United States of America, enUSA, Edition date: 201601, Second Printing
Fuses Fuse F7 F8 F9 F10 F11 F12 F13 F14 F15 F16 F17 Fuse amp rating Protected components 2 Anti-lock brake system module. 2 Anti-lock brake system module. 2 Fuel pump relay. 2 Blower motor relay. 2 Run start relay. 2 Powertrain control module relay. 2 Starter relay. 2 Memory seat. 2 Wipers and washers relay. 2 Cooling fan. 2 Cooling fan 1 (600W).
Fuses Fuse Fuse amp rating Protected components 2 Cooling fan 1 (750W). 2 Cooling fan 2 (600W). 2 Cooling fan 2 (750W). 50A F18 40A 50A F19 F20 F21 F22 F23 F24 F25 F26 F27 Anti-lock brake system module run/start. 1 5A 1 Horn relay. 1 Brake pedal switch. 1 Windshield wipers and washer. 20A 10A 25A Run/start relay coil. 1 5A 1 Transmission range control module. 1 Air conditioning clutch relay. 20A 10A Powertrain control module relay coil. 1 5A Washer pump relay.
Fuses Fuse F28 F29 F30 F31 F32 F33 F34 F35 Fuse amp rating Protected components 1 Alternator sensor. 1 Rain sensor. Rear wiper. Washer pump relay coil. 1 Left-hand headlamp. 1 Right-hand headlamp. 1 Vehicle power 1 (powertrain control module). 1 Vehicle power 2 (canister vent solenoid, universal exhausted gas oxygen sensor, variable camshaft timing, catalyst monitor sensor, canister purge solenoid).
Fuses Fuse F38 F39 F40 F41 F42 F43 F44 F45 F46 Fuse amp rating Protected components Voltage quality module run/start (vehicles equipped with stop/start). 1 15A Powertrain control ignition start power - run. 1 5A 1 Electronic power assist steering run/start. 1 Extended power module run/start. 1 Adaptive cruise control. Blind spot information system. Heads-up display. Rear video camera. (vehicles not equipped with stop/start) 10A 10A 10A — Not used. 1 Heated rear window relay coil.
Fuses Fuse Fuse amp rating F47 Electronic transmission pump B+ feed (vehicles equipped with stop/start). 1 30A F48 1 Protected components — Not used. Mini fuse. 2 J-case fuse. Relay Circuits switched R1 Run start. R2 Horn. R3 Fuel pump. R4 Rear window washer pump. R5 Cooling fan relay 3 (750W). R6 Windshield wipers. R7 Cooling fan relay 1 (600W). Cooling fan relay 5 (750W). R8 Starter. R9 Not used.
Fuses Relay Circuits switched R10 Cooling fan relay 4 (750W). R11 Air conditioning clutch. R12 Cooling fan relay 1 (750W). Cooling fan relay 3 (600W). R13 Cooling fan relay 2. R14 Powertrain control module. R15 Heated rear window. Heated wiper park. R16 Blower motor. Passenger Compartment Fuse Box The fuse panel is behind the lower end of the glove box.
Fuses E145984 Fuse 1 2 3 Fuse amp rating Protected components 1 Lighting (ambient, glove box, vanity, dome, cargo). 1 Memory seats. 1 Driver door unlock. 10A 7.
Fuses Fuse 4 5 6 7 8 9 10 11 12 13 Fuse amp rating Protected components Not used (spare). 1 5A Subwoofer amplifier. THX amplifier. 1 20A 2 Not used (spare). 2 Not used (spare). 2 Not used (spare). 2 Not used (spare). 10A 10A 10A 10A 2 Keypad. Power liftgate logic. 2 Not used (spare). 5A 5A 2 Climate control. Gear shift control. Push-button ignition. 2 Cluster. Datalink module logic. Steering column module logic. 7.5A 7.
Fuses Fuse 14 15 16 17 18 19 20 21 22 23 24 Fuse amp rating Protected components 2 Not used (spare). 2 Datalink module. 1 Not used (spare). 10A 10A 15A 2 Cellphone passport module. 2 Not used (spare). 5A 5A 2 Not used (spare). 2 Not used (spare). 7.5A 7.5A 2 Humidity and in-car temperature. 2 Occupant classification system. 5A 5A Delayed accessory (driver window switch, moonroof logic, power inverter logic). 1 10A Central lock and unlock.
Fuses Fuse 25 26 27 28 29 30 31 32 33 34 Fuse amp rating Protected components 1 Driver door (window, mirror). 1 Front passenger door (window, mirror). 1 Moonroof. 1 THX amplifier. 1 Rear driver side door (window). 1 Rear passenger side door (window). 1 Not used (spare). 1 Display. GPS. Radio frequency receiver. Voice control. 1 Radio and active noise control. 1 Run/start bus (fuse #19, 20, 21, 22, 35, 36, 37, circuit breaker).
Fuses Fuse 35 36 37 38 1 Fuse amp rating Protected components Restraints control module. 1 5A Auto-dimming rear view mirror. Continuous control damping suspension. Lane keeping system module. Rear heated seats module. 1 15A 20A All-wheel drive relay. Heated steering wheel. 30A Not used (spare). 1 Micro fuse. 2 Dual micro fuse. Rear Cargo Fuse Box The fuse panel is located in the cargo area on the passenger side. Open the fuse panel cover to gain access to the fuses.
Fuses E228853 282 MKC (TME) Canada/United States of America, enUSA, Edition date: 201601, Second Printing
Fuses Fuse Fuse amp rating F1 — Not used. F2 — Not used. F3 Protected components Hands-free liftgate module. 1 5A F4 — Not used. F5 — Not used. F6 — Not used. F7 F8 F9 F10 F11 F12 F13 Rear heated seats. 2 30A 2 Power cinch latch. Power liftgate. 2 Heated front seats. 2 Trailer tow. 2 Climate control seats. 2 Auxiliary power point - instrument panel. 30A 20A 40A 30A 20A — Not used.
Fuses Fuse Fuse amp rating F14 2 Power seats. 2 Auxiliary power point - inside of floor console. 2 Auxiliary power point - rear of floor console. 30A F15 20A F16 20A F17 — F18 Not used. 2 Auxiliary power point - cargo area. 2 Inverter power outlet. 20A F19 1 Protected components 40A Mini fuse. 2 J-case fuse. Relay R1 Circuits switched Not used.
Fuses If electrical components in the vehicle are not working, a fuse may have blown. Blown fuses are identified by a broken wire within the fuse. Check the appropriate fuses before replacing any electrical components. CHANGING A FUSE Fuses WARNING Always replace a fuse with one that has the specified amperage rating. Using a fuse with a higher amperage rating can cause severe wire damage and could start a fire.
Fuses Fuse Types E207206 Callout Fuse Type A Micro 2 B Micro 3 C Maxi 286 MKC (TME) Canada/United States of America, enUSA, Edition date: 201601, Second Printing
Fuses Callout Fuse Type D Mini E M Case F J Case G J Case Low Profile 287 MKC (TME) Canada/United States of America, enUSA, Edition date: 201601, Second Printing
Maintenance GENERAL INFORMATION Have your vehicle serviced regularly to help maintain its roadworthiness and resale value. There is a large network of authorized dealers that are there to help you with their professional servicing expertise. We believe that their specially trained technicians are best qualified to service your vehicle properly and expertly. They are supported by a wide range of highly specialized tools developed specifically for servicing your vehicle.
Maintenance 2. Go to the front of your vehicle and release the auxiliary latch. 3. Lift the hood until the lift cylinders hold it open. 4. To close the hood, lower the hood and apply closing force as it drops the last 8 to 11 inches (20 to 30 centimeters).
Maintenance UNDER HOOD OVERVIEW A B C H E F G E171684 290 MKC (TME) Canada/United States of America, enUSA, Edition date: 201601, Second Printing D
Maintenance A Engine coolant reservoir B Engine oil dipstick C Engine oil filler cap D Brake fluid reservoir E Battery F Power distribution box G Air filter assembly H Windshield washer fluid reservoir 291 MKC (TME) Canada/United States of America, enUSA, Edition date: 201601, Second Printing
Maintenance ENGINE OIL DIPSTICK A B 3. Remove the dipstick and wipe it with a clean, lint free cloth. Replace the dipstick and remove it again to check the oil level. Adding Engine Oil If the oil level is at the minimum mark, add oil immediately. See Capacities and Specifications (page 346). Do not use supplemental engine oil additives because they are unnecessary and could lead to engine damage that may not be covered by your vehicle warranty.
Maintenance 1. Remove the engine oil filler cap. 2. Add engine oil that meets Ford specifications. See Capacities and Specifications (page 346). 3. Wipe off any spilled oil. 4. Replace the engine oil filler cap. Turn it clockwise until you feel a strong resistance. Note: Do not add oil further than the maximum mark. Oil levels above the maximum mark may cause engine damage. Note: Soak up any spillage with an absorbent cloth immediately.
Maintenance WARNINGS To reduce the risk of personal injury, make sure the engine is cool before unscrewing the coolant pressure relief cap. The cooling system is under pressure; steam and hot liquid can come out forcefully when the cap is loosened slightly. Do not add coolant further than the MAX mark. Note: Automotive fluids are not interchangeable. Do not use engine coolant or windshield washer fluid outside of its specified function and vehicle location.
Maintenance Adding Engine Coolant • • Do not mix different colors or types of coolant in your vehicle. Make sure the correct coolant is used. Mixing of engine coolants may harm your engine’s cooling system. The use of an improper coolant may harm engine and cooling system components and may void the warranty. Use prediluted engine coolant meeting the Ford specification. See Capacities and Specifications (page 346).
Maintenance If you drive in extremely hot climates: • It may be necessary to have a Ford authorized dealer decrease the coolant concentration to 40%. • A coolant concentration of 40% will provide improved overheat protection. Engine coolant concentrations below 40% will decrease the freeze and corrosion protection characteristics of the engine coolant and may cause engine damage.
Maintenance You have limited engine power when in the fail-safe mode, so drive your vehicle with caution. Your vehicle will not be able to maintain high-speed operation and the engine will run rough. Remember that the engine is capable of completely shutting down automatically to prevent engine damage, therefore: 1. Pull off the road as soon as safely possible and switch the engine off. 2. Arrange for your vehicle to be taken to an authorized dealer. 3.
Maintenance To avoid fluid contamination, the reservoir cap must remain in place and fully tight, unless you are adding fluid. Only use fluid that meets Ford specifications. See Capacities and Specifications (page 346). WASHER FLUID CHECK WARNING If you operate your vehicle in temperatures below 40°F (5°C), use washer fluid with antifreeze protection.
Maintenance When a battery replacement is required, you must use a recommended replacement battery that matches the electrical requirements of the vehicle. Note: If your vehicle has a battery cover, after cleaning or replacing the battery, make sure you reinstall it. Note: See an authorized dealer for battery access, testing, or replacement. To make sure the battery management system works correctly, do not connect an electrical device ground connection directly to the battery negative post.
Maintenance Make sure that you dispose of old batteries in an environmentally friendly way. Seek advice from your local authority about recycling old batteries. If storing your vehicle for more than 30 days without recharging the battery, we recommend that you disconnect the battery cables to maintain battery charge for quick starting. CHANGING THE WIPER BLADES You can improve poor wiper quality by cleaning the wiper blades and the windshield.
Maintenance Rear Window Wiper Blade Note: Make sure that the wiper blade locks into place. ADJUSTING THE HEADLAMPS Vertical Aim Adjustment The assembly plant properly aims the headlamps on your vehicle. If your vehicle has been in an accident, have the alignment of your headlamps checked by your authorized dealer. 1. Lift the wiper arm. Note: Do not hold the wiper blade when lifting the wiper arm. 2. Remove the wiper blade. E142592 A 8 feet (2.
Maintenance REMOVING A HEADLAMP To gain access to the headlamp securing bolts and to remove the headlamp assembly, you must first remove the front fascia and front bumper assemblies. We recommend you see an authorized dealer. CHANGING A BULB E142465 E171165 4. On the wall or screen, you will observe a flat zone of high intensity light located at the top of the right hand portion of the beam pattern.
Maintenance Front Direction Indicator The following lamps are LED: • Side direction indicators. • Approach lamp. • Brake and rear lamps. • Rear direction indicators. • Reversing lamps. • Central high mounted brake lamp. 1. Use a suitable tool, for example a screwdriver, to carefully remove the lamp. 2. Remove the lamp. 3. Turn the bulb holder counterclockwise and remove it. 4. Remove the bulb by pulling it straight out. License Plate Lamp BULB SPECIFICATION CHART E171167 2 1. Remove the headlamp.
Maintenance Function Trade number * Headlamp (high intensity discharge) Low/High D3S * Sidemarker - front LED * Park lamp - front LED * Turn lamp - front 7444NA Signal indicator mirror lamp LED Welcome light LED Approach lamp LED * Tail/brake lamp LED * Turn lamp - rear LED * Backup lamp LED License plate lamp W5W * High-mount brake lamp LED * Interior lamps LED * To replace these lamps, see your authorized dealer. To replace instrument panel lights, see your authorized dealer.
Maintenance CHANGING THE ENGINE AIR FILTER WARNING Note: Failure to use the correct air filter element may result in severe engine damage. The customer warranty may be void for any damage to the engine if the correct air filter element is not used. To reduce the risk of vehicle damage and personal burn injuries, do not start your engine with the air cleaner removed. Do not remove the air cleaner while the engine is running.
Maintenance 4. Install the new air filter element. Slide the open end of the air filter element in first, below the tab. Then push the closed end of the air filter into the bottom of the tray. The closed end should fit inside the groove in the tray. The tab of the closed end of the air filter should be oriented down and fit between the forks on the tray as shown at the arrow above. Note: Make sure you align the tab in the air filter element with the fork in the air cleaner assembly tray. 5.
Vehicle Care GENERAL INFORMATION its finishes. CLEANING PRODUCTS Your dealer has many quality products available to clean your vehicle and protect For best results, use the following products or products of equivalent quality: Materials Name Motorcraft® Bug and Tar Remover (U.S.) Motorcraft® Dissolvant de goudron et éliminateur d’insectes (Canada) ZC-42 (U.S. & Canada) Motorcraft® Custom Bright Metal Cleaner (U.S.) Motorcraft® Nettoyant pour métal brillant (Canada) ZC-15 (U.S.
Vehicle Care Name CXC-101 (Canada) Motorcraft® Premium Windshield Wash Concentrate with Bitterant (U.S.) Liquide lave-glace de haute qualité Motorcraft® (Canada) ZC-32-B2 (U.S.) CXC-37-A/B/D/F (Canada) Professional Strength Carpet and Upholstery Cleaner (U.S.) Motorcraft® Nettoyant professionnel pour sellerie et moquette (Canada) ZC-54 (U.S. & Canada) Motorcraft® Spot and Stain Remover Spot and Stain Remover ZC-14 (U.S.) Motorcraft® Ultra-Clear Spray Glass Cleaner (U.S.
Vehicle Care • • Immediately remove fuel spillages, bird droppings, insect deposits and road tar. These may cause damage to your vehicle’s paintwork or trim over time. We recommend Motorcraft Bug and Tar Remover. Remove any exterior accessories, for example antennas, before entering a car wash. Note: Suntan lotions and insect repellents can damage painted surfaces. If these substances come in contact with your vehicle, wash the affected area as soon as possible.
Vehicle Care Under Hood • For removing black rubber marks from under the hood we recommend Motorcraft Wheel and Tire Cleaner or Motorcraft Bug and Tar Remover. WAXING Regular waxing is necessary to protect your car's paint from the elements. We recommend that you wash and wax the painted surface once or twice a year. When washing and waxing, park your vehicle in a shaded area out of direct sunlight. Always wash your vehicle before applying wax. • • • Use a quality wax that does not contain abrasives.
Vehicle Care CLEANING THE WINDOWS AND WIPER BLADES Car wash chemicals and environmental fallout can result in windshield and wiper blade contamination. Dirty windshield and wipers will result in poor windshield wiper operation. Keep the windshield and wiper blades clean to maintain windshield wiper performance. To clean the windshield and wiper blades: • Clean the windshield with a non-abrasive glass cleaner.
Vehicle Care Cleaning Black Label or Presidential Interior (If Equipped) Note: Alcantara microfiber cloth fabric is made of polyester microfiber with micro-porous polyurethane. Using commercially available fabric cleaners can cause permanent damage. Note: Do not use commercially available leather and vinyl cleaning products on Alcantara microfiber cloth fabric. Note: Lincoln Black Label or Presidential vehicles may have Alcantara microfiber cloth fabric on the seats, headliner, floor mats and door panels.
Vehicle Care CLEANING THE INSTRUMENT PANEL AND INSTRUMENT CLUSTER LENS • WARNING • Do not use chemical solvents or strong detergents when cleaning the steering wheel or instrument panel to avoid contamination of the airbag system. • Note: Follow the same procedure as cleaning leather seats for cleaning leather instrument panels and leather interior trim surfaces. See Cleaning Leather Seats (page 314).
Vehicle Care CLEANING LEATHER SEATS (If Equipped) Note: Follow the same procedure as cleaning leather seats for cleaning leather instrument panels and leather interior trim surfaces. For routine cleaning, wipe the surface with a soft, damp cloth and a mild soap and water solution. Dry the area with a clean, soft cloth. For cleaning and removing stains such as dye transfer, use Motorcraft Premium Leather and Vinyl Cleaner or a commercially available leather cleaning product for automotive interiors.
Vehicle Care • • • • Clean the wheels weekly using Motorcraft Wheel and Tire Cleaner. Apply using manufacturer's instructions. Use a sponge to remove heavy deposits of dirt and brake dust accumulation. Rinse thoroughly with a strong stream of water when you have completed the cleaning process. To remove tar and grease, use Motorcraft Bug and Tar Remover. General • • • VEHICLE STORAGE We engineer and test all motor vehicles and their components for reliable, regular driving.
Vehicle Care Cooling system Miscellaneous • • • Protect against freezing temperatures. When removing your vehicle from storage, check coolant fluid level. Confirm that there are no cooling system leaks and that fluid is at the recommended level. • • Make sure all linkages, cables, levers and pins under your vehicle are covered with grease to prevent rust. Move vehicles at least 25 ft (7.5 m) every 15 days to lubricate working parts and prevent corrosion.
Wheels and Tires All-wheel drive system (if equipped) GENERAL INFORMATION WARNING Notice to utility vehicle and truck owners WARNINGS Utility vehicles have a significantly higher rollover rate than other types of vehicles.
Wheels and Tires How your vehicle differs from other vehicles • Sport utility vehicles and trucks can differ from some other vehicles in a few noticeable ways. Your vehicle may be: • • E145299 318 MKC (TME) Canada/United States of America, enUSA, Edition date: 201601, Second Printing Higher - to allow higher load carrying capacity and to allow it to travel over rough terrain without getting hung up or damaging underbody components.
Wheels and Tires As a result of the above dimensional differences, Sport utility vehicles and trucks often will have a higher center of gravity and a greater difference in center of gravity between the loaded and unloaded condition. These differences that make your vehicle so versatile also make it handle differently than an ordinary passenger car.
Wheels and Tires Treadwear The treadwear grade is a comparative rating based on the wear rate of the tire when tested under controlled conditions on a specified government test course. For example, a tire graded 150 would wear 1½ times as well on the government course as a tire graded 100.
Wheels and Tires *Standard load: A class of P-metric or Metric tires designed to carry a maximum load at set pressure. For example: For P-metric tires 35 psi (2.4 bar) or 36 psi (2.5 bar) depending on tires size and for Metric tires 36 psi (2.5 bar). Increasing the inflation pressure beyond this pressure will not increase the tire’s load carrying capability. *Extra load: A class of P-metric or Metric tires designed to carry a heavier maximum load at 42 psi (2.9 bar).
Wheels and Tires Information on P Type Tires C D B E F G H A I J M L K E142543 P215/65R15 95H is an example of a tire size, load index and speed rating. The definitions of these items are listed below. (Note that the tire size, load index and speed rating for your vehicle may be different from this example.) A. P: Indicates a tire, designated by the Tire and Rim Association, that may be used for service on cars, sport utility vehicles, minivans and light trucks.
Wheels and Tires Letter rating Speed rating M 81 mph (130 km/h) N 87 mph (140 km/h) Q 99 mph (159 km/h) R 106 mph (171 km/h) S 112 mph (180 km/h) T 118 mph (190 km/h) U 124 mph (200 km/h) H 130 mph (210 km/h) V 149 mph (240 km/h) Letter rating Speed rating W 168 mph (270 km/h) Y 186 mph (299 km/h) Note: For tires with a maximum speed capability over 149 mph (240 km/h), tire manufacturers sometimes use the letters ZR.
Wheels and Tires K. Maximum Load: Indicates the maximum load in kilograms and pounds that can be carried by the tire. See the Safety Compliance Certification Label (affixed to either the door hinge pillar, door-latch post, or the door edge that meets the door-latch post, next to the driver's seating position), for the correct tire pressure for your vehicle. L.
Wheels and Tires B C A D E142544 B LT type tires have some additional information beyond those of P type tires; these differences are described below. A. LT: Indicates a tire, designated by the Tire and Rim Association, that is intended for service on light trucks. B. Load Range and Load Inflation Limits: Indicates the tire's load-carrying capabilities and its inflation limits. C.
Wheels and Tires A. T: Indicates a type of tire, designated by the Tire and Rim Association, that is intended for temporary service on cars, sport utility vehicles, minivans and light trucks. B. 145: Indicates the nominal width of the tire in millimeters from sidewall edge to sidewall edge. In general, the larger the number, the wider the tire. C. 80: Indicates the aspect ratio which gives the tire's ratio of height to width. Numbers of 70 or lower indicate a short sidewall. D.
Wheels and Tires Always inflate your tires to the Ford recommended inflation pressure even if it is less than the maximum inflation pressure information found on the tire. The Ford recommended tire inflation pressure is found on the Safety Compliance Certification Label (affixed to either the door hinge pillar, door-latch post, or the door edge that meets the door-latch post, next to the driver's seating position), or Tire Label which is located on the B-Pillar or the edge of the driver’s door.
Wheels and Tires Note: If you overfill the tire, release air by pressing on the metal stem in the center of the valve. Then recheck the pressure with your tire gauge. 4. Replace the valve cap. 5. Repeat this procedure for each tire, including the spare. Note: Some spare tires operate at a higher inflation pressure than the other tires. For T type mini-spare tires, see the Dissimilar spare wheel and tire assembly information for a description. Store and maintain at 60 psi (4.15 bar).
Wheels and Tires When the tread is worn down to one sixteenth of an inch (2 mm), tires must be replaced to help prevent your vehicle from skidding and hydroplaning. Built-in treadwear indicators, or wear bars, which look like narrow strips of smooth rubber across the tread will appear on the tire when the tread is worn down to one sixteenth of an inch (2 mm). When the tire tread wears down to the same height as these wear bars, the tire is worn out and must be replaced.
Wheels and Tires Tire Replacement Requirements Your vehicle is equipped with tires designed to provide a safe ride and handling capability. WARNINGS Only use replacement tires and wheels that are the same size, load index, speed rating and type (such as P-metric versus LT-metric or all-season versus all-terrain) as those originally provided by Ford.
Wheels and Tires Important: Remember to replace the wheel valve stems when the road tires are replaced on your vehicle. It is recommended that the two front tires or two rear tires generally be replaced as a pair. The tire pressure sensors mounted in the wheels (originally installed on your vehicle) are not designed to be used in aftermarket wheels. The use of wheels or tires not recommended by Ford Motor Company may affect the operation of your tire pressure monitoring system.
Wheels and Tires Tire and Wheel Alignment Tire Rotation A bad jolt from hitting a curb or pothole can cause the front end of your vehicle to become misaligned or cause damage to your tires. If your vehicle seems to pull to one side when you are driving, the wheels may be out of alignment. Have an authorized dealer check the wheel alignment periodically. Wheel misalignment in the front or the rear can cause uneven and rapid treadwear of your tires and should be corrected by an authorized dealer.
Wheels and Tires Directional tires The tires on your vehicle have all-weather treads to provide traction in rain and snow. However, in some climates, you may need to use snow tires and cables. If you need to use cables, it is recommended that steel wheels (of the same size and specifications) be used, as cables may chip aluminum wheels.
Wheels and Tires TIRE PRESSURE MONITORING SYSTEM WARNING The tire pressure monitoring system is not a substitute for manually checking tire pressures. You should periodically check tire pressures using a pressure gauge. Failure to correctly maintain tire pressures could increase the risk of tire failure, loss of control, vehicle rollover and personal injury.
Wheels and Tires This device complies with Part 15 of the FCC Rules and with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: • This device may not cause harmful interference. • This device must accept any interference received, including interference that may cause undesired operation. Changing Tires With a Tire Pressure Monitoring System Note: Each road tire is equipped with a tire pressure sensor located inside the wheel and tire assembly cavity.
Wheels and Tires When You Believe Your System is Not Operating Properly The main function of the tire pressure monitoring system is to warn you when your tires need air. It can also warn you in the event the system is no longer capable of functioning as intended.
Wheels and Tires Low tire pressure warning light Possible cause Customer action required Solid warning light Tire(s) under-inflated Make sure tires are at the proper pressure. See Inflating your tires in this chapter. After inflating your tires to the manufacturer’s recommended pressure as shown on the Tire Label (located on the edge of driver’s door or the B-Pillar), the vehicle must be driven for at least two minutes over 20 mph (32 km/h) before the light turns off.
Wheels and Tires It may take up to two minutes of driving over 20 mph (32 km/h) for the light to turn off after you have filled your tires to the recommended inflation pressure pressure and activate the system warning light for low tire pressure. If the low tire pressure warning light is on, visually check each tire to verify that no tire is flat. If one or more tires are flat, repair as necessary. Check the air pressure in the road tires.
Wheels and Tires Dissimilar Spare Wheel and Tire Assembly Information WARNING Failure to follow these guidelines could result in an increased risk of loss of vehicle control, injury or death. If you have a dissimilar spare wheel and tire, then it is intended for temporary use only. This means that if you need to use it, you should replace it as soon as possible with a road wheel and tire assembly that is the same size and type as the road tires and wheels that were originally provided by Ford.
Wheels and Tires • • Wet weather driving capability. All-wheel driving capability When driving with the full-size dissimilar spare wheel and tire assembly additional caution should be given to: • Towing a trailer. • Driving vehicles equipped with a camper body. • Driving vehicles with a load on the cargo rack. Drive cautiously when using a full-size dissimilar spare wheel and tire assembly and seek service as soon as possible.
Wheels and Tires Note: If equipped with full wheel covers with exposed wheel nuts, remove the wheel nuts prior to removing the wheel cover or damage to the wheel cover may occur. 11. E145908 E142551 9. Small arrow-shaped marks on the sills show the location of the jacking points. 12. 6. Block the diagonally opposite wheel. 7. Loosen each wheel lug nut one-half turn counterclockwise, but do not remove them until the wheel is raised off the ground.
Wheels and Tires 13. Remove the jack and fully tighten the lug nuts in the order shown. See Technical Specifications (page 344). Stowing the flat tire 1. Put the jack and lug wrench away. Make sure the jack is fastened so it does not rattle when you drive. 2. Unblock the wheels. 3. Stow the flat tire on the floor in the cargo area. Secure with the flat tire retainer strap by following the next steps: E142906 E157926 4. Locate the cargo tie-down near the seatback.
Wheels and Tires E143746 343 MKC (TME) Canada/United States of America, enUSA, Edition date: 201601, Second Printing
Wheels and Tires TECHNICAL SPECIFICATIONS Wheel Lug Nut Torque Specifications WARNING When a wheel is installed, always remove any corrosion, dirt or foreign materials present on the mounting surfaces of the wheel or the surface of the wheel hub, brake drum or brake disc that contacts the wheel. Make sure that any fasteners that attach the rotor to the hub are secured so they do not interfere with the mounting surfaces of the wheel.
Wheels and Tires E145950 A Wheel pilot bore. Inspect the wheel pilot bore and mounting surface prior to installation. Remove any visible corrosion or loose particles.
Capacities and Specifications ENGINE SPECIFICATIONS - 2.0L ECOBOOST™ Measurement Specification Cubic inches. 122 Firing order. 1-3-4-2 Ignition system. Coil on plug Spark plug gap. 0.027-0.031 in. (0.70-0.80 mm) Compression ratio. 9.3:1 A. The long drivebelt is on the first pulley groove closest to the engine. B. The short drivebelt is on the second pulley groove farthest from the engine.
Capacities and Specifications ENGINE SPECIFICATIONS - 2.3L ECOBOOST™ Measurement Specification Cubic inches. 138 Compression ratio. 9.5:1 Spark plug gap. 0.027-0.031 in. (0.70-0.80 mm) A. The long drivebelt is on the first pulley groove closest to the engine. B. The short drivebelt is on the second pulley groove farthest from the engine.
Capacities and Specifications MOTORCRAFT PARTS - 2.0L ECOBOOST™ Component Motorcraft part number Air filter element FA-1908 Oil filter FL-910-S Battery (without start/stop) BXT-48H6-610 Battery (with start/stop) BAGM-48H6-760 Spark plugs SP-537 Cabin air filter FP70 Windshield wiper blade WW-2550 (driver side) WW-1575 (passenger side) WW-1106 (rear window) We recommend Motorcraft replacement parts available at your Ford dealer or at fordparts.com for scheduled maintenance.
Capacities and Specifications MOTORCRAFT PARTS - 2.3L ECOBOOST™ Component Motorcraft part number Air filter element FA-1908 Oil filter FL-910-S Battery BXT-48H6-610 Spark plugs SP-537 Cabin air filter FP70 Windshield wiper blade WW-2550 (driver side) WW-1575 (passenger side) WW-1106 (rear window) We recommend Motorcraft replacement parts available at your Ford dealer or at fordparts.com for scheduled maintenance.
Capacities and Specifications VEHICLE IDENTIFICATION NUMBER VEHICLE CERTIFICATION LABEL The vehicle identification number is located on the left-hand side of the instrument panel. E142477 E142476 Please note that in the graphic, XXXX is representative of your vehicle identification number.
Capacities and Specifications The transmission code is on the Safety Compliance Certification Label. The following table shows the transmission code along with the transmission description.
Capacities and Specifications CAPACITIES AND SPECIFICATIONS - 2.0L ECOBOOST™ Capacities WARNING The air conditioning refrigerant system contains refrigerant under high pressure. Only qualified personnel should service the air conditioning refrigerant system. Opening the air conditioning refrigerant system can cause personal injury. Item Capacity Engine oil (with oil filter) 5.7 qt (5.4 L) Engine coolant 8.6 qt (8.
Capacities and Specifications Item Capacity A/C refrigerant 24 oz (0.68 kg) A/C refrigerant compressor oil 2.7 fl oz (80.32 ml) * Approximate dry fill capacity. Actual amount may vary during fluid changes. Specifications Materials Name Specification Recommended motor oil (U.S.
Capacities and Specifications Name Specification Optional motor oil (Canada): Motorcraft® SAE 5W-30 Synthetic Motor Oil CXO-5W30-LFS12 WSS-M2C946-A Engine coolant (U.S.
Capacities and Specifications Name Specification Power Transfer Unit (PTU) fluid (All Wheel Drive) (Canada): Motorcraft® SAE 75W-140 Synthetic Rear Axle Lubricant CXY-75W140-1L WSL-M2C192-A Automatic transmission fluid (U.S. and Mexico): Motorcraft® MERCON LV Automatic Transmission Fluid XT-10-QLVC WSS-M2C938-A MERCON LV Automatic transmission fluid (Canada): Motorcraft® MERCON LV Automatic Transmission Fluid CXT-10-LV12 WSS-M2C938-A MERCON LV Windshield washer fluid (U.S.
Capacities and Specifications Name Specification A/C refrigerant (Mexico): Motorcraft® R-134a Refrigerant MYN-19 WSH-M17B19-A A/C refrigerant compressor oil: Motorcraft® PAG Refrigerant Compressor Oil YN-12-D WSH-M1C231-B Multi-purpose grease: Motorcraft® Multi-Purpose Grease Spray XL-5-A ESB-M1C93-B Lock cylinders (U.S.
Capacities and Specifications If you use oil and fluids that do not meet the defined specification and viscosity grade, this may lead to: • Component damage which is not covered by the vehicle warranty. • Longer engine cranking periods. • Increased emission levels. • Reduced engine performance. • Reduced fuel economy. • Degraded brake performance. We recommend Motorcraft® motor oil for your vehicle.
Capacities and Specifications CAPACITIES AND SPECIFICATIONS - 2.3L ECOBOOST™ Capacities WARNING The air conditioning refrigerant system contains refrigerant under high pressure. Only qualified personnel should service the air conditioning refrigerant system. Opening the air conditioning refrigerant system can cause personal injury. Item Capacity Engine oil (with oil filter) 5.7 qt (5.4 L) Engine coolant 8.1 qt (7.
Capacities and Specifications Item Capacity A/C refrigerant 24 oz (0.68 kg) A/C refrigerant compressor oil 2.7 fl oz (80.32 ml) * Approximate dry fill capacity. Actual amount may vary during fluid changes. Specifications Materials Name Specification Recommended motor oil (U.S.
Capacities and Specifications Name Specification Optional motor oil (Canada): Motorcraft® SAE 5W-30 Synthetic Motor Oil CXO-5W30-LFS12 WSS-M2C946-A Engine coolant (U.S.
Capacities and Specifications Name Specification Power Transfer Unit (PTU) fluid (Canada): Motorcraft® SAE 75W-140 Synthetic Rear Axle Lubricant CXY-75W140-1L WSL-M2C192-A Automatic transmission fluid (U.S. and Mexico): Motorcraft® MERCON LV Automatic Transmission Fluid XT-10-QLVC WSS-M2C938-A MERCON LV Automatic transmission fluid (Canada): Motorcraft® MERCON LV Automatic Transmission Fluid CXT-10-LV12 WSS-M2C938-A MERCON LV Windshield washer fluid (U.S.
Capacities and Specifications Name Specification A/C refrigerant (Mexico): Motorcraft® R-134a Refrigerant MYN-19 WSH-M17B19-A A/C refrigerant compressor oil: Motorcraft® PAG Refrigerant Compressor Oil YN-12-D WSH-M1C231-B Multi-purpose grease: Motorcraft Multi-Purpose Grease Spray XL-5-A ESB-M1C93-B Lock cylinders (U.S.
Capacities and Specifications If you use oil and fluids that do not meet the defined specification and viscosity grade, this may lead to: • Component damage which is not covered by the vehicle warranty. • Longer engine cranking periods. • Increased emission levels. • Reduced engine performance. • Reduced fuel economy. • Degraded brake performance. We recommend Motorcraft® motor oil for your vehicle.
Audio System GENERAL INFORMATION Radio Frequencies and Reception Factors AM and FM frequencies are established by the Federal Communications Commission (FCC) and the Canadian Radio and Telecommunications Commission (CRTC). Those frequencies are: • AM: 530, 540-1700, 1710 kHz • FM: 87.9-107.7, 107.9 MHz Radio Reception Factors Distance and strength The further you travel from an AM or FM station, the weaker the signal and the weaker the reception.
Audio System Do not expose discs to direct sunlight or heat sources for extended periods. • MP3 and WMA Track and Folder Structure Audio systems capable of recognizing and playing MP3 and WMA individual tracks and folder structures work as follows: • There are two different modes for MP3 and WMA disc playback: MP3 and WMA track mode (system default) and MP3 and WMA folder mode. • MP3 and WMA track mode ignores any folder structure on the MP3 and WMA disc.
Audio System E223457 A CD slot: Insert a CD. B Eject: Press to eject a CD.
Audio System C TUNE: In radio mode, adjust to manually search through the radio frequency band. In SIRIUS mode, the system selects the previous or next channel. If you select a specific category (Jazz, Rock, News, etc.), turn to find the previous or next channel in the selected category. D Seek, Fast Forward and Reverse: In radio mode, select a frequency band and press either button. The system stops at the first station it finds in that direction. In CD mode, press to select the next or previous track.
SYNC™ 3 GENERAL INFORMATION WARNING Driving while distracted can result in loss of vehicle control, crash and injury. We strongly recommend that you use extreme caution when using any device that may take your focus off the road. Your primary responsibility is the safe operation of your vehicle. We recommend against the use of any hand-held device while driving and encourage the use of voice-operated systems when possible.
SYNC™ 3 E205444 369 MKC (TME) Canada/United States of America, enUSA, Edition date: 201601, Second Printing
SYNC™ 3 Item Menu Item Action and Description A Status Bar This bar displays icons and messages pertaining to current system activities including climate settings, voice commands and phone functions such as text messages. B Home This button is available on the main screens. Pressing it takes you to the home screen view. C Clock This shows the current time. You can set the clock manually or have it controlled by the vehicle's GPS location. See Settings (page 438).
SYNC™ 3 E223130 371 MKC (TME) Canada/United States of America, enUSA, Edition date: 201601, Second Printing
SYNC™ 3 Callout Item Description A Driver Temperature This shows the temperature the driver selects through the climate control system. B Heated steering wheel When you activate the heated steering wheel option on the touch screen, this icon displays. It only displays when there is not a physical button for the heated steering wheel. (If equipped) C Passenger Temperature When the passenger's temperature has been adjusted and is no longer linked to the driver's temperature, it displays here.
SYNC™ 3 Callout Item Description K 911 Assist Off This icon displays when 911 Assist is set to off and your phone is connected to SYNC. L Bluetooth Alert The Bluetooth alert icon displays when there is an active Bluetooth alert. M Bluetooth This icon displays to show an active Bluetooth connection. Messages may also appear in the status bar to provide you with notifications. You can select the message to view the associated feature.
SYNC™ 3 Feature Bar Item Navigation (If equipped) Apps Functions Allows you to see your vehicle's location on a virtual road map, get driving directions to your destination and find points of interest along your route. Connect and control SYNC 3 compatible apps running on your iphone or android device. Also, access built-in additional features such as SiriusXM Traffic and Travel Link (if equipped).
SYNC™ 3 Accessing and Adjusting Modes Through Your Vehicle Information Display (If Equipped) Depending on your vehicle and selected options you may be able to control some of the SYNC 3 features on your information display. The features are visible in the center of the display (A).
SYNC™ 3 E185883 You can make the following adjustments using the information display SYNC 3 screen: 376 MKC (TME) Canada/United States of America, enUSA, Edition date: 201601, Second Printing
SYNC™ 3 Option Audio Information Information for current audio playing. Select source. Navigation View current road and speed limit (if information is available). View current route, next turn, time to your destination (depending on cluster level), distance to destination (depending on cluster level), and ability to cancel route. If you do not have an active navigation route programed, the compass is shown.
SYNC™ 3 Note: If your vehicle is not equipped with navigation, compass appears in the display instead of navigation. If you press the right arrow to go into the compass menu, you can see the compass graphic. The compass displays the direction in which the vehicle is traveling, not true direction (for example, if the vehicle is traveling west, the middle of the compass graphic displays west; north displays to the left of west though its true direction is to the right of west).
SYNC™ 3 • • DISP: Switch the display on or off. You can also touch the screen to switch the display back on. Temperature, fan and climate control buttons: Control the temperature, fan speed or settings of the climate control system. See Climate Control (page 133). 911 Assist WARNINGS Unless the 911 Assist setting is set on before a crash, the system will not dial for help which could delay response time, potentially increasing the risk of serious injury or death after a crash.
SYNC™ 3 Website • www.syncmaroute.ca • For important information about airbag deployment and the fuel pump shut-off please see the Supplementary Restrains and Roadside Emergencies sections of your owner manual. To switch 911 Assist on and off please view the settings information. See Settings (page 438). To make sure that 911 Assist works correctly: • SYNC must be powered and working properly at the time of the incident and throughout feature activation and use.
SYNC™ 3 911 Assist May Not Work If • • • Your cellular phone or 911 Assist hardware sustains damage in a crash. The vehicle's battery or the SYNC system has no power. The phone(s) thrown from your vehicle are the ones paired and connected to the system. 911 Assist Privacy Notice When you switch on 911 Assist, it may disclose to emergency services that your vehicle has been in a crash involving the deployment of an airbag or activation of the fuel pump shut-off.
SYNC™ 3 • Screens crowded with information, such as Point of Interest reviews and ratings, SiriusXM Traffic and Travel Link sports scores, movie times or ski conditions. • • Any action that requires you to use a keyboard is restricted, such as entering a navigation destination or editing information. All lists are limited so the user can view fewer entries (such as phone contacts or recent phone call entries). See the following chart for more specific examples.
SYNC™ 3 Creating a SYNC Owner Account Why do I need a SYNC owner account? • • • Essential for keeping up with the latest software and connected features. Access to customer support for any questions you may have. Maintain account permissions. Visit the website to sign up and register. Website www.owner.lincoln.com www.syncmyride.ca www.syncmaroute.ca Lincoln Support. MyLincoln Mobile is supported by Android and iPhone and it is available through the Apple App Store® or Google Play™.
SYNC™ 3 To install the update in your vehicle, remove anything that is plugged in the USB ports on the media hub and plug in the USB drive containing the update. When the USB drive is plugged in, the installation should begin immediately. After a successful installation, the update is available the next time the vehicle is started. Please reference the website for any further actions. Updating Over Wi-Fi To update your System over Wi-Fi your vehicle must be within the range of a Wi-Fi access point.
SYNC™ 3 download continues where it left off at the next Wi-Fi connected opportunity. Upon activation of an update, a banner displays on the touchscreen indicating the system update. Select the icon to see more detail. This icon displays for two ignition cycles. To switch this feature off: Menu Item Settings General Automatic System Updates In this menu selection, you can change the selection for automatic updates to OFF.
SYNC™ 3 HOME SCREEN E205446 386 MKC (TME) Canada/United States of America, enUSA, Edition date: 201601, Second Printing
SYNC™ 3 Item Home screen display A Audio Shows the active media source. If your vehicle does not have navigation, this space contains the compass. B Phone The name of the connected phone appears on the screen. The status of the phone features also appear. This includes signal strength, battery charge, 911 assist setting state (On or Off), text messaging and roaming. C 1 Tile 1 Navigation This map displays your current location or current route in real time.
SYNC™ 3 Voice Command Action and Description Main Menu Brings you to the main menu. Go back Returns you to the previous screen. Cancel Ends the voice session. List of Commands Gives you a list of possible voice commands. ___ List of Commands You can name any feature and the system gives a list of commands available for the feature.
SYNC™ 3 Audio Voice Commands ___ is a dynamic listing, meaning that for audio voice commands it can be the name of a Sirius channel or a channel number, a radio frequency number, or the name of an artist, album, song or a genre. To control the media features, press the voice button and when prompted, say: Voice command Sirius Channel ___ Description 1 You can say the Sirius channel name or number such as "Sirius channel 16".
SYNC™ 3 Voice command Description Play Song ___ Play Audiobook ___ Browse ___ 1 This For USB audio only, you can say the name of an artist, album, or a genre to browse by that selection. Your system must finish indexing before this option is available. For example you can say "Browse The Beatles" or "Browse folk". option may not be available in all markets or may require a subscription. Climate Voice Commands You can control the temperature of the vehicle using voice commands.
SYNC™ 3 Phone Voice Commands You can use voice commands to connect your Bluetooth-enabled phone to the system. Pairing a Phone To pair your phone, press the voice button and when prompted, say: Voice command Description Pair Phone Follow the on-screen instructions to complete the pairing process. See Settings (page 438). Making Calls ___ is a dynamic listing, meaning that for phone voice commands it can be the name of the contact you wish to call or the digits you want to dial.
SYNC™ 3 Please make sure that you are saying the contact name exactly as it appears in your contact list. Once you have provided the digits of the phone number, you can say the following commands: Voice Command Description <0-9> If the full number was not entered with the first command, you can continue saying the number. Dial Tells SYNC 3 to make the phone call. Delete Tells SYNC 3 to erase the last block of digits stated. Clear Tells SYNC 3 to erase the entire number.
SYNC™ 3 Navigation Voice Commands (If Equipped) You can use any of the following commands to set a destination or find a point of interest. Setting a Destination ___ is a dynamic listing, meaning that for navigation voice commands it can be a POI category or an address. You can find an address, a point of interest (POI), or search for points of interest by category: Voice command Description Find an Address Allows you to enter the address search functionality.
SYNC™ 3 In addition, you can say these commands when a route is active: Voice command Description Cancel Route Cancels the current route. Detour Allows you to select an alternate route. Repeat Instruction Repeats the last guidance prompt. Show Route Displays the active route. Where Am I Provides current location. Zoom in Allows you to zoom in on the map. Zoom out Allows you to zoom out from the map.
SYNC™ 3 There are also voice commands that you can use when app(s) are connected to SYNC 3: Voice command Say the name of an app Description At any time, you can say the name of a mobile app to start the mobile app on SYNC 3. Say the name of an app, followed SYNC 3 will list the available voice commands for the specified app if the app is running on SYNC 3. by help SiriusXM Traffic and Travel Link Voice Commands (If Equipped) SiriusXM Traffic and Travel Link may not be available in all markets.
SYNC™ 3 Voice Settings Commands You can say the following commands to access the voice settings: Voice command Description Voice Settings Allows you to enter the voice settings functionality. Interaction Mode Standard Sets standard prompting with longer prompts. Interaction Mode Advanced Sets advanced prompting with shorter prompts. Phone Confirmation On Allows the system to confirm before making a phone call. Phone Confirmation Off The system does not confirm before placing a call.
SYNC™ 3 Note: Depending on the current climate control settings, the fan speed may automatically go down while issuing voice commands or while making and receiving phone calls via SYNC to reduce the amount of background noise in the vehicle. The fan speed will automatically return to normal operation once the voice session ends. Fan speed can also be adjusted normally during a voice session, simply press fan buttons (or turn fan knob) to increase or decrease fan speed to desired setting.
SYNC™ 3 ENTERTAINMENT E205443 398 MKC (TME) Canada/United States of America, enUSA, Edition date: 201601, Second Printing
SYNC™ 3 Message Message and description A Sources B Direct Tune C Presets You can access these options using the touchscreen or voice commands. Sources Press this button to select the source of media you want to listen to. Menu item AM FM SIRIUS 1 CD 1 USB The name of the USB that is plugged in displays here.
SYNC™ 3 Menu item Bluetooth Stereo Apps 1 This If you have SYNC 3 compatible apps on your connected smart phone, they display here as individual source selections. feature may not be available in all markets and requires an active subscription. Once you have entered the station's call numbers, you can select: AM/FM Radio Tuning a Station You can use the tune or seek controls on the radio bezel to select a station.
SYNC™ 3 SIRIUS satellite radio is a subscription-based satellite radio service that broadcasts a variety of music, sports, news, weather, traffic and entertainment programming. Your factory-installed SIRIUS satellite radio system includes hardware and a limited subscription term that begins on the date of sale or lease of your vehicle. See an authorized dealer for availability.
SYNC™ 3 Menu item Replay Action and description Replay audio on the current channel. You can replay approximately 45 minutes of audio as long as you remain tuned to the current station. Changing stations erases the previous audio. Live ALERT When you are in replay mode, you are not able to select a different preset until you return to live audio. Pressing this button returns you to the live broadcast. Save the current song, artist, or team as a favorite.
SYNC™ 3 SIRIUS Satellite Radio Reception Factors and Troubleshooting Potential reception issues Antenna obstructions For optimal reception performance, keep the antenna clear of snow and ice build-up and keep luggage and other materials as far away from the antenna as possible. Terrain Hills, mountains, tall buildings, bridges, tunnels, freeway overpasses, parking garages, dense tree foliage and thunderstorms can interfere with your reception.
SYNC™ 3 Troubleshooting tips Message Cause Action Unsubscribed Channel Your subscription does not include this channel. Contact SIRIUS at 1-888-539-7474 to subscribe to the channel, or tune to another channel. Satellite acquiring signal… The signal is lost from the SIRIUS satellite or SIRIUS The signal is blocked. When you move into an tower to your vehicle antenna. open area, the signal should return. Updating… Update of channel programming in progress. No action required.
SYNC™ 3 HD Radio technology is the digital evolution of analog AM/FM radio. Your system has a special receiver that allows it to receive digital broadcasts (where available) in addition to the analog broadcasts, it already receives. Digital broadcasts provide a better sound quality than analog broadcasts with free, crystal-clear audio and no static or distortion.
SYNC™ 3 When HD Radio broadcasts are active, you can access the following functions: Message Action and description Presets Allows you to save an active channel as a memory preset. Touch and hold a memory preset slot until the sound returns. There is a brief mute while the radio saves the station. Sound returns when the channel saves. When switching to an HD2 or HD3 memory preset, the sound mutes before the digital audio plays, because the system has to reacquire the digital signal.
SYNC™ 3 In order to provide the best possible experience, use the contact form to report any station issues found while listening to a station broadcasting with HD Radio technology. Independent entities own and operate each station. These stations are responsible for ensuring all audio streams and data fields are accurate. Potential station issues Issues Cause Action Echo, stutter, skip or repeat in audio. This is poor time alignment by the radio broadIncrease or decrease in audio caster. volume.
SYNC™ 3 Website http://www.ibiquity.com/automotive/report_radio_station_experiences HD Radio Technology manufactured under license from iBiquity Digital Corp. U.S. and foreign patents. HD Radio and the HD and HD Radio logos are proprietary trademarks of iBiquity Digital Corp. Ford Motor Company and iBiquity Digital Corp. are not responsible for the content sent using HD Radio technology. Content may be changed, added or deleted at any time at the station owner's discretion.
SYNC™ 3 You can use the forward, reverse, pause or play buttons to control the audio playback. Bluetooth Stereo or USB Bluetooth Stereo and USB allow you to access media that you store on your Bluetooth device or USB device such as music, audio books or podcasts.
SYNC™ 3 Button Function Browse If available, displays the list of tracks in the Now Playing playlist. New Search This option, which is available under browse, allows you to play all tracks or to filter the available media into one of the below categories. Play All Playlists Artists Albums Songs Genres Podcasts Audio books Composers A-Z Jump This button allows you to choose a specific letter to view within the category you are browsing.
SYNC™ 3 USB Ports Apps The system supports the use of certain audio apps such as iHeartRadio through a USB or bluetooth-enabled device. Each app gives you different on-screen options depending on the app's content. See Apps (page 434). Supported Media Players, Formats and Metadata Information E211463 The USB ports are in the center console or behind a small access door in the instrument panel.
SYNC™ 3 E224964 412 MKC (TME) Canada/United States of America, enUSA, Edition date: 201601, Second Printing
SYNC™ 3 Callout Item Description A Left-hand front seat temperature: Touch up or down to adjust the temperature. B Heated steering wheel: Touch the heated steering wheel icon to switch the heated steering wheel on and off (if equipped). C Defrost A pop up appears on the screen to display the defrost options. MAX Defrost: Touch the button to maximize defrosting.
SYNC™ 3 Callout Item Description D AUTO Touch the button to switch on automatic operation. Select the desired temperature using the temperature control. The system adjusts fan speed, air distribution, air conditioning operation, and selects outside air or recirculated air to heat or cool the vehicle in order to maintain the desired temperature. E Power Touch the button to switch the system on and off. Switching off the climate control system prevents outside air from entering the vehicle.
SYNC™ 3 Callout J Item Description A/C Touch to switch the air conditioning on or off. Use A/C with recirculated air to improve cooling performance and efficiency. A/C engages automatically in MAX A/C, defrost and footwell/defrost Recirculated air: Touch to switch the recirculated air on or off which may reduce the amount of time needed to cool down the interior and help reduce odors from reaching the interior. Recirculated air also engages automatically when you select MAX A/C.
SYNC™ 3 Pairing Your Cell Phone for the First Time PHONE WARNING Driving while distracted can result in loss of vehicle control, crash and injury. We strongly recommend that you use extreme caution when using any device that may take your focus off the road. Your primary responsibility is the safe operation of your vehicle. We recommend against the use of any hand-held device while driving and encourage the use of voice-operated systems when possible.
SYNC™ 3 At a minimum, most cell phones with Bluetooth wireless technology support the following functions: • Answering an incoming call. • Ending a call. • Dialing a number. • Call waiting notification. • Caller identification. Other features, such as text messaging using Bluetooth and automatic phonebook download, are phone-dependent features. To check your phone’s compatibility, see your phone’s manual or visit the website: Websites owner.lincoln.
SYNC™ 3 E205447 Item A Menu Item Recent Call List Action and Description Displays your recent calls.
SYNC™ 3 Item Menu Item Action and Description You can place a call by selecting an entry from this list. You can also sort the calls by selecting the drop down menu at the top of the screen. You can choose: All B Contacts Incoming Outgoing Missed All of your contacts from your phone display in alphabetical order. A-Z Jump Selecting this button allows you to choose a specific letter to view. C Phone Settings Displays the name of your phone and takes you to the phone settings options.
SYNC™ 3 Making Calls There are many ways to make calls from the SYNC 3 system, including using voice commands. See Using Voice Recognition (page 387). You can use the touchscreen to place calls as well.
SYNC™ 3 To call a number in your contacts, select: Menu Item Contacts Action and Description You can then select the name of the contact you want to call. Any numbers stored for that contact display along with any stored contact photos. You can then select the number that you want to call. The system begins the call. To call a number from your recent calls, select: Menu Item Recent Call List Action and Description You can then select an entry that you want to call. The system begins the call.
SYNC™ 3 Text Messaging Item Item End Call Keypad Immediately end a phone call. You can also press the button on the steering wheel. Mute You can switch the microphone off so the caller does not hear you. Privacy Transfer the call to the cell phone or back to SYNC 3. Press this to access the phone keypad. Note: Downloading and sending text messages using Bluetooth are cell phone-dependent features.
SYNC™ 3 Smartphone Connectivity (If Equipped) SYNC 3 allows you to use Apple CarPlay and Android Auto to access your phone. When you use Apple CarPlay or Android Auto, you can: • Make calls. • Send and receive messages. • Listen to music. • Use your phone's voice assistant. Apple CarPlay and Android Auto disable some SYNC 3 features. Most Apple CarPlay and Android Auto features use mobile data. Apple CarPlay Apple CarPlay requires an iPhone 5 or newer with iOS 7.1 or newer.
SYNC™ 3 To disable this feature from the Settings screen, select: Menu Item Android Auto Preferences Your device is listed if SYNC detects Android Auto. Select the name of your device and select: Disable Note: You may need to slide your Settings screen to the left to select Apple CarPlay Preferences or Android Auto Preferences. To return to SYNC 3, select the speedometer icon in the Android Auto menu bar at the bottom of the touchscreen, and then touch the option to return to SYNC.
SYNC™ 3 E207749 North up (2D map) always shows the northern direction to be upward on the screen. 3D map mode provides an elevated perspective of the map. Adjust this viewing angle and E207748 rotate the map 180 degrees by touching the map twice, and then dragging your finger along the shaded bar with arrows at the bottom of the map. E207751 Re-center the map by pressing this icon whenever you scroll the map away from your vehicle’s current location.
SYNC™ 3 Menu Item Description (number, street, city, state) For example "12 Mainstreet Dearborn MI" Partial Address (number, street) if searching in current state (number, street and zip code (or postal code in Canada)) if searching out of state You can enter unique addresses that contain door number prefixes with or without the prefix. For example, you could enter "6N340 Fairway Lane" or "340 Fairway Lane".
SYNC™ 3 Menu Item Description This is in a decimal degrees format, one to six decimal places are accepted. You are given autocomplete options below the address bar to select as you type. If you do not give an exact destination, a menu displays with your possible selections. Previous Destinations Collections of your last 40 navigation destinations display here. You can select any option from the list to select it as your destination.
SYNC™ 3 Menu Item Favorites Description Favorites include any location you have previously saved. To add Favorites: Add a Favorite Select this button and enter a location into the destination bar. Search Select this option to have the system locate the address you have entered. Save Select this button when the address you have entered appears on the screen. The address saves as a favorite and you see the favorites screen. You can now select this address from the favorites screen.
SYNC™ 3 Menu Item Description Along Route Near Destination In a City Once you have chosen your destination, press: Menu Item Action and Description Save This saves the destination to your favorites. Start This shows you a map of your entire route. You can then choose your route from three different options. Fastest Uses the fastest moving roads possible. Shortest Uses the shortest distance possible. Economical Route Uses the most fuel-efficient route.
SYNC™ 3 Once you have chosen you destination, press: Menu Item Start Action and Description The system uses a variety of screens and prompts to guide you to your destination. During Route guidance, you can press the maneuver arrow icon on the map if you want the system to repeat route guidance instructions. When the system repeats the last guidance instruction, it updates the distance to the next guidance instruction, since it detects that the vehicle is moving.
SYNC™ 3 Button Highway Exit Info Highway exit information displays on the right hand side of the screen during navigation. Points of interest icons display for restaurants, hotels, fuel stations and ATMs when they are present at the exit. You can select the POI icons to receive a listing of specific locations. You can select the POI location as a waypoint or destination if desired. Turn List Only available during an active route. Displays all of the turns on the current route.
SYNC™ 3 Button Detour An alternate route displays in comparison with the current route. Edit Waypoints Only available if you have an active waypoint on your route. See Waypoints later in this section for information on how to set waypoints. Use this button to re-order or remove your waypoints. You can also have the system set the order for you by pressing: Optimize Order To return to your route press: Go Waypoints You can add a waypoint to a navigation route as a destination along your route.
SYNC™ 3 Menu Item Add Waypoint The waypoint list then appears and you are able to re-order all of your waypoints by selecting the menu icon on the right hand side of the location. You can select up to five waypoints.
SYNC™ 3 • • Pool Wi-Fi Attractions include nearby landmarks, amusement parks, historic buildings and more. cityseeker can provide information such as star rating, reviews, hour of operation and admission price. SiriusXM Traffic and Travel Link SiriusXM Traffic and Travel Link is available on vehicles equipped with navigation and only in select markets. You must activate and subscribe to receive SiriusXM Traffic and Travel Link information.
SYNC™ 3 Websites www.syncmaroute.ca Note: Make sure you have an active account for the app that you have downloaded. Some apps will work automatically with no setup. Other apps will want you to configure your personal settings and personalize your experience by creating stations or favorites. We recommend you do this at home or outside of your vehicle. Note: We encourage you to review the smartphone app’s terms of service and privacy policies because Ford is not responsible for your app or its use of data.
SYNC™ 3 App Permissions SiriusXM Traffic and Travel Link (If The system organizes the App permissions into groups. You can grant these group permissions individually. You can change a permission group status any time when not driving, by using the settings menu. While in the settings menu, you can also see the data included in each group.
SYNC™ 3 Menu Item Traffic on Route Traffic Nearby Action and Description Touch these buttons to identify traffic incidents on your route, near your vehicle’s current location or near any of your favorite places, if programmed. Fuel Prices Touch this button to view fuel prices at stations close to your vehicle’s location or on an active navigation route. Movie Listings Touch this button to view nearby movie theaters and their show times, if available.
SYNC™ 3 SETTINGS Under this menu, you can access and adjust the settings for many of the system features. To access additional settings, swipe the screen left or right. Sound Pressing this button allows you to adjust the following: Sound Settings Reset All Returns Treble, Midrange, and Bass sound settings to factory levels. Treble Adjusts the high frequency level. Midrange Adjusts the middle frequency level. Bass Adjusts the low frequency level.
SYNC™ 3 Media Player This button is available when a media device such as a Bluetooth Stereo or USB device is the active audio source. Pressing the button allows you to access the following options for active devices only. Menu Item Podcast Speed Action and Description For some Apple devices, SYNC 3 can adjust the playback speed of podcasts.
SYNC™ 3 Clock To adjust the time, select the up and down arrows on either side of the screen. The arrows on the left adjust the hour and arrows on the right adjust the minute. You can then select AM or PM. Menu Item Action and Description Clock Format Select how time displays. Auto Time Zone Update When active, the clock adjusts to time zone changes. This feature is only available in vehicles with navigation. Reset Clock to GPS Time When selected, the vehicle clock resets to GPS satellite time.
SYNC™ 3 Phone Pair your Bluetooth-enabled phone with the system before using the functions in hands-free mode. Switch on Bluetooth on your device to begin pairing. See your phone’s manual if necessary. 5. The touchscreen indicates when the pairing is successful. 6. Your phone may prompt you to give the system permission to access information. To check your phone’s compatibility, see your phone’s manual or visit the website. 4. The touchscreen indicates when the pairing is successful. 5.
SYNC™ 3 Menu Item Action and Description View Devices You can then select: Add a Bluetooth Device You can add a Bluetooth-enabled device by following the steps in the previous table. You can select a phone by touching the name of the phone on the screen. You then have the following options: Connect Disconnect Depending on the status of the device, you can select either of these options to interact with the selected device. Device Information Allows you to see phone and device information.
SYNC™ 3 Menu Item Action and Description First Name Last Name Re-download Contacts Select this option to re-download your contact list manually. Delete Contacts Select this option to delete the in vehicle contact list. Deleting the in vehicle list does not erase the contact list on the connected phone. Menu Item Action and Description Set Phone Ringtone You can then select: No Ringtone No sound plays when a call comes to your phone.
SYNC™ 3 Menu Item Action and Description Text Messaging You can then select: No Alert (Silence) No sound plays when a message comes to your phone. You can select one of the three available notification sounds. Voice Readout When enabled, a voice prompt alerts you when you receive a new message.
SYNC™ 3 Menu Item Set Emergency Contacts Action and Description You can select up to two numbers from your mobile device's phonebook as emergency contacts for quick access at the end of the 911 Assist call process. Radio This button is available if a Radio source such as AM or FM is the active media source. Pressing the button allows you to access the following features: Menu Item FM HD Radio Action and Description Activation of this feature allows you to listen to HD radio broadcasts.
SYNC™ 3 Navigation You can adjust many of the Navigation preferences by selecting the following menus. Map Preferences Menu Item Action and Description Map Preferences Then select any of the following: 3D City Model When this option is active, the system shows 3D renderings of buildings. Breadcrumbs When enabled, your vehicle’s previously traveled route displays with white dots. POI Icons Enable this feature to display up to 3 POI icons on the navigation map.
SYNC™ 3 Route Preferences Menu Item Second Level Messages, Actions and Descriptions Route Preferences Then select any of the following: Preferred Route Choose to have the system display your chosen route type. Shortest Fastest Eco Always Use ___ Route Bypass route selection in destination programming. The system only calculates one route based on your preferred route setting. When activated, the system uses your selected route type to calculate only one route to the desired destination.
SYNC™ 3 Navigation Preferences Menu Item Action and Description Navigation Preferences Guidance Prompts You can adjust how the system provides prompts. Then select any of the following: Voice and Tones Voice Only Tones Only Mobile Apps You can enable the control of compatible mobile apps running on your Bluetooth or USB device on SYNC 3.
SYNC™ 3 Menu Item Mobile Apps Action and Description On Enable or disable the use of mobile apps on SYNC 3. Disabling mobile apps in the settings menu disables automatic updates and the use of mobile apps on SYNC 3. Off You can view the status of mobile app permissions in the settings menu. Once Mobile Apps is enabled, you have the following options: Update Mobile Apps This provides information on the current state of available app updates.
SYNC™ 3 Menu Item Action and Description Request Update All Apps Grant or deny permissions to all apps at once. There may also be SYNC 3 enabled apps listed under these options. Grant or deny an individual app particular permissions. App permissions are organized into groups. By pressing the info book icon, you can see which signals are included in each group.
SYNC™ 3 Menu Item About Information pertaining to the system and its software. Software Licenses Documentation of the software license for the system. Master Reset Select to restore factory defaults. This erases all personal settings and personal data. Wi-Fi You can adjust the following: Menu Item Action and Description Wi-Fi Enable this option to connect to Wi-Fi for SYNC 3 vehicle software updates. View Available Networks This provides you with a list of available Wi-Fi networks within range.
SYNC™ 3 Ambient Lighting (If Equipped) Vehicle Door Keypad Code Tap a color once to active ambient lighting. This sets the color to the highest intensity. Note: You vehicle may not have all of these features. You can drag the colors up and down to increase or decrease the intensity. You can select the following features to update their settings. Select this button to add or erase a personal door keypad code. To add or erase a personal code, you first need to enter the five-digit factory set code.
SYNC™ 3 Onboard Modem Serial Number (ESN) Selecting this button on the settings menu shows you the ESN number for your system. You need this number for certain registrations such as Satellite Radio. Display To make adjustments using the touchscreen, select: Menu Item Action and Description Brightness Make the screen display brighter or dimmer. Mode You can select: Auto Dim Auto The screen automatically switches between day and night modes based on the outside light level.
SYNC™ 3 Menu Item Advanced Mode Enable this option to remove additional voice prompts and confirmations. Phone Confirmation Enable this option to have the system confirm a contacts name with you before making a call. Voice Command List Enable this option to have the system display a list of available voice commands when the voice button is pressed. Valet Mode Valet mode allows you to lock the system. No information is accessible until the system is unlocked with the correct PIN.
SYNC™ 3 Cell phone issues Issue Possible cause Possible solution There is background noise The audio control settings on your cell during a phone call. phone may be affecting SYNC 3 performance. Refer to your device's manual about audio adjustments. Try switching your cell phone off, resetting it or removing the battery, then try again. During a call, I can hear the other person but they Possible cell phone malfunction. cannot hear me. Make sure that the microphone for SYNC 3 is not set to off.
SYNC™ 3 Cell phone issues Issue Possible cause Possible solution The system says "Phonebook downloaded" but my Limitations on your cell phone's capabSYNC 3 phonebook is ility. empty or is missing contacts. This is a cell phone-dependent feature. Make sure you allow SYNC 3 to retrieve contacts from your phone. Refer to your cell manual. If the missing contacts are stored on your SIM card, move them to your cell phone's memory.
SYNC™ 3 Cell phone issues Issue Possible cause iPhone Possible solution • • • • • Go to your cell phone's Settings. Go to the Bluetooth Menu. Press the blue circle to the right of the device named with your vehicle make and model to enter the next menu. Turn Show Notifications on. Disconnect then reconnect your iPhone from the SYNC 3 system to activate this settings update. Your iPhone is now set up to forward incoming text messages to SYNC 3.
SYNC™ 3 Cell phone issues Issue Possible cause Possible solution Text messages from WhatsApp and Facebook Messenger are not supported. Audible text messages do not work on my cell phone. This is a cell phone-dependent feature. Your cell phone must support downloading text messages through Bluetooth to receive incoming text messages. This is a cell phone limitation. Because each cell phone is different, refer to your device's manual for the specific cell phone you are pairing.
SYNC™ 3 USB and Bluetooth Stereo issues Issue Possible cause Possible solution The device has a lock screen enabled. Make sure your device is unlocked before connecting it to SYNC 3. SYNC 3 does not recognize my device when I start This is a device limitation. my vehicle. Bluetooth audio does not stream. SYNC 3 does not recognize music that is on my device. Make sure you are not leaving the device in your vehicle during very hot or cold temperatures. This is a device-dependent feature.
SYNC™ 3 USB and Bluetooth Stereo issues Issue Possible cause Possible solution Disconnect the device from SYNC 3. Try switching your device off, resetting it or removing the battery, then connect it back to SYNC 3. When I connect my device, I sometimes do not hear This is a device limitation. any sound. To listen to Apple devices through USB, select AirPlay from the devices Control Center, then select Dock Connector.
SYNC™ 3 Wi-Fi Issues Issue Disconnecting after successful connection. Possible cause Possible solution Weak signal probably due to distance from Position the vehicle close to the hotspot with the hotspot, obstruction or high interference. the front of the vehicle facing the hotspot direction and remove obstacles if possible. Other Wi-Fi, Bluetooth, microwave and cordless phones may cause interference.
SYNC™ 3 Wi-Fi Issues Issue Possible cause SYNC 3 is not seen when searching for Wi-Fi SYNC 3 does not provide a hotspot. networks from your phone or other devices. Software download takes too long. SYNC 3 currently does not provide a hotspot. Poor signal strength, too far from the hotspot, Check the signal quality (under network hotspot is supporting multiple connections, details), if SYNC 3 indicates good or excellent, slow Internet connection or other problems.
SYNC™ 3 AppLink issues Issue Possible cause(s) Possible solution(s) AppLink Mobile Applications: When I select You did not connect an Applink Compatible "Connect Mobile Apps," SYNC 3 does not find phone to SYNC 3. any applications. Make sure you have a compatible smartphone; an Android with OS 2.3 or higher or an iPhone 3GS or newer with iOS 5.0 or higher. Additionally, make sure you pair and connect your phone to SYNC 3 in order to find AppLinkcapable apps on your device.
SYNC™ 3 AppLink issues Issue Possible cause(s) Possible solution(s) and select 'Apps', then find the particular app and choose 'Force stop'. Do not forget to restart the app afterward, then select "Connect Mobile Apps" on SYNC 3. On an iPhone with iOS7+, to force close an app, double tap the home button then swipe up on the app to close it. Tap the home button again, then select the app again to restart it. After a few seconds, the app should then appear in SYNC 3's Mobile App's Menu.
SYNC™ 3 AppLink issues Issue Possible cause(s) My iPhone is connected, my app is running, I You may need to reset the USB connection restarted the app but I still cannot find it on to SYNC 3. SYNC 3. Possible solution(s) Unplug the USB cable from the phone, wait a moment, and plug the USB cable back in to the phone. After a few seconds, the app should appear in SYNC 3's Mobile Apps Menu. If not, "Force Close" the application and restart it.
SYNC™ 3 Voice command issues Issue SYNC 3 does not understand what I am saying. Possible cause You may be using the wrong voice commands. Possible solution Review the cell phone voice commands and the media voice commands at the beginning of their respective sections. Refer to the audio display during an active voice session to find a list of voice commands there. You may be speaking too soon or at the Wait for the system to prompt you before you state your command. wrong time.
SYNC™ 3 Voice command issues Issue Possible cause Possible solution SYNC 3 does not under- You may not be saying the name exactly as it appears on your phonebook. stand or is calling the wrong contact when I want The contact name may contain special to make a call. characters. Make sure that you are saying the name exactly as it appears on your phone. For example, if your contact is "Joe Wilson", say "Call Joe Wilson". If your contact name is "Mom", say "Call Mom".
SYNC™ 3 Voice command issues Issue Possible cause Possible solution The SYNC 3 voice control system is having trouble recognizing foreign tracks, You may be saying the foreign names artists, albums, genres and using the currently selected language for playlist names from my SYNC 3. media player or USB flash drive. The system generates voice prompts and the SYNC 3 uses text-to-speech voice prompt pronunciation of some technology. words may not be accurate for my language.
SYNC™ 3 General Issue The language selected for the instrument cluster and information and entertainment display does not match the SYNC 3 language (phone, USB, Bluetooth audio, voice control and voice prompts). Possible cause Possible solution SYNC 3 only supports four languages in a single module for text display, voice control and voice prompts. The country where you bought your vehicle dictates the four languages based on the most popular languages spoken.
SYNC™ 3 For additional assistance with SYNC 3 troubleshooting please call or visit the Lincoln Website. Lincoln Support Customer Relationship Center United States: 1-800-521-4140 Canada: 1-800-387-9333 Website owner.lincoln.com www.syncmyride.ca www.syncmaroute.
Accessories For a complete listing of the accessories that are available for your vehicle, please contact your authorized dealer or visit our online store at: Web Address (United States) www.Accessories.Lincoln.com Web Address (Canada) www.LincolnCanada.com Lincoln Accessories are available for your vehicle through an authorized Lincoln dealer.
Accessories For maximum vehicle performance, keep the following information in mind when adding accessories, equipment, passengers and luggage to your vehicle: • Do not exceed the total weight capacity of the vehicle or of the front or rear axle (GVWR or GAWR as indicated on the Safety Compliance Certification label). Consult an authorized dealer for specific weight information.
Lincoln Protect PROTECT YOURSELF FROM THE RISING COST OF VEHICLE REPAIRS WITH LINCOLN PROTECT EXTENDED SERVICE PLAN. Lincoln Protect Extended Service Plans (U.S. Only) Lincoln Protect means peace of mind. It’s the extended service plan backed by the Lincoln Motor Company, and provides more protection beyond the New Vehicle Limited Warranty coverage.
Lincoln Protect Less Cost to Properly Maintain Your Vehicle Interest Free Finance Options Lincoln Protect also offers a Premium Maintenance Plan that covers all scheduled maintenance, and selected wear items. The coverage is prepaid, so you never have to worry about the cost of your vehicle’s maintenance.
Lincoln Protect This information is subject to change. For more information, visit your local Lincoln of Canada dealer or www.Lincoln.ca to find the Lincoln Extended Service Plan that is right for you.
Scheduled Maintenance GENERAL MAINTENANCE INFORMATION Failure to perform scheduled maintenance invalidates warranty coverage on parts affected by the lack of maintenance. Why Maintain Your Vehicle? Why Maintain Your Vehicle at Your Dealership? Carefully following the maintenance schedule helps protect against major repair expenses resulting from neglect or inadequate maintenance and may help to increase the value of your vehicle when you sell or trade it.
Scheduled Maintenance Your vehicle is equipped with the Intelligent Oil-Life Monitor system, which displays a message in the information display at the proper oil change interval. This interval may be up to one year or 10000 miles (16000 kilometers). When the oil change message appears in the information display, it is time for an oil change. Make sure you perform the oil change within two weeks or 500 miles (800 kilometers) of the message appearing.
Scheduled Maintenance It is critical that systems are flushed only with new fluid that is the same as that required to fill and operate the system or using a Ford-approved flushing chemical. Make sure to change your vehicle’s oils and fluids at the specified intervals or in conjunction with a repair. Flushing is a viable way to change fluid for many vehicle sub-systems during scheduled maintenance.
Scheduled Maintenance Check every six months Safety belts and seat latches for wear and function. Safety warning lamps (brake, ABS, airbag and safety belt) for operation. Washer spray and wiper operation. Clean or replace blades as necessary. Multi-Point Inspection In order to keep your vehicle running right, it is important to have the systems on your vehicle checked regularly. This can help identify potential issues and prevent major problems.
Scheduled Maintenance Multi-Point inspection Exterior lamps operation Steering and linkage * * ** Fluid levels ; fill if necessary Tires (including spare) for wear and proper pressure For oil and fluid leaks Windshield for cracks, chips or pits Half-shaft dust boots Washer spray and wiper operation Brake, coolant recovery reservoir, automatic transmission and window washer ** If your vehicle is equipped with a temporary mobility kit, check the tire sealant expiration Use By date on the caniste
Scheduled Maintenance When to expect the message prompting you to change your oil Interval Vehicle use and example Normal 7500-10000 miles (12000-16000 km) Normal commuting with highway driving No, or moderate, load or towing Flat to moderately hilly roads No extended idling Severe 5000-7499 miles (8000-11999 km) 3000-4999 miles (5000-7999 km) Moderate to heavy load or towing Mountainous or off-road conditions Extended idling Extended hot or cold operation Extreme Maximum load or towing Extreme hot o
Scheduled Maintenance Maintenance Intervals At every oil change interval as indicated by the information display * ** Change engine oil and filter. Rotate the tires. Perform a multi-point inspection (recommended). Inspect the automatic transmission fluid level. Consult your dealer for requirements. Inspect the brake pads, rotors, hoses and parking brake. Inspect the engine cooling system strength and hoses. Inspect the exhaust system and heat shields. Inspect the rear axle and U-joints (AWD).
Scheduled Maintenance Other maintenance items Every 20000 miles (32000 Replace cabin air filter. km) Every 30000 miles (48000 Replace engine air filter. km) At 100000 miles (160000 km) Every 100000 miles (160000 km) Every 150000 miles (240000 km) Change engine coolant. 2 Replace spark plugs. Inspect accessory drive belt(s). 3 Change automatic transmission fluid.
Scheduled Maintenance Other maintenance items Replace accessory drive belt(s). 1 4 Change the PTU and rear axle fluid (AWD). See Special Operating Conditions Scheduled Maintenance (page 484). 1 Perform these maintenance items within 3000 miles (4800 kilometers) of the last engine oil and filter change. Do not exceed the designated distance for the interval. 2 3 4 Initial replacement at six years or 100000 miles (160000 kilometers), then every three years or 50000 miles (80000 kilometers).
Scheduled Maintenance Perform the services shown in the following tables when specified or within 3000 miles (4800 kilometers) of the message appearing in the information display, prompting you to change your oil. • Example 1: The message comes on at 28751 miles (46270 kilometers). Perform the 30000-mile (48000-kilometer) automatic transmission fluid replacement.
Scheduled Maintenance Extensive idling or low-speed driving for long distances, as in heavy commercial use (such as delivery, taxi, patrol car or livery) As required Inspect frequently, service as required Change engine oil and filter as indicated by the information display and perform services listed in the Normal Scheduled Maintenance chart. * Replace cabin air filter. Replace engine air filter. Every 30000 miles (48000 Change automatic transmission fluid.
Scheduled Maintenance Operating in dusty or sandy conditions (such as unpaved or dusty roads) ** Every 5000 miles (8000 km) Change engine oil and filter. or six months Perform multi-point inspection. Every 30000 miles (48000 Change automatic transmission fluid. km) Change the PTU and rear axle fluid (AWD). See Axle and PTU Maintenance items under Exceptions later in this section. * This is an optional feature. ** Reset your Intelligent Oil-Life Monitor after engine oil and filter changes.
Scheduled Maintenance Hot Climate Oil Change Intervals Vehicles operating in the Middle East, North Africa, Sub-Saharan Africa or locations with similar climates using an American Petroleum Institute (API) Certified for Gasoline Engines (Certification mark) oil of SM or SN quality, the normal oil change interval is 3000 miles (5000 kilometers). If the available API SM or SN oils are not available, then the oil change interval is 1800 miles (3000 kilometers).
Scheduled Maintenance Repair Order #: Dealer stamp Distance: Engine hours (optional): Multi-point inspection (recommended): Signature: E146852 489 MKC (TME) Canada/United States of America, enUSA, Edition date: 201601, Second Printing
Scheduled Maintenance Repair Order #: Dealer stamp Distance: Engine hours (optional): Multi-point inspection (recommended): Signature: E146852 490 MKC (TME) Canada/United States of America, enUSA, Edition date: 201601, Second Printing
Scheduled Maintenance Repair Order #: Dealer stamp Distance: Engine hours (optional): Multi-point inspection (recommended): Signature: E146852 491 MKC (TME) Canada/United States of America, enUSA, Edition date: 201601, Second Printing
Scheduled Maintenance Repair Order #: Dealer stamp Distance: Engine hours (optional): Multi-point inspection (recommended): Signature: E146852 492 MKC (TME) Canada/United States of America, enUSA, Edition date: 201601, Second Printing
Scheduled Maintenance Repair Order #: Dealer stamp Distance: Engine hours (optional): Multi-point inspection (recommended): Signature: E146852 493 MKC (TME) Canada/United States of America, enUSA, Edition date: 201601, Second Printing
Scheduled Maintenance Repair Order #: Dealer stamp Distance: Engine hours (optional): Multi-point inspection (recommended): Signature: E146852 494 MKC (TME) Canada/United States of America, enUSA, Edition date: 201601, Second Printing
Scheduled Maintenance Repair Order #: Dealer stamp Distance: Engine hours (optional): Multi-point inspection (recommended): Signature: E146852 495 MKC (TME) Canada/United States of America, enUSA, Edition date: 201601, Second Printing
Scheduled Maintenance Repair Order #: Dealer stamp Distance: Engine hours (optional): Multi-point inspection (recommended): Signature: E146852 496 MKC (TME) Canada/United States of America, enUSA, Edition date: 201601, Second Printing
Scheduled Maintenance Repair Order #: Dealer stamp Distance: Engine hours (optional): Multi-point inspection (recommended): Signature: E146852 497 MKC (TME) Canada/United States of America, enUSA, Edition date: 201601, Second Printing
Scheduled Maintenance Repair Order #: Dealer stamp Distance: Engine hours (optional): Multi-point inspection (recommended): Signature: E146852 498 MKC (TME) Canada/United States of America, enUSA, Edition date: 201601, Second Printing
Scheduled Maintenance Repair Order #: Dealer stamp Distance: Engine hours (optional): Multi-point inspection (recommended): Signature: E146852 499 MKC (TME) Canada/United States of America, enUSA, Edition date: 201601, Second Printing
Scheduled Maintenance Repair Order #: Dealer stamp Distance: Engine hours (optional): Multi-point inspection (recommended): Signature: E146852 500 MKC (TME) Canada/United States of America, enUSA, Edition date: 201601, Second Printing
Scheduled Maintenance Repair Order #: Dealer stamp Distance: Engine hours (optional): Multi-point inspection (recommended): Signature: E146852 501 MKC (TME) Canada/United States of America, enUSA, Edition date: 201601, Second Printing
Scheduled Maintenance Repair Order #: Dealer stamp Distance: Engine hours (optional): Multi-point inspection (recommended): Signature: E146852 502 MKC (TME) Canada/United States of America, enUSA, Edition date: 201601, Second Printing
Scheduled Maintenance Repair Order #: Dealer stamp Distance: Engine hours (optional): Multi-point inspection (recommended): Signature: E146852 503 MKC (TME) Canada/United States of America, enUSA, Edition date: 201601, Second Printing
Scheduled Maintenance Repair Order #: Dealer stamp Distance: Engine hours (optional): Multi-point inspection (recommended): Signature: E146852 504 MKC (TME) Canada/United States of America, enUSA, Edition date: 201601, Second Printing
Scheduled Maintenance Repair Order #: Dealer stamp Distance: Engine hours (optional): Multi-point inspection (recommended): Signature: E146852 505 MKC (TME) Canada/United States of America, enUSA, Edition date: 201601, Second Printing
Scheduled Maintenance Repair Order #: Dealer stamp Distance: Engine hours (optional): Multi-point inspection (recommended): Signature: E146852 506 MKC (TME) Canada/United States of America, enUSA, Edition date: 201601, Second Printing
Scheduled Maintenance Repair Order #: Dealer stamp Distance: Engine hours (optional): Multi-point inspection (recommended): Signature: E146852 507 MKC (TME) Canada/United States of America, enUSA, Edition date: 201601, Second Printing
Appendices END USER LICENSE AGREEMENT VEHICLE SOFTWARE END USER LICENSE AGREEMENT (EULA) • • You (“You” or “Your” as applicable) have acquired a vehicle having several devices, including SYNC ® and various control modules, ("DEVICES") that include software licensed or owned by Ford Motor Company and its affiliates ("FORD MOTOR COMPANY").
Appendices • • Limitations on Distributing, Copying, Modifying and Creating Derivative Works: You may not distribute, copy, make modifications to or create derivative works based on the SOFTWARE, except and only to the extent that such activity is expressly permitted by applicable law notwithstanding this limitation or to the extent as may be permitted by the licensing terms governing use of any open source components included with the SOFTWARE.
Appendices MOTOR COMPANY, its affiliates and/or its designated agent reserve the right to discontinue without liability any Internet-based services provided to you or made available to you through the use of the SOFTWARE.
Appendices • • Links to Third Party Sites: The SOFTWARE may provide you with the ability to link to third party sites. The third party sites are not under the control of FORD MOTOR COMPANY, its affiliates and/or its designated agent.
Appendices EXPORT RESTRICTIONS: You acknowledge that the SOFTWARE is subject to U.S. and European Union export jurisdiction. You agree to comply with all applicable international and national laws that apply to the SOFTWARE, including the U.S. Export Administration Regulations, as well as end-user, end-use and destination restrictions issued by U.S. and other governments.
Appendices • • • Navigation Features: Any navigation features included in the system are intended to provide turn by turn instructions to get you to a desired destination. Please make certain all persons using this system carefully read and follow instructions and safety information fully. Distraction Hazard: Any navigation features may require manual (non-verbal) setup.
Appendices Your Responsibilities and Assumptions of Risk 514 MKC (TME) Canada/United States of America, enUSA, Edition date: 201601, Second Printing
Appendices • You agree to each of the following:(a) Any use of the SOFTWARE while driving an automobile or other vehicle in violation of applicable law or otherwise driving in an unsafe manner presents a significant risk of distracted driving and should not be attempted under any circumstances;(b) Use of the SOFTWARE at excessive volume poses a significant risk of hearing damage and should not be attempted under any circumstances;(c) The SOFTWARE may not be compatible with new or different versions of an o
Appendices OR WRITTEN INFORMATION OR ADVICE GIVEN BY FORD MOTOR COMPANY OR ITS AUTHORIZED REPRESENTATIVE SHALL CREATE A WARRANTY. SHOULD THE SOFTWARE, THIRD PARTY SOFTWARE, OR THIRD-PARTY SERVICES PROVE DEFECTIVE, YOU ASSUME THE ENTIRE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION. SOME JURISDICTIONS DO NOT ALLOW THE DISCLAIMER OF IMPLIED WARRANTIES OR LIMITATIONS ON APPLICABLE STATUTORY RIGHTS OF A CONSUMER, SO THE ABOVE DISCLAIMER MAY NOT FULLY APPLY TO YOU.
Appendices (c) Small claims court. You may also litigate any dispute in small claims court in your county of residence or FORD MOTOR COMPANY’S principal place of business, if the dispute meets all requirements to be heard in the small claims court. You may litigate in small claims court whether or not You negotiated informally first. (d) Binding arbitration.
Appendices • • you three incentives: (1) pay the greater of the award or $1,000; (2) pay twice your reasonable attorney’s fees, if any; and (3) reimburse any expenses (including expert witness fees and costs) that your attorney reasonably accrues for investigating, preparing, and pursuing your claim in arbitration. The arbitrator will determine the amounts. ii. Disputes involving more than $75,000. The AAA rules will govern payment of filing fees and the AAA’s and arbitrator’s fees and expenses. iii.
Appendices (b) use your own personal judgment while driving.
Appendices iii. is harmful, threatening, abusive, harassing, tortuous, defamatory, vulgar, obscene, libelous, or otherwise objectionable; and (f) lease, rent out, or otherwise permit unauthorized access by third parties to the TeleNav Software without advanced written permission of TeleNav. 4.
Appendices arbitration proceeding and the decision of the arbitrator shall be binding upon both parties. You expressly agree to waive your right to a jury trial. This Agreement and performance hereunder will be governed by and construed in accordance with the laws of the State of California, without giving effect to its conflict of law provisions.
Appendices not expressly granted in this Agreement are intended to, or shall be, granted or conferred by implication, statute, inducement, estoppel or otherwise, and TeleNav and its suppliers and licensors hereby reserve all of their respective rights other than the licenses explicitly granted in this Agreement. 8.
Appendices 9.1 End User Terms Required by HERE North America, LLC The data (“Data”) is provided for your personal, internal use only and not for resale. It is protected by copyright, and is subject to the following terms and conditions which are agreed to by you, on the one hand, and Telenav (“Telenav”) and its licensors (including their licensors and suppliers) on the other hand. © 2013 HERE. All rights reserved.
Appendices communication with any positioning devices or any mobile or wireless-connected electronic or computer devices, including without limitation cellular phones, palmtop and handheld computers, pagers, and personal digital assistants or PDAs. Warning. The Data may contain inaccurate or incomplete information due to the passage of time, changing circumstances, sources used and the nature of collecting comprehensive geographic data, any of which may lead to incorrect results. No Warranty.
Appendices Entire Agreement. These terms and conditions constitute the entire agreement between Telenav (and its licensors, including their licensors and suppliers) and you pertaining to the subject matter hereof, and supersedes in their entirety any and all written or oral agreements previously existing between us with respect to such subject matter. Governing Law.
Appendices B. Canada Data. The following provisions apply to the Data for Canada, which may include or reflect data from third party licensors (“Third Party Data”), including Her Majesty the Queen in Right of Canada (“Her Majesty”), Canada Post Corporation (“Canada Post”) and the Department of Natural Resources of Canada (“NRCan”): 1. Disclaimer and Limitation: Client agrees that its use of the Third Party Data is subject to the following provisions: a.
Appendices under the Agreement, or as otherwise may be provided, by Client) which shall include the following provisions on behalf of the Third Party Data licensors, including Her Majesty, Canada Post and NRCan: The Data may include or reflect data of licensors, including Her Majesty the Queen in the Right of Canada (“Her Majesty”), Canada Post Corporation (“Canada Post”) and the Department of Natural Resources Canada (“NRCan”). Such data is licensed on an “as is” basis.
Appendices Ecuador II. Mexico. The following provision applies to the Data for Mexico, which includes certain data from the Instituto Nacional de Estadística y Geografía (“INEGI”): A. Any and all copies of the Data and/or packaging containing Data for Mexico shall contain the following notice: “Fuente: INEGI (Instituto Nacional de Estadística y Geografía)” III. Latin America Territory A. Third Party Notices.
Appendices shall mean Geomarketing applications, GIS applications, mobile business asset management applications, call center applications, telematics applications, public organization Internet applications or for providing geocoding services. V. Europe Territory A. Use of Certain Traffic Codes in Europe 1. General Restrictions Applicable to Traffic Codes.
Appendices C. OS Enforcement. Without limiting Section IV(B) above, with respect to Data for the Territory of Great Britain, Client acknowledges and agrees that the Ordnance Survey (“OS”) may bring a direct action against Client to enforce compliance with the OS copyright notice (see Section IV(D) below) and paper map requirements (see Section IV(B) above) contained in this Agreement. D. Third Party Notices.
Appendices update such list from time to time. The license rights granted to Client under this TL with respect to the Data for such countries are contingent upon Client’s compliance with all applicable laws and regulations, including, without limitation, any required licenses or approvals to distribute the Application incorporating such Data in such respective countries. VI. Australia Territory A. Third Party Notices.
Appendices devices, including without limitation cellular phones, palmtop and handheld computers, pagers, and personal digital assistants or PDAs. You agree to cease using this Data if you fail to comply with these terms and conditions.
Appendices NO CIRCUMSTANCES SHALL NAV2’s OR ITS SUPPLIERS’ LIABILITY HEREUNDER EXCEED THE PRICE PAID. Certain liability exclusions may not be permitted under applicable law, so to that extent the above exclusion may not apply to you. Export Control You agree not to export to anywhere any part of the Data provided to you or any direct product thereof except in compliance with, and with all licenses and approvals required under, applicable export laws, rules and regulations.
Appendices functions. You may use Gracenote Data only by means of the intended End User functions of this device. This device may contain content belonging to Gracenote's providers. If so, all of the restrictions set forth herein with respect to Gracenote Data shall also apply to such content and such content providers shall be entitled to all of the benefits and protections set forth herein that are available to Gracenote.
Appendices ERROR-FREE OR THAT THE FUNCTIONING OF THE GRACENOTE SOFTWARE OR GRACENOTE SERVERS WILL BE UNINTERRUPTED. GRACENOTE IS NOT OBLIGATED TO PROVIDE YOU WITH ANY ENHANCED OR ADDITIONAL DATA TYPES THAT GRACENOTE MAY CHOOSE TO PROVIDE IN THE FUTURE AND IS FREE TO DISCONTINUE ITS ONLINE SERVICES AT ANY TIME. GRACENOTE DISCLAIM ALL WARRANTIES EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, TITLE, AND NON-INFRINGEMENT.
Appendices Website www.sunatraffic.com.au/termsandconditions/ 2. Intellectual Property SUNA Products and/or Services are for your personal use. You may not record, or retransmit the content, nor use the content in association with any other traffic information or route guidance service or device not approved by Intelematics. You obtain no right of ownership in any Intellectual Property Rights (including copyright) in the data that is used to provide SUNA Products and/or Services. 3.
Appendices and/or Services, and to the extent which it is lawful to do so, both Intelematics and each Supplier excludes any warranties which might otherwise be implied by any State or Federal legislation in relation to SUNA Products and/or Services. 7. Please Note Great care has been taken in preparing this manual. Constant product development may mean that some information is not entirely up-to-date. The information in this document is subject to change without notice.
538 MKC (TME) Canada/United States of America, enUSA, Edition date: 201601, Second Printing
Index A Adjusting the Steering Wheel......................78 Audio Unit......................................................365 Auto Hold........................................................189 See: Climate Control...........................................133 Power Tilt and Telescope Steering Column................................................................78 Autolamps.........................................................87 About This Manual............................................
Index AWD See: All-Wheel Drive............................................181 B Battery See: Changing the 12V Battery......................298 Blind Spot Information System.................225 Switching the System Off and On..................227 System Errors......................................................227 Using the System...............................................225 Bonnet Lock Capacities and Specifications - 2.3L EcoBoost™....................................................
Index D E Collision Warning System..........................232 Data Recording..................................................9 Principle Of Operation......................................232 Event Data Recording...........................................10 Service Data Recording.........................................9 Economical Driving.......................................251 Electric Parking Brake..................................187 Climate Controlled Seats............................
Index Engine Oil Check.........................................292 Adding Engine Oil..............................................292 Engine Oil Dipstick......................................292 Engine Specifications - 2.0L EcoBoost™....................................................346 Safety Chains.......................................................247 Trailer Brakes.......................................................247 Trailer Lamps........................................................
Index General Maintenance Information...........476 Multi-Point Inspection........................................479 Owner Checks and Services...........................478 Protecting Your Investment..............................476 Why Maintain Your Vehicle?.............................476 Why Maintain Your Vehicle at Your Dealership?......................................................476 Getting Assistance Outside the U.S. and Canada.........................................................
Index Traction Control...................................................129 Trailer......................................................................130 Transmission.........................................................130 Installing Child Restraints..............................19 Child Seats..............................................................19 Using Lap and Shoulder Belts............................19 Using Lower Anchors and Tethers for CHildren (LATCH).................................
Index Memory Function..........................................143 Easy Entry and Exit Feature..............................144 Linking a PreSet Position to your Remote Control or Intelligent Access Key...............144 Saving a PreSet Position...................................143 Message Center See: Information Displays.................................108 Mirrors See: Heated Windows and Mirrors.................136 See: Windows and Mirrors.................................
Index Roof Racks and Load Carriers...................237 Running-In One-Touch Up.......................................................93 Window Lock..........................................................94 Replacing the Battery..........................................53 Sounding the Panic Alarm..................................55 Protecting the Environment..........................16 Remote Start...................................................137 See: Breaking-In................................
Index Bluetooth..............................................................440 Clock......................................................................440 Display...................................................................453 General.................................................................450 Media Player........................................................439 Mobile Apps.........................................................448 Navigation............................................
Index Understanding Your Tire Pressure Monitoring System .............................................................335 Tires See: Wheels and Tires.......................................317 Towing a Trailer.............................................243 Load Placement..................................................243 Towing the Vehicle on Four Wheels.......249 Emergency Towing............................................249 Recreational Towing..........................................249 Towing....
Index Tires........................................................................316 Ventilation See: Climate Control...........................................133 VIN See: Vehicle Identification Number...............350 Voice Control...................................................80 W Warning Lamps and Indicators..................103 Adaptive Cruise Control....................................103 Anti-Lock Braking System.................................103 Auto Hold Active..........................
