Instruction Manual
$%')$#
(+#%'$*')$""$'.
!$)$#
Once the parameters have been set:
• Press and Hold the "4<>AH DCC>= of the
desired location for 2 seconds.
• The LED for that location will come ON.
• After 2 seconds the LED will go OFF
• The MSP display will show briefly that the informa-
tion is saved, then return to the Weld Mode.
#$) >;38=6C741DCC>=5>A;>=64AC70=B42
>=3BF8;;4=C4AC74!8<8CB">34
'!!#%'$*''$"
""$'.!$)$#
• Press and release the desired "4<>AHDCC>=.
• The LED for that location will come ON and the
stored procedure information will show in the dis-
plays.
• The LED will remain ON until another location is
selected
#$) >;38=6C741DCC>=5>A;>=64AC70=B42
>=3F8;;A44=C4AC74L(0E4M">34
"-B0K$#)'$!!'
*'""$'.
200
Steel 1/8”
CC DC
30.5
58
+
MEMORY
BUTTON
LED
INDICATOR
MSP
DISPLAY
Hold for 2 Seconds
to Save
Press and Release
to Recall
Memory 1
Saved