User Manual

9
www.linarie.com.au
cont. operation
5.3.5 Timer control
With the desired heating zone Powered ON and flashing, press the “Time” key.
The timer display will flash and show a ”00” or “30”, Press the “+” or “-” to
increase or decrease to the desired time. Choose up to 99 minutes.
Once the timer is set, timer starts if no other key is touch after 3 to 5 seconds,
the timer display will flash and remain active for that particular cooking zone.
When the time reaches “-” a “beeping” sound will go off indicating that the
time is up, and selected heating zone shut off automatically.
If you want to set another zone to switch-off automatically, choose the cooking
zone and press “Time” key. Repeat the same steps above.
If you want to check the remaining time for another cooking zone, press the
cooking zone selector key, until the indicator for the desired burner flashes.
If more than one switch - off time is programmed, the one with shortest remaining
time will show on the display, the indicator for that particular zone will flash.
This area can be used as a single zone or as two different
zones, accordingly to the cooking needs anytime.
We don’t recommend other except for above mentioned three operations because it might effect the heating off appliance
Press the ‘’P’’, ‘’B’’, ‘’-‘’”” key to increase or decrease the heating power.
Free area is made of two independent inductors
that can be controlled separately.
Cancelling the timer:
Choose the cooking zone key for the desired burners, then touch the ”timer’’, then
the timer of the selected cooking zone has been cancelled.
You can use the timer in two different ways:
As two independent zones
Notice: Make sure the pan is bigger than 12cm.
a. Put a pan on the right up side or the right down
side of the large flexible zone.
b. Put two pans on both sides of the large flexible
zone.
As a large flex zone
Cookware: 250mm or 280 mm diameter cookware (Square or oval cookware are acceptable)
To activate the free area as a large flex zone, simply touch the dedicated key. When the flex zone of
the cooktop is flashing, press the key, the indicator display read ‘’5’’ flashes.
As a large flex zone, we suggest the used as the follow:
5.3.6 Flex zone (applicable on selected Models only/ Cannes, Dijon, Grenoble and Toulouse)