User's Manual

ManualsBrandsLINAK ManualsElectronicsBLE FS3

CHAPTER 9.27 FS3 Page 1 of 14

Speciﬁcations are subject to change without prior notice.

LINAK SALES BACK-UP

14th edition 2020-05-26

Foot Switch FS3

The Foot Switch FS3 is an ergonomically designed modular system, developed for

use together with LINAK control boxes and IC actuators with Intelligent Control. The

LINAK® Foot Switch is designed for easy and improved control of e.g. hospital beds

and couches and has been developed in cooperation with end users. The Foot Switch is

therefore very user- and cleaning-friendly and has an aesthetic design.

The FS3 is a robust foot control which is available both as a single and double version

as well as a ﬂoor and bed model. When mounting the double version on a bed, the

Foot Switch will be placed on each side of the bed frame to enable easy operation from

both sides. It is also possible to have the double ﬂoor version for medical applications,

e.g. couches, in order to achieve the opportunity to control different motions of the

application. The FS3 is furthermore available in an analogue version, an OpenBus™

and a wireless version (ﬂoor only).

Information also in data sheet

Information also in user manual

List of contents Page no.

Features / Options / Usage 2

Technical Speciﬁcation 2

Dimension drawings / Dimension for ﬂoor model 3-4

Dimension for bed model 3

Dimension for 2 function Foot Switch 4

Ordering example 5

Functionality overview analogue 6

Functionality overview OpenBus™ and wireless 7

Combination possibilities 8

Mounting 10

Product Name:FS3

Model Name:FS3

Summary of content (15 pages)

PAGE 1
CHAPTER 9.27 FS3 Page 1 of 14 Foot Switch FS3 Product Name:FS3 Model Name:FS3 The Foot Switch FS3 is an ergonomically designed modular system, developed for use together with LINAK control boxes and IC actuators with Intelligent Control. The LINAK® Foot Switch is designed for easy and improved control of e.g. hospital beds and couches and has been developed in cooperation with end users. The Foot Switch is therefore very user- and cleaning-friendly and has an aesthetic design.
PAGE 2
CHAPTER 9.
PAGE 3
PAGE 4
CHAPTER 9.27 FS3 Dimensions drawings Dimension for 1 channel floor model Possible cable dimension and plug type see page 8. Dimension for 1 channel bed model Possible cable dimension and plug type see page 8. Specifications are subject to change without prior notice.
PAGE 5
CHAPTER 9.27 FS3 Page 4 of 14 Dimension for 2 channel floor model Possible cable dimension and plug type see page 8. Dimension for 2 channel bed model with cable (analogue and OpenBus versions) Possible cable dimension and plug type see page 8. Specifications are subject to change without prior notice.
PAGE 6
CHAPTER 9.27 FS3 Page 5 of 14 Foot Switch FS3 E-con ordering example: F S 3 2 0 1 2 000 0 0 0 6 - G 0 0 0 0 0 0 0 0 D 0 1 0 0 0 Not used 0 = None Not used 0 = None Not used 0 = None FS3 Cable length: 0 1 2 3 X = = = = = FS3 Cable Matr.
PAGE 7
CHAPTER 9.27 FS3 Page 6 of 14 Functionality Functionality overview analogue: Left pedal Code nos.
PAGE 8
CHAPTER 9.27 FS3 Page 7 of 14 Functionality overview OpenBusTM Left pedal Code nos. FS3XVS0 FS3XVS1 FS3XVS2 FS3XV00 FS3XV11 FS3XV22 FS3XV01 FS3XV10 FS3XV20 + N/A N/A N/A H0 H10 H20 H0 H10 H20 N/A N/A N/A H1 H11 H21 H1 H11 H21 Functionality overview Wireless 2nd pedal Code nos.
PAGE 9
CHAPTER 9.
PAGE 10
CHAPTER 9.27 FS3 Page 9 of 14 USPs and KSFs: Specification USPs (towards OEM): KSFs (towards end users): User-friendly interface design Aesthetic design that improves user experience Simple to use, not confusing.
PAGE 11
CHAPTER 9.27 FS3 Page 10 of 14 Mounting of the FS3 bed model: To mount the FS3 bed model, you have to use the bolt and the nut which have already been fitted to the FS3 bed model (see picture below). Bolt and nut for mounting 7 mm BOLT M5X25 NUT M5 You have to remove the nut before mounting the FS3 on the bed and after mounting the FS3to the bed, the nut is fastened to secure that the FS3 is fixed to the bed frame. Please note that the max. torque on the nut should be 2.0 Nm (20kgf.
PAGE 12
CHAPTER 9.27 FS3 Page 11 of 14 LED functionality: Function LED behaviour (FS3) LED behaviour (CB) Enter pairing mode LED flashes green LED solid green Locating control box LED flashes green Closer = faster flashing LED flashes green and yellow and buzzer is ON, same speed as FS3. The closer to the control box, the faster the flash. When the buzzer and the LEDs have the same sound and visual frequency, FS3 and CB are ready for pairing.
PAGE 13
CHAPTER 9.27 FS3 Page 12 of 14 Recommendations: • Do not pull the cable or drop the FS3 on the floor. • Do not play with the FS3. • Do not submerge the foot switch into water. • Unless otherwise specified or agreed with LINAK, the foot switch is only intended to be used for LINAK systems. • It is recommended to check the foot control for damage and holes caused by violent handling before washing the application or at least once a year.
PAGE 14
CHAPTER 9.27 FS3 Page 13 of 14 Batteries What batteries to use The FS3 Wireless must be equipped with two pieces AAA batteries. Due to the availability of AAA batteries, we recommend that you buy the batteries locally. If you prefer to buy from LINAK A/S, the LINAK part number is: 0063010. How to mount batteries correctly 1. Underneath the FS3 Wireless. Remove Phillips screws and remove battery cover. 2. Place batteries correctly to ensure the electrical polarity and place battery cover again.
PAGE 15
CHAPTER 9.27 FS3 FS3 Wireless pairing: 1 2 3 4 Open the battery cover on the back of FS3. Place batteries and move within 2 meters of the control box. Activate Direct Pairing by pressing the button under the battery cover for 3 seconds. Buzzer and LED are now activated. Move the foot switch within 10 cm of the control box until the buzzer frequency changes from slow to fast. Confirm pairing by pressing the button under the battery cover. A double confirmation beep means that pairing is OK.