Datasheet

New Type Old
Type
Spindle
Pitch
(mm)
Thrust max.
Push/Pull
(N)
Self-lock
max. (Push)
(N)
Self-lock
max. (Pull)
(N)
Typical speed
0/full load
(mm/s)
Stroke length
(in steps of 30 mm)
Typical Amp. at
full load (A)
24V - 12V
12XX00-1XXX12XX 12.1 2 750 750 375 14 5 40 - 130 - 4.6
12XX00-1XXX24XX 12.1 2 750 750 375 14 6 40 - 130 2.2 -
12XX00-2XXX12XX 12.2 4 300 300 150 27 16 40 - 130 - 2.5
12XX00-2XXX24XX 12.2 4 300 300 150 27 16 40 - 130 1.5 -
12XX00-3XXX12XX 12.3 6 200 200 100 40 28 40 - 130 - 2.2
12XX00-3XXX24XX 12.3 6 200 200 100 40 28 40 - 130 1.0 -
Technical specifications:
LA12
Ordering example:
12 x x xx -xxxx xx x x
No positioning
Cable
0 = 2 core straight 0.75m
1 = 2 core mono Jack straight 2.3m
With reed
2 = 3 core stereo Jack straight 2.3m
3 = 3 core straight 0.75m
4 = 4 core straight 0.75m
With analogue feedback (Potentiometer)
0 = 5 core straight 0.93m
With IC
X = Special cable
IP version: 0 = IP51
2 = IP66
Motor: 12 = 12VDC Motor
24 = 24VDC Motor
Stroke
040 Standard length
070 Standard length
100 Standard length
130 Max. standard length
Spindle type 1 = 2 mm
2 = 4 mm
3 = 6 mm
Material
00 = Plastic inner tube
02 = Stainless steel inner tube and stainless steel eye (AISI 303) w. bushes
03 = Stainless steel inner tube and stainless steel eye (AISI 304) w. bushes
0X = Special
Memory positioning: Necessary cable type
0 = None 0 or 1
A = Potentiometer 0-10 V/max. 100 stroke -Phased out 8 for IC
(8 core)
B = Analogue feedback 0 - 10V 0 (5 Core)
C = Analogue feedback 0.5 - 4.5V 0 (5 Core)
E = Reed switch 10 pulses/spindle revolution 4 (4 Core)
G = Hall sensor 2 pulses/spindle revolution 4 pulses -Phased out 8 for IC
(8 core)
H = Hall sensor 4 pulses/spindle revolution 8 pulses -Phased out 8 for IC (8 core)
M = Reed switch 4 pulses/spindle revolution 4 (4 Core)
P = Potentiometer max. 100 mm stroke 0 (5 Core)
R = Reed switch 4 pulses/spindle revolution 2 or 3 (3 Core)
iFLEX options for LA12:
T = Potentiometer 0-10 volt / max. 100mm stroke 8 for IC (8 Core)
D = None 8 for IC (8 Core)
F = Analogue feedback 0 - 10V 8 for IC (8 Core)
S = Single hall feedback (with 10 pole magnet) 8 for IC (8 Core)
K = Analogue feedback 0.5 - 4.5V
8 for IC (8 Core)
Back fixture type and position:
1
=
01
2
=
02
3
=
Like 01, but in aluminium
4
=
Like 02, but in aluminium
5
=
Like 01, but in stainless steel (AISI 304)
6
=
Like 02, but in stainless steel (AISI 304)
X = Special
Actuator type LA12
=
=
=
=
8 = 8 core straight 2300mm