User's Manual

Mass Open/Close system
Receiver
2017/02/2
5
4
GL-TE-017(01)
Label:
Operation Instruction:
Before all operation, please connect transmitter box to DC power, plug the receiver box MC250 to
L1 actuator , and turn the key lock to position “On”.
The display will show information if power on and initialization correct.
Pairing
1. Transmitter box:
 Presse Open/Close/Enable at the same time, the display will show: “Enter the paring mode”, and
counter for 3 s to enter.
 Press any key will exit paring mode
2. Receiver box
There are two method to make the pairing
 When power on, there is 5 seconds in pairing model, once received pairing signal from transmitter,
the pairing will execute automatically, the motor will drive out and in for twice in 4 seconds, then the
paring is finished.
 press both buttons of handset for 5 seconds, if transmitter box is in paring mode, the motor will
drive out and in for twice in 4 seconds, then the paring is finished.