User's Manual

Mass Open/Close system
Wall Unit
Specification
8
GL-TE-017(V08)
Label
Operation Instruction:
Before all operation, please connect transmitter box to DC power, plug the receiver box MC250 to
L1 actuator , and turn the key lock to position “On”.
The display will show information if power on and initialization correct.
Pairing
1. Transmitter box:
 Presse Open/Close/Enable at the same time, the display will show : “Enter the paring mode”, and
counter for 3 s to enter.
 Press any key will exit paring mode
2. Receiver box
There are two method to make the pairing
 When power on, there is 5 seconds in pairing model, once received pairing signal from transmitter ,
the pairing will execute automatically , he motor will drive out and in for twice in 4 seconds, then the
paring is finished.
 press both buttons of handset for 5 seconds, if transmitter box is in paring mode, the motor will
drive out and in for twice in 4 seconds, then the paring is finished.
Operation:
 Press Open + Enable to let all seats open
 Press Close n + Enable to let all seats Close
Remark:
If turning the key switch 2.5 times within 1 seconds, the operation will be disabled for 5 s, and the working
LED indicator will be flashing to prevent user playing with the system.