linear motion systems Cinema Seat Mass Open/Close Wall Box Transmitter Product Specification
Mass Open/Close system Wall Unit Specification Warning The socket-outlet shall be installed near the equipment and shall be easily accessible! FCC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
Mass Open/Close system Wall Unit Specification Description This system is designed for cinema seats mass open and close. With one wall unit box could control up 100 sets seats open and close at one time. Technical Parameter Mass Open and Close Wall Box Model: HC371 Article No.: 501958 Dimension:250x200x100mm Input: 29Vdc, Max. 0.1A Backup Battery: 18V (2x 6LR61) Wireless Parameters RF Frequency: 2.
Mass Open/Close system Wall Unit Specification Description for system 1. Front panel LCD Display Power Key lock switch 2.
Mass Open/Close system Wall Unit Specification 3. DC Input with PG7 Connector The DC Power Input (Cable gland optional) 4.
Mass Open/Close system Wall Unit 6. Accessary 2.4GHz 5dBi antenna x1 Antenna Extension Cable 2m x1 Antenna Front Panel The way to assemble the face plate with antenna and extension cable.
Mass Open/Close system GL-TE-017(V08) Wall Unit 7 Specification
Mass Open/Close system Wall Unit Specification Label Operation Instruction: Before all operation, please connect transmitter box to DC power, plug the receiver box MC250 to L1 actuator , and turn the key lock to position “On”. The display will show information if power on and initialization correct. Pairing 1. Transmitter box: Presse Open/Close/Enable at the same time, the display will show : “Enter the paring mode”, and counter for 3 s to enter. Press any key will exit paring mode 2.
Mass Open/Close system Wall Unit Specification Revised history Item 1 2.