User's Guide

Mass Open/Close system
Wall Unit
2016.09.22
8
GL-TE-017(V06)
Label
Operation Instruction:
Before all operation, please connect transmitter box to AC power, plug the receiver box MC250 to
L1 actuator.
Pairing
1. Transmitter box:
 Turn the key left to position Open, turn right to position Close, and turn left to position Open again
in 3 seconds, the pairing LED will light on, the transmitter is pairing mode.
 Turn the key any direction will exit paring mode
2. Receiver box
press both buttons of handset for 5 seconds, if transmitter box is in paring mode, the motor will drive
out and in for twice in 4 seconds, then the paring is finished.
Operation:
 Turn key to position Open to let all seats open
 Turn key to position Close to let all seats close
 Release the key to position I to standby.
Remark:
If turning the key switch 2.5 times within 1 seconds, the operation will be disabled for 5 s, and the working
LED indicator will be flashing to prevent user playing with the system.