linear motion systems Cinema Seat Mass Open/Close Wall Box Transmitter Product Specification
Mass Open/Close system Wall Unit 2016.09.22 FCC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Any changes or medications not expressly approved by party responsible for compliance could void the user’s authority to operate the equipment.
Mass Open/Close system Wall Unit 2016.09.22 Description This system is designed for cinema seats mass open and close. With one wall unit box could control up 100 sets seats open and close at one time. Technical Parameter Mass Open and Close Wall Box Model: HC370 602087 Dimension:250x200x100mm AC Input: 100~240VAC,50/60Hz,1.6A ~0.7A Akku Pack Cell:18650x3 Rated Capacity: 16.2Wh Wireless Parameters RF Frequency: 2.
Mass Open/Close system 2016.09.22 Wall Unit Description for system 1． Front panel Working Mode Indicator Standby Position Reset Button Pairing Mode Indicator Mass Open Position Mass Close Position Key selector switch 2.
Mass Open/Close system Wall Unit 2016.09.22 3. AC input with PG7 Connector The AC Power Input (Cable gland optional) 4.
Mass Open/Close system 2016.09.22 Wall Unit 5. Front Panel LED Indicator Key selector switch Terminal Face plate connector T-Plug for Reset 6. Accessary 2.
Mass Open/Close system Wall Unit Antenna Front Panel The way to assemble the face plate with antenna and extension cable. GL-TE-017(V06) 7 2016.09.
Mass Open/Close system Wall Unit 2016.09.22 Label Operation Instruction: Before all operation, please connect transmitter box to AC power, plug the receiver box MC250 to L1 actuator. Pairing 1. Transmitter box: Turn the key left to position Open, turn right to position Close, and turn left to position Open again in 3 seconds, the pairing LED will light on, the transmitter is pairing mode. Turn the key any direction will exit paring mode 2.
Mass Open/Close system 2016.09.22 Wall Unit Revised history Item 1 2 3 4 5 6 7. Change content First issue Add the picture and description Add drawing and detail description Add the Reset button, change 1& 2 to open and close Add the Reset text on the face plate, update with new lock, add the AC cable Correct the label art. No. Add FCC statement and IC caution , add certification list Index 00 01 02 03 04 Revised date 2015.12.31 2016.02.02 2016.05.30 2016.08.23 2016.09.06 05 06 2016.09.06 2016.09.
