Product Manual

CUSTOMER PREPARATION CHECKLIST
□ Verify packaging for all contents.
□ Follow assembly and installation carefully, do not proceed if you have any questions.
□ Contact The LIMBSAW Company with any questions you have regarding assembly or installation.
□ Ensure that any and all fasteners are secured.
□ Operators have read all Safety & Operation sections of this manual and understand the safe and proper
use of the equipment.
□ I understand that unauthorized alteration voids the warranty.
WARNING
OSHA, ASABE, SAE and ANSI standards require the use of protective guards at all times for non-agricultural use. The LIMBSAW
Company strongly recommends that such guards should be used to minimize risk of property damage, serious bodily injury or
even death from object hazards or by contacting rotating parts, i.e. driveline, tires, etc.
OSHA STD 1928.57: GUARDING OF FARM FIELD EQUIPMENT. CSA Z432-04 (R2009): SAFEGUARDING OF MACHINERY.
BS EN 953:1997+A1:2009: SAFETY OF MACHINERY; GUARDS. General requirements for the design and construction of fixed and
movable guards
Model Number: ______________________________________________
Serial Number: ______________________________________________
Do not remove this checklist from the Operator’s Manual.
It is the responsibility of the owner to complete the procedures listed above.
2
European Union Statement of Compliance
The CE mark is affixed to the Limb Saw product to confirm compliance with the following European Community Standards
and Directives:
BS EN ISO 12100: SAFETY OF MACHINERY - GENERAL PRINCIPLES FOR DESIGN – 2010 ; RISK ASSESSMENT AND RISK REDUCTION.
This equipment conforms with the protection requirements of Council Directives 2006/42/EC on the approximation of the
laws of the Member States relating to Safety of machinery.