User's Guide

!
6. SSC Command Reference
7.3. ap
Description
ap commands are used to set the parameter of AP network interface.
Example
ap󰲧-S󰲧[-s󰲧ssid]󰲧[-p󰲧password]󰲧[-t󰲧encrypt]󰲧[-n󰲧channel]󰲧[-h]󰲧[-m󰲧max_sta]
ap󰲧–Q
ap󰲧–L
Parameter
7.4. mac
Description
mac commands are used to query the MAC address of the network interface.
Example
mac󰲧-Q󰲧[-o󰲧mode]
-s ssid Scan or connect Access Points with the ssid.
-b bssid Scan the Access Points with the bssid.
-n channel Scan the channel.
-h Show scan results with hidden ssid Access Points.
-Q Show STA connect stutus.
-D Disconnected with current Access Points.
Parameter Description
Table 6-3. ap Command Parameter
Parameter Description
-S Set AP mode.
-s ssid Set AP ssid.
-p password Set AP password.
-t encrypt Set AP encrypt mode.
-h Hide ssid.
-m max_sta Set AP max connections.
-Q Show AP parameters.
-L Show MAC Address and IP Address of the connected station.
Xinyuan
! /1210
2021.12