User Guide 0
IMPORTANT SAFETY INSTRUCTIONS: Please read User Guide before using this product. Please keep User Guide for future reference. Please read the cautions to prevent possible danger and loss of property. FEATURES: Capacitive touch screen 170°Wide viewing angles; High resolution: 1280×800; Wide voltage: DC 7-24V; High contrast: 800:1; POP-UP shortcut menu. CAUTIONS: 1. Please do not place the display screen towards the ground. 2. Please avoid heavy impact or drop onto the ground. 3.
1. PRODUCT DESCRIPTION 1．Dial: turn up and down to adjust the value of menu option; press to confirm. 2．INPUT: circularly switch among of VIDEO, HDMI, VGA and SDI. 3．F1-F3: User-definable buttons.
1. VGA interface. 2. Battery power on/off switch: “O” is power off; “|” is power on. 3. DC 12V power input. 4. DC/TALLY connector. 5. HDMI input interface. 6. HDMI output interface (Optional). 7. Video output interface. 8. A / V input interface. 9. Earphone jack. 10. SDI output interface (Optional). 11. SDI input interface (Optional). 12. Speaker 13. Slide to left to connect power cable (connecting with the battery plate). 14.
3. INSTALLATION OF SUNSHADE AND BATTERY PLATE Installation of sunshade: ① As shown, buckle the upward side of sunshade cover on the device. ② As shown, press the under buckles of sunshade cover at the same time. ③ As shown, bend sunshade panel to meet and paste with sunshade interlocking. ④ Installation completed.
4. DV BATTERY MOUNT PLATE Standard mounts process Following three types of battery plates are suitable for this device, model F970, QM91D, DU21 & LP-E6 (choose 2 out of 4). MODEL: F-970 MODEL: QM91D MODEL: DU21 MODEL: LP-E6 DV Battery Mount Plate: DV Battery Mount Plate Specification: Model DU21 for battery of Panasonic DV: NV-GS/PV-GS/DZ-MV/GS/H28/H258/H288GK series, comply with Panasonic battery DU06/VBD140/SANYO DZhs301sw/Hitachi DZ-HS303SW/BZ-BP14S/DZ3200/BP07W.
V-mount battery plate (optional): Please refer to GP-L130AB type battery specifications. V-mount Battery Plate Plate Bracket Anton Bauer mount battery plate (optional): Please refer to GP-L130B type battery specifications. Anton Bauer Mount Battery Plate Plate Bracket 5.
6. MENU SETTING Before setting the functions, please make sure the device is connected correctly. 6-1. Touch Control Gesture Swipe up to activate the shortcut menu. Swipe down to hide the shortcut menu. (Unable to hide the shortcut menu without signal input.) 6-2. F1-F3 3 user-definable function buttons: Long press any F1-F3 key for 3-5 seconds to pop-up shortcut menu directly. As shown in Figure (default menu button in blue font). Slide up and down to select the desired option.
6-3. Dial Operation Turn down the dial to activate Brightness adjustment. Turn up and down to adjust the value directly. Press the dial to activate options switch among of “Brightness, Contrast, Saturation, Sharpness, Hue, Volume and Exit”. (Option adjusted currently will be default option when user press the dial next time.) 6-4. MENU Operation 6-4-1、Shortcut Menu Bar Swipe up on the display screen to activate shortcut menu, select the option needs to adjust on the menu bar.
6-4-2. Clock” ”, enter the menu options “ ” is return,” ” is exit.
③ Display ITEMS Auto Phase Clock H-Position V-Position Image Flip Color Bar OPTIONS OFF, ON 0 – 63 0 – 100 0 – 100 0 – 100 OFF, ON OFF, ON Options under VGA mode. ④ Color Temp ITEMS Color Temp R Gain 0 ~ 255 G Gain 0 ~ 255 B Gain 0 ~ 255 R Offset 0 ~ 511 G Offset 0 ~ 511 B Offset 0 ~ 511 OPTIONS 6500K/ 7300K/ 9300K/ User Note: Only available under “User” mode to meet the color value you need.
⑤、Marker ITEMS Center Marker Marker Color Marker Mat Thickness OPTIONS OFF, ON Red, Green, Blue, White, Black 0–7 1–8 ⑥ PIP ITEMS PIP Mode PIP Source PIP position PIP Swap OPTIONS Small, Medium, Large, PBP, POP Video, VGA , HDMI and SDI (SDI is optional) Upper Left, Upper Right, Lower Left, Lower Right Signal adjust & switch under PBP and POP modes.
⑦ Setting ITEMS Language LOGO Camera Peaking Color Peaking Lever Exposure Lever Reset Upgrade OPTIONS English, Chinese ON, OFF 480P (5DII Mode) / 1080I (5DIII Mode) Red, Green, Blue, White, Black 0 – 100 0 – 100 12
7. ACCESSORIES Standard Accessories: 1. Sun Shade Cover 2. Gimbal bracket 3. HDMI A/C cable 4. Mini XLR & TALLY cable 5. 12V DC adapter 6. Shoe Mount (for camera only) 7. Audio output cable 8. Composite cable 9. VESA Adaptor Panel 10. Battery Plate (F-970/QM91D/DU21/LP-E6) 11. Adaptor Panel 12. Suitcase 13. Manual 1 Piece 1 Piece 1 Piece 1 Piece 1 Piece 1 Piece 1 Piece 1 Piece 1 Piece 2 Pieces (Choose 2 out of 4) 1 Piece 1 piece 1 Copy Optional Accessories 1. VESA folding bracket 2. VGA cable 3.
8. PARAMETERS Panel Physical Resolution Brightness Contrast Viewing Angle Input Voltage Input Signal Power Consumption Operating Temperature Storage Temperature Dimension (LWD) Weight 10.1” LED Back light 1280×800 350cd/㎡ 800: 1 170°/ 170°(H/V) DC 7-24V AV, HDMI, VGA and SDI ≤ 10W -0℃~50℃ -20℃~60℃ 250×170×29.6mm 735g (SDI is optional) 9. TROUBLE SHOOTING 1. Only black-and-white display: Check whether the color saturation is properly setup or not. 2.
15
