User Manual

3. Software application

1. Cross-connection network cable

Note：W: white, G: green, O: orange, Bl: blue, Br: brown

2. Software settings

①. Compress the software in CD to computer.

②. Connect the LAN port with PC.

③. Set the PC IP to 192.168.1.XXX network segment (XXX is a

user-definable parameter).

④. Open the application program,

then select the monitor which is

needed to be adjusted (Monitor1

or Monitor2).

⑤. Set the parameter values

according to user's individual

requirements.

First, click the "read" button to

read the corresponding parameter

value of the device to the software,

secondly, modify the parameter

value on the software, then, the

instruction can be realized on the

device.