User Guide
IMPORTANT SAFETY INSTRUCTIONS: Please read User Guide before using this product. Please keep User Guide for future reference. Please read the cautions to prevent possible danger and loss of property. FEATURES: 178° Wide viewing angles. High resolution: 1280×800. High brightness: 400cd/㎡. High contrast: 800:1. Faster response time. TALLY interface with indicating light. Firm & thin design. CAUTIONS: 1. Please do not place the display screen towards the ground. 2.
1. PRODUCT DESCRIPTION 1． INPUT: circularly switch among of HDMI, YPbPr, Video and SDI. 2． MENU: To activate OSD (on-screen display) menu. Press to switch among the brightness, sharpness, contrast, saturation, Tint, MENU and Exit. 3． ◄ Left selection button: to select item on OSD menu and adjust its value; Press to decrease the value of brightness, sharpness, contrast, saturation and Tint. 4.
3. 4. 12V DC power input. Line slot. 4. YPbPr input. 5. YPbPr output. 6. Video input. 7. 8. HDMI input. 9. HDMI output. 10. SDI input. 11. SDI output. Video output. 12. The LAN port. (Connected to PC network interface for function adjustment.) 2. MENU SETTING Before setting the functions, please make sure the device is connected correctly. 2-1. Shortcut buttons: 2-1-1.
►”buttons to meet their needs. 2-1-2. FN user-definable function button Press FN button to pop up the default options, Use “◄ / ►” buttons to adjust the value of selected item. Long press FN button for 3-5 seconds to pop up shortcut menu directly. As shown in right Figure (default menu is displayed in white font). Use “◄ / ►” buttons to select the desired item. Finally, use the “ENTER” button to confirm the selected item as default.
ITEMS Brightness Contrast Saturation Tint Sharpness Color Temp OPTIONS 0 - 100 0 - 100 0 – 100 0 – 100 0 – 100 6500ºK, 7500 ºK, 9300 ºK, User Red Note: Available only in “User” mode to choose Green the color value you need. Blue 2-2-2. Marker ITEMS Center Marker Safety Marker OPTIONS ON, OFF OFF, 95%, 93%, 90%, 88%, 85%, 80% 2-2-3. Display ITEMS Aspect Ratio H / V delay Check Field Pixel-to-Pixel OPTIONS Full Screen, 16:9, 4:3, 1.85:1, 2.
Underscan Color Bar Zoom Image Flip Freeze Input PIP OFF, ON OFF, ON OFF, ×2, ×4, ×6, ×8 OFF, ON OFF, Freeze Small, Medium, Large, PBP, POP 2-2-4. DSLR Aux& Audio ITEMS Camera OPTIONS 480P (5D-II Mode), 1080I (5D-Ⅲ Mode) 2-2-5.
3. Software application 1. Cross-connection network cable Note：W: white, G: green, O: orange, Bl: blue, Br: brown 2. Software settings ①. Compress the software in CD to computer. ②. Connect the LAN port with PC. ③. Set the PC IP to 192.168.1.XXX network segment (XXX is a user-definable parameter). ④. Open the application program, then select the monitor which is needed to be adjusted (Monitor1 or Monitor2). ⑤. Set the parameter values according to user's individual requirements.
4. ACCESSORIES 1. 2. 3. 4. 5. DC 12V Power adapter TALLY connector Software disk line slot Manual 1 piece 1 piece 1 piece 1 piece 1 piece 5. PARAMETERS Panel Physical Resolution Brightness Contrast Viewing Angle Input Voltage Input Signal Power Consumption Operating Temperature Storage Temperature Dimension (LWD) Weight 7” LED IPS 1280×800 400 cd/㎡ 800: 1 178°/ 178°(H/V) DC 7-24V HDMI, YPbPr, SDI, Video ≤18W -20℃~60℃ -30℃~70℃ 482.5×133.5×25.3mm 2885g 6. TROUBLE SHOOTING 1.
5. Other problems: Please press “MENU” button and choose “SYSTEM→ Manufacturer Default →ON”, then press "ENTER" button to confirm it. 6. According to the ISP, the machine can not function properly: ISP is used for program upgrades, non-professionals do not use. The device will reboot if selected accidentally! Note: due to constant effort to improve products and product features, specifications may change without prior notice.
10
