COLOR TFT LCD MONITOR User Manual
IMPORTANT SAFETY INSTRUCTIONS: Please read manual before using this product. Please keep manual for future reference. Please read the cautions to prevent possible danger and loss of property Please enjoy the benefits of convenience, safety, and space-saving from this TFT LCD monitor in different ways. FEATURES: This product employs integrate circuits, lower power consumption, and lower radiation emission. It has fashion designed appearance and good portability.
Contents 1. PRODUCT DESCRIPTION ................................................................................ 3 2. WIRELESS HD TRANSMITTER ....................................................................... 5 3. WHDI REMOTE CONTROL ............................................................................... 5 4. WHDI FUNCTION ................................................................................................ 6 5. INSTALLATION OF SUNSHADE COVER AND BATTERY PLATE ........... 8 6.
1. PRODUCT DESCRIPTION 1．Speaker. 2．POWER：ON/OFF (Light turns to red when power on). 3．VIDEO: Indicator lights up when signal switch to video state. 4．YPbPr: Indicator lights up when signal switch to YPbPr state. 5．HDMI: Indicator lights up when signal switch to HDMI state. 6．WHDI: Indicator lights up when signal switch to WHDI state. 7．F1、F2、F3、F4：User-definable buttons.
1. Video signal output / input. 2. Audio signal input. 3. HDMI signal output (Optional) / input. 4. YPbPr signal input 5 Mini USB input. (Only for program upgrades, do NOT use if non-professionals) 6. Power cable interface (connecting to the battery plate). 7. DC power input. 8. Battery power on/off switch. 9. 4-pin XLR DC power input. Pin number Signal ① GND ②③ ④ ……... +12V 10. WHDI Infrared receiving window. * Option for product model with"/P" only.
2. WIRELESS HD TRANSMITTER 1. 2. 3. 4. 5. Code key. Network indicating light. Video indicator. HDMI interface (connect with HDMI device). Mini USB port (connect with power). 3. WHDI REMOTE CONTROL * Option for product model with"/P" only.
4. WHDI FUNCTION 1. Connect WHDI transmitter with computer or camcorder via HDMI interface, display as below. 2. Press the EXIT button on remote control to activate “Select Video Source” function, and the transmitter matched will be displayed as follows. * Option for product model with"/P" only.
3. Press the ADD button on remote control to activate registration function as follows. 4. Then long press Code key on WHDI transmitter to activate connecting interface as follows. 5. Waiting for connection completed. * Option for product model with"/P" only.
5. INSTALLATION OF SUNSHADE COVER AND BATTERY PLATE Installation of sunshade cover： Disassembly of sunshade cover： Installation steps Installation completed Disassembly steps Disassembly completed Steps of sunshade cover on / off: Please follow the instructions steps, or may damage the cover. Open Step: Closed steps: Do not press the edge in the under of the cover, otherwise it will result in open failure. * Option for product model with"/P" only.
6. DV BATTERY MOUNT PLATE Standard mounts process Following three types of battery plates are suitable for this device, model F970, QM91D, DU21 & LP-E6 (choose 2 out of 4). MODEL: F-970 MODEL: QM91D MODEL: DU21 MODEL: LP-E6 DV Battery Mount Plate: DV Battery Mount Plate Specification: Model DU21 for battery of Panasonic DV: NV-GS/PV-GS/DZ-MV/GS/H28/H258/H288GK series, comply with Panasonic battery DU06/VBD140/SANYO DZhs301sw/Hitachi DZ-HS303SW/BZ-BP14S/DZ3200/BP07W.
V-mount battery plate (optional): Please refer to GP-L130AB type battery specifications. Anton Bauer mount battery plate (optional): Please refer to GP-L130B type battery specifications. 7. SETTING MENU Before setting the functions, please make sure the device is connected correctly. When power on, press BRI/M/SEL knob on the device, function menus will pop-up on the screen.
ITEMS OPTIONS Color Temp 6500ºK/7500 ºK/9300 ºK/User Red Note: Only available Green under “User” mode to meet the color value Blue you need. Check Field OFF，MONO，Red, Green and Blue Aspect Ratio Full Screen,4:3 and 16:9 Pixel-to-Pixel ON/OFF Camera 480P (5DII Mode) /1080I (5DIII Mode) H/V delay OFF,H&V Delay, V Delay and H Delay ITEMS OPTIONS Center Marker Screen Markers ITEMS Language PIP Input Format OSD LOGO Freeze Input Image Flip *Peaking * Option for product model with"/P" only.
Assistant Func. Manufacturer Default ISP Manual/Auto OK/Cancel(Reverse the SAT / A DJ knob to select "OK") For program upgrades (Please reboot your computer if press accidentally!) Function of buttons and knobs can be customized by users’ needs. Functions of F1-F4 buttons can also be customized: ·Aspect Ratio ·Check Field ·Freeze Input ·Center Marker ·Underscan ·H/V delay ·Color Bar ·Screen Marker ·Zoom ·Camera ·Pixel-to-Pixel ·PIP ·*Peaking ·*False Color ·*Exposure ·*Histogram.
8. ACCESSORIES Standard accessories: 1. Flexible Folding Sun Shade Cover 1 piece 2.WHDI Accessories 1 pair 3. Battery Plate (2 out of 4) 2 pieces 3. Manual 1 copy 4. HDMI Type A-C 1 piece 5. DC Adapter 1 piece Optional accessories 1. Anton Bauer Mount Battery Plate 1piece 2. V-mount Battery Plate 1piece 3. Shoe Mount (for camera only) 1piece 4. Li-ion Battery 1piece 9.
10. TROUBLE SHOOTING 1. Only black-and-white display: Check whether the color saturation is properly setup. 2. Power on but no pictures: Check whether the cables of Video, HDMI, YPbPr and WHDI are correctly connected. Please use the standard power adapter coming with the product package. Improper power input may cause the device. 3. Wrong or abnormal colors: Check whether the cables are correctly and properly connected. Broken or loose pins of the cables may cause a bad connection. 4.
15
