FPV MONITOR User Manual
Important Safety Instructions: Please read User Guide before using this product. Please keep User Guide for future reference. Please read the cautions to prevent possible danger and loss of property. Contents FEATURES...................................................................................................................................... 2 CAUTIONS .....................................................................................................................................
FEATURES High resolution: 1280×800; High brightness: 400cd/㎡; High contrast: 800:1; Dual 5.8GHz receivers for optional; Channel auto searching; Auto antenna switching to get best signal; Multiple Picture-in-Picture (PIP) modes; 4-hour timer & alert indicator. CAUTIONS Please do not place the display screen towards the ground. Please avoid heavy impact or drop onto the ground. Please do NOT use chemical solutions to clean this product.
INITIAL SETUP Unpacking Carefully unpack the monitor and verify that the following items are included: Monitor Sun shade AV input cable AV output cable 12V DC adapter 5.8G antenna 2600mAh built-in battery Manual Inspect the unit for any physical damage that may have occurred during shipping. Should there be any damage, please immediately contact us. Optional Accessories Additional accessory options for extra requirements.
PRODUCT DESCRIPTION 1. 2. 3. 4. 5. AUTO: channel auto searching PIP: picture-in-picture mode. A/V: video& 5.8G switch. HDMI: switch to HDMI state. Battery indicator Status 1: the indicator light turns to fully red when battery charging. Status 2: the indicator light turns to half red when powered with DC power, but not with battery. Status 3: the indicator light turns to off when charge completely or use only with battery. 6. M/E: to activate OSD (on-screen display) menu.
1. 2. Antenna port. Frequency control. (Please refer to aerial photography signal receiver) 3. OUT: video output interface. 4. IN: video input interface. 5. Bracket mount (Depth limit 0.5cm). 6. Earphone jack. 7. HDMI input interface. 8. POWER: DC12V power input. 1. 2. 3. VESA mounting interface. Speaker. 2600mA battery slot (built-in).
AERIAL PHOTOGRAPHY SIGNAL RECEIVER Frequency Chart 0: ON; 1:OFF Frequency / L.O. CS1 B1:5.865GHz/5.385GHz B2:5.845GHz/5.365GHz B3:5.825GHz/5.345GHz B4:5.805GHz/5.325GHz B5:5.785GHz/5.305GHz B6:5.765GHz/5.285GHz B7:5.745GHz/5.265GHz B8:5.725GHz/5.245GHz 1 0 1 0 1 0 1 0 C1:5.733GHz/5.253GHz C2:5.752GHz/5.272GHz C3:5.771GHz/5.291GHz C4:5.790GHz/5.310GHz C5:5.809GHz/5.329GHz C6:5.828GHz/5.348GHz C7:5.847GHz/5.367GHz C8:5.866GHz/5.386GHz 0 1 0 1 0 1 0 1 D1:5.705GHz/5.225GHz D2:5.685GHz/5.205GHz D3:5.
Frequency Control Demo *339/DW TIPS: To avoid adjacent frequency disturbance, please ensure two transmitters frequency difference more than 20MHz. For example: (ANT1) 5800MHz - (ANT2) 5790MHz = 10MHz < 20MHz (×) (ANT1) 5828MHz - (ANT2) 5790MHz = 38MHz > 20MHz (√) Wireless Signal Receiving Antenna Connecting 5.8GHz antenna or omnidirectional antenna with antenna port on device. Activate channel auto searching function by pressing “AUTO” button to receive audio and video signal.
Video Input Cable 1. 2. 3. Video input interface. Yellow: video 1 input plug. White: video 2 input plug. MENU SETTING Before setting the functions, please make sure the device is connected correctly. Shortcut keys The image menu When power on, press “< / >” key on the device, brightness will appear at the bottom of the screen, then press the MENU button to select brightness, sharpness, contrast, saturation, volume, tint, MENU and Exit.
Menu Operation When power on, press “MENU” on the device. The menu of function setting will display on the screen. Press < / > buttons to choose menu; then press ENTER to confirm; after that, press MENU to return. PICTURE ITEMS Brightness Contrast Saturation Tint Sharpness Color Temp OPTIONS 0 – 100 0 – 100 0 – 100 0 – 100 0 – 100 6500K, 7300K, 9300K, User Color Temp R Note: Available only under “User” mode to choose the Color Temp G color value you need.
MARKER ITEMS Center Marker Safety Marker FPV Marker OPTIONS ON, OFF OFF, 95%, 93%, 90%, 88%, 85%, 80% ON, OFF DISPLAY ITEMS Aspect Ratio Pixel-to-Pixel Underscan Zoom Image Flip Freeze Input PIP Mode OPTIONS Full Screen, 4: 3, 16: 9, 1.85: 1, 2.
DSLR AUX & AUDIO ITEMS Camera H / V Delay Check Field Color Bar Volume OPTIONS ON, OFF ( Only HDMI mode) OFF, H&V, V, H OFF, Mono, Red, Green, Blue ON, OFF 0 – 100 SYSTEM ITEMS Language LOGO Back Light Time Manufacture Default ISP OPTIONS English, Chinese ON, OFF 0 – 100 0 – 240 (Minute) ON, OFF 11
PAPAMETERS Panel Physical Resolution Brightness Contrast Viewing Angle Input Voltage Aspect Ratio Current Power Consumption Operating Temperature Storage Temperature Dimension (LWD) Weight 7” LED Backlit ( IPS ) 1280×800 400cd/㎡ 800:1 178°/178°（H/V） DC 7~24V 16:9 1300mA ≤18W -20 ℃~ 60℃ -30 ℃~ 70℃ 185×126×30 (mm) 385g TROUBLE SHOOTING 1. Only black-and-white display: Check whether the brightness or color saturation is properly setup or not. 2.
13
