Field MONITOR User Manual Important Safety Instructions: Please read User Guide before using this product.
Please keep User Guide for future reference. Please read the cautions to prevent possible danger and loss of property. Contents FEATURES...................................................................................................................................... 2 CAUTIONS ..................................................................................................................................... 2 INITIAL SETUP ..........................................................................
FEATURES High resolution: 1280×800; High brightness: 400cd/㎡; High contrast: 800:1; Built-in battery & battery level; HDMI & AV input; Foldable sun shade; CAUTIONS Please do not place the display screen towards the ground. Please avoid heavy impact or drop onto the ground. Please do NOT use chemical solutions to clean this product. Please wipe with a clean soft cloth to maintain the brightness of the surface. Please do not block any vent hole.
INITIAL SETUP Unpacking Carefully unpack the monitor and verify that the following items are included: Monitor Sun shade AV input cable AV output cable 12V DC adapter HDMI A/C cable Shoe mount 2600mAh built-in battery Manual Inspect the unit for any physical damage that may have occurred during shipping. Should there be any damage, please immediately contact us. Optional Accessories Additional accessory options for extra requirements.
PRODUCT DESCRIPTION 1. 2. 3. 4. F1、F2 User-definable buttons. A/V: switch to AV state. HDMI: switch to HDMI state. Battery indicator Status 1: the indicator light turns to fully red when battery charging. Status 2: the indicator light turns to half red when powered with DC power, but not with battery. Status 3: the indicator light turns to off when charge completely or use only with battery. 5. M/E: to activate OSD (on-screen display) menu.
1. 2. 3. 4. 5. 6. OUT: video output interface. IN: video input interface. Bracket mount (Depth limit 0.5cm). Earphone jack. HDMI input interface. POWER: DC12V power input. 1. 2. 3. VESA mounting interface. Speaker. 2600mA battery slot (built-in).
INSTALLATION OF SUNSHADE DV BATTERY MOUNT PLATE (OPTIONAL) Following three types of battery plates are suitable for this device, model F970, QM91D, DU21 & LP-E6 (choose 2 out of 4).
MODEL: F-970 MODEL: QM91D MODEL: DU21 MODEL: LP-E6 DV Battery Mount Plate: DV Battery Mount Plate Specification: Model DU21 for battery of Panasonic DV: NV-GS/PV-GS/DZ-MV/GS/H28/H258/H288GK series, comply with Panasonic battery DU06/VBD140/SANYO DZhs301sw/Hitachi DZ-HS303SW/BZ-BP14S/DZ3200/BP07W. Model QM91D for battery of SONY DV: DSCR1/F/S/MVCCD/E/HC15E/HC1E/AE1u/DCRTRV828/E/CCD-TRV 116/DCR-DVD/PS105K/300K/10P/1E series.
Video Input Cable 1. 2. 3. Video input interface. Yellow: video 1 input plug. White: video 2 input plug. MENU SETTING Before setting the functions, please make sure the device is connected correctly. Shortcut keys The image menu When power on, press “< / >” key on the device, brightness will appear at the bottom of the screen, then press the MENU button to select brightness, sharpness, contrast, saturation, volume, tint, MENU and Exit.
Battery: battery level indicator. Voltage: voltage indicator (invisible when charging) Timer: available for flying countdown or battery level countdown. Channel frequency: searching channel automatically. Signal: wireless signal sensitivity indicator. Menu Operation When power on, press “MENU” on the device. The menu of function setting will display on the screen. Press < / > buttons to choose menu; then press ENTER to confirm; after that, press MENU to return.
MARKER ITEMS Center Marker Safety Marker OPTIONS ON, OFF OFF, 95%, 93%, 90%, 88%, 85%, 80% DISPLAY ITEMS Aspect Ratio Pixel-to-Pixel Underscan Zoom Image Flip Freeze Input OPTIONS Full Screen, 4: 3, 16: 9, 1.85: 1, 2.
DSLR AUX & AUDIO ITEMS Camera H / V Delay Check Field Color Bar Volume OPTIONS ON, OFF ( Only HDMI mode) OFF, H&V, V, H OFF, Mono, Red, Green, Blue ON, OFF 0 – 100 SYSTEM ITEMS Language LOGO Back Light Manufacture Default ISP OPTIONS English, Chinese ON, OFF 0 – 100 ON, OFF 11
PAPAMETERS Panel Physical Resolution Brightness Contrast Viewing Angle Input Voltage Aspect Ratio Current Power Consumption Operating Temperature Storage Temperature Dimension (LWD) Weight 7” LED Backlit ( IPS ) 1280×800 400cd/㎡ 800:1 178°/178°（H/V） DC 7~24V 16:9 580mA ≤7W -20 ℃~ 60℃ -30 ℃~ 70℃ 185×126×30 (mm) 360g TROUBLE SHOOTING 1. Only black-and-white display Check whether the brightness or color saturation is properly setup or not. 2. No image Check the power input and connection 3.
13
