Instructions

Steady green: Status normal
Flashing green:
Transming
Flashing green / amber:
Linking mode
Steady red: Cannot contact server
3
Seng up the App
3.1 Download & open the App
Download the Lightwave Link Plus App from the
App Store. Open the App and follow the instrucons
and tutorials which will take you through the setup
procedure.
You can also use the Lightwave Web App to set up and
control your Link Plus. This is a more extensive plaorm
very suited to seng up and viewing large installs. This
can be accessed at www.lightwaverf.com.
3.2 Follow the in-app instrucons
Once your Link Plus is set up, you will be able to register
mulple smartphones or tablets to control any number
of Lightwave devices in your home.
HomeKit
You will also be able to control Lightwave devices via
HomeKit using the code below. To do this, open the
Home app on your iPhone or iPad, select the Link Plus
and manually enter the code.
Communicaon between iPhone, iPad, or iPod
touch and the HomeKit-enabled Link Plus is secured
by HomeKit technology. Controlling this HomeKit
enabled accessory automacally and away from home
requires an Apple TV with tvOS 10.3.2 or later or an
iPad with iOS 10.3.2 or later set up as a home hub.
Apple, iPhone, iPad and iPod touch are trademarks of
Apple Inc., registered in the U.S. and other countries.
HomeKit is a trademark of Apple Inc.
LED Indicator lights
xx-xx-xx-xx
www.lightwaverf.com
Need some help?
[phone]