Data Sheet

SF22/C LiDAR sensor
Datasheet
3. Quickstart guide
Caution
The SF22/C laser rangefinder contains a laser and should never be aimed at a person or an animal. Do not
look at the beam directly with optical instruments.
● Download the !LightWare Studio! application to your PC or laptop.
● Instal and start the application by following the prompts.
● Connect the SF22/C to the PC using the USB cable provided.
● The SF22/C will automatically be detected by the application.
● Settings options will be displayed in the main window along with a visualisation of the data coming from the SF22/C.
● Change the settings to suit your application.
● Unplug the USB cable.
Once the settings have been entered, your host controller can communicate with the SF22/C through the serial or I2C ports.
API support is available from the LightWare !API repository. To test the serial and I2C ports the !LightWare Communication
Adaptor! is available.
Firmware updates and additional features will become available from time to time. These can be installed into the SF22/C
using the USB port and the !LightWare Studio! application.
5 of 8