Datasheet

ManualsBrandsLightWare Optoelectronics ManualsLIDARLightware SF000 Ultra Small and Light Laser Rangefinder

SF000 LiDAR sensor

Datasheet



5. Hardware



5.1. Dimension drawings



Dimension drawings, units in mm



5.2. Installation



SF000 requires a clear line-of-sight to measure distance to a target surface. It can be mounted with a vertical or                   

horizontal lens orientation.



They can be mounted in a downward facing orientation for altimetery, terrain following or precision landing               

applications. For terrain following, install the rangefinder at an angle to reduce lag time in reaction. The angle                 

depends on the speed traveled, and the overall system lag, but should be between 20 and 45 degrees. They can be                    

mounted forward facing orientation for sense-and-avoid or position-hold applications.





Mounting accessories can be purchased, or downloaded from the LightWare website.





7 of 8

