Guide

You can register your device by clicking on the Register to receive firmware update notifications banner.
Click on the USB adaptor to establish a connection. From here you can access tools to inspect and configure the
LW24/C.
LightWare Studio device information screen
Click on the Upgrade tool in the left panel. It is recommended to make sure your LW24/C has the latest firmware. You
can see the changes that have been made to each version, and the option of downgrading is also available. If you
choose to upgrade, then click the Install button and follow the instructions.
LW24/C/RS microLiDAR™ sensor - Product guide | Version 0 | 03 March 2022 Page 7 of 38