Guide
Environmental
Operating temperature
-10 ... + 50°C / 14 … 122 °F
Shipping temperature
- 40 … + 80 °C / - 40 … +176 °F
Accessories
Main cable
Tensility International Corp Straight 4 position female to wire, 1.83 m (DigiKey:
839-1553-ND)
Optional
Tensility International Corp Right-angled 4 position female to wire, 1.83 m (DigiKey:
839-10-03635-ND)
Default settings
Serial port settings
115200 baud, 8 data bits, 1 stop bit, no parity, no handshaking
I2C address
0x66 (Hex), 102 (Dec)
Update rate
48 readings per second
Quickstart guide
LightWare Studio is an application (available for Windows, macOS, and Linux) that can configure, update, and visualize
data for the LW24/C.
In this guide we will use LightWare Studio to view distance data from the LW24/C.
LightWare Studio can be found here. Download the version compatible with your operating system and proceed with
installation. You can safely install over an existing version of LightWare Studio if you are upgrading.
Insert the communication cable into the LW24/C and a serial to USB adaptor.
You will need a serial to USB adaptor to connect the LW24/C to a computer. Any serial TTL 3.3 V USB adaptor will work,
this guide uses one available from LightWare LLChere.
LW24/C/RS microLiDAR™ sensor - Product guide | Version 0 | 03 March 2022 Page 5 of 38