Guide

If you require more control than the existing APIs offer or need to port the protocol to a different platform, then you
can use the information here to build a compatible system.
The LW24/C will always be the slave on the I2C interface. Therefore, data will only be transmitted when requested by
the master.
Streaming data is only available through the Serial interface.
Requests are made using one of the available commands. When a read request is issued then the response will contain
the requested data. When a write request is issued then there is no response generated.
Default I2C interface properties
● Address: 0x66
LW24/C/RS microLiDAR™ sensor - Product guide | Version 0 | 03 March 2022 Page 25 of 38