Guide

Enable smoothing filter
The smoothing filter is used to remove noise from the measurements.
Smoothing filter strength
Determines response of the smoothing filter.
Firmware change log
Upgrading firmware
The LW24/C firmware can be upgraded by using LightWare Studio. Download LightWare Studio here.
Follow the Quick start with LightWare Studio guide for details on downloading and using LightWare Studio.
2.0.0
Notes:
● Initial release.
Safety & maintenance
Safety overview
The LW24/C should not be disassembled or modified in any way. The laser eye safety rating depends on the
mechanical integrity of the optics and electronics. There are no user serviceable parts and maintenance, or repair must
only be carried out by the manufacturer or a qualified service agent.
Always observe the following safety precautions when operating the LW24/C. Failure to comply with these precautions
or specific warnings given in this product guide violates the safety standards of the intended use for the sensor and
may damage the sensor. LightWare LLC assumes no liability for failure to comply with these requirements.
The LW24/C is not field serviceable. For any repairs, the equipment should be completely isolated, removed then
packaged carefully. Please visit LightWare LLC’srefund policyfor Return Merchandise Authorization (RMA) details, or
contact[e-mail].
LW24/C/RS microLiDAR™ sensor - Product guide | Version 0 | 03 March 2022 Page 17 of 38